Re: [PATCH v4 1/2] dt-bindings: Documentation for qcom,eud

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thank you very much Bryan for your review comments, will be working on your and other maintainers comment on this patchset and will be posting new patchset soon.

On 2/4/2020 8:21 AM, Bryan O'Donoghue wrote:
On 31/01/2020 04:43, Avaneesh Kumar Dwivedi wrote:
Documentation for Embedded USB Debugger (EUD) device tree bindings.

Signed-off-by: Satya Durga Srinivasu Prabhala <satyap@xxxxxxxxxxxxxx>
Signed-off-by: Prakruthi Deepak Heragu <pheragu@xxxxxxxxxxxxxx>
Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@xxxxxxxxxxxxxx>
---
  .../devicetree/bindings/soc/qcom/qcom,msm-eud.txt  | 43 ++++++++++++++++++++++
  1 file changed, 43 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,msm-eud.txt

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,msm-eud.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,msm-eud.txt
new file mode 100644
index 0000000..57476ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,msm-eud.txt
@@ -0,0 +1,43 @@
+* Qualcomm Technologies Inc Embedded USB Debugger (EUD)
+
+The EUD (Embedded USB Debugger) is a mini-USB hub implemented
+on chip to support the USB-based debug and trace capabilities.

on chip to support USB-based debug and trace capabilities.
OK

+
+Required properties:
+
+ - compatible:  Should be "qcom,msm-eud"
+ - interrupts:  Interrupt number
+ - reg: Should be address and size of EUD register space
+
+EUD notifies clients for VBUS attach/detach and charger enable/disable
+events. The link between event consumer(i.e.USB controller for vbus
missing space
consumer (i.e.
Ok

+attach/detach event) and EUD is established via a directed graph. EUD
+act
The EUD acts
OK

as an output link and clients of EUD as input link of this directed
+graph. Events flows through the directed graph only during debug mode.

Probably this is a very obvious question but, you mean debug and trace events or do you mean VBUS/charger events?
Directed graph is to show VBUS and charger events flow.

+
+An example for EUD device node:
+
+    eud: qcom,msm-eud@88e0000 {
+        compatible = "qcom,msm-eud";
+        interrupts = <GIC_SPI 492 IRQ_TYPE_LEVEL_HIGH>;
+        reg = <0x88e0000 0x4000>;
+        usb_con: connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+            port {
+                eud_usb_output: endpoint {
+                    remote-endpoint = <&eud_usb3_input>;
+                };
+            };
+        };
+    };
+
+An example for EUD client:
+
+    usb3 {
+        port {
+            eud_usb3_input: endpoint {
+                remote-endpoint = <&eud_usb_output>;
+            };
+        };
+    };

--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux