Hi,
>Hi,
>
>Jayshri Pawar wrote:
>> This patch adds additional parameter alt to config_ep_by_speed function.
>> This additional parameter allows to improve this function and
>> find proper usb_ss_ep_comp_descriptor.
>>
>> Problem has appeared during testing f_tcm (BOT/UAS) driver function.
>>
>> f_tcm function for SS use array of headers for both BOT/UAS alternate
>> setting:
>>
>> static struct usb_descriptor_header *uasp_ss_function_desc[] = {
>> (struct usb_descriptor_header *) &bot_intf_desc,
>> (struct usb_descriptor_header *) &bot_uasp_ss_bi_desc,
>> (struct usb_descriptor_header *) &bot_bi_ep_comp_desc,
>> (struct usb_descriptor_header *) &bot_uasp_ss_bo_desc,
>> (struct usb_descriptor_header *) &bot_bo_ep_comp_desc,
>>
>> (struct usb_descriptor_header *) &uasp_intf_desc,
>> (struct usb_descriptor_header *) &bot_uasp_ss_bi_desc,
>> (struct usb_descriptor_header *) &uasp_bi_ep_comp_desc,
>> (struct usb_descriptor_header *) &uasp_bi_pipe_desc,
>> (struct usb_descriptor_header *) &bot_uasp_ss_bo_desc,
>> (struct usb_descriptor_header *) &uasp_bo_ep_comp_desc,
>> (struct usb_descriptor_header *) &uasp_bo_pipe_desc,
>> (struct usb_descriptor_header *) &uasp_ss_status_desc,
>> (struct usb_descriptor_header *) &uasp_status_in_ep_comp_desc,
>> (struct usb_descriptor_header *) &uasp_status_pipe_desc,
>> (struct usb_descriptor_header *) &uasp_ss_cmd_desc,
>> (struct usb_descriptor_header *) &uasp_cmd_comp_desc,
>> (struct usb_descriptor_header *) &uasp_cmd_pipe_desc,
>> NULL,
>> };
>>
>> The first 5 descriptors are associated with BOT alternate setting,
>> and others are associated with UAS.
>>
>> During handling UAS alternate setting f_tcm drivr invokes
>> config_ep_by_speed and this function sets incorrect companion endpoint
>> descriptor in usb_ep object.
>>
>> Instead setting ep->comp_desc to uasp_bi_ep_comp_desc function in this
>> case set ep->comp_desc to bot_uasp_ss_bi_desc.
>>
>> This is due to the fact that it search endpoint based on endpoint
>> address:
>>
>> for_each_ep_desc(speed_desc, d_spd) {
>> chosen_desc = (struct usb_endpoint_descriptor *)*d_spd;
>> if (chosen_desc->bEndpoitAddress == _ep->address)
>> goto ep_found;
>> }
>>
>> And in result it uses the descriptor from BOT alternate setting
>> instead UAS.
>>
>> Finally, it causes that controller driver during enabling endpoints
>> detect that just enabled endpoint for bot.
>>
>> Signed-off-by: Jayshri Pawar <jpawar@xxxxxxxxxxx>
>> Signed-off-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
>> ---
>> drivers/usb/gadget/composite.c | 46 ++++++++++++++------
>> drivers/usb/gadget/function/f_acm.c | 7 +--
>> drivers/usb/gadget/function/f_ecm.c | 7 +--
>> drivers/usb/gadget/function/f_eem.c | 4 +-
>> drivers/usb/gadget/function/f_fs.c | 3 +-
>> drivers/usb/gadget/function/f_hid.c | 4 +-
>> drivers/usb/gadget/function/f_loopback.c | 2 +-
>> drivers/usb/gadget/function/f_mass_storage.c | 5 ++-
>> drivers/usb/gadget/function/f_midi.c | 2 +-
>> drivers/usb/gadget/function/f_ncm.c | 7 +--
>> drivers/usb/gadget/function/f_obex.c | 4 +-
>> drivers/usb/gadget/function/f_phonet.c | 4 +-
>> drivers/usb/gadget/function/f_rndis.c | 7 +--
>> drivers/usb/gadget/function/f_serial.c | 4 +-
>> drivers/usb/gadget/function/f_sourcesink.c | 11 +++--
>> drivers/usb/gadget/function/f_subset.c | 4 +-
>> drivers/usb/gadget/function/f_tcm.c | 36 +++++++--------
>> drivers/usb/gadget/function/f_uac1_legacy.c | 2 +-
>> drivers/usb/gadget/function/f_uvc.c | 5 ++-
>> drivers/usb/gadget/function/u_audio.c | 4 +-
>> include/linux/usb/composite.h | 2 +-
>> 21 files changed, 99 insertions(+), 71 deletions(-)
>>
>
>I think we should create a new function and keep the old
>config_ep_by_speed() for default alt-setting (e.i. have
>config_ep_by_speed calls the new function with default alt-setting 0).
>This way, we can keep compatibility with old function drivers and
>minimize changes. At least that's what we did.
>
I don't think we need the separate function.
If we set last parameter alt=0 then this function will work in the same way as old one.
Regards,
Pawel
>BR,
>Thinh
