usb 2.0 crashing with DVB-S2 receiver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I have installed mythbuntu on a HP Pavilion and attached a Tevii S650 USB DVB-S2 receiver to it.

I have installed latest v4l drivers and firmware from www.Tevii.com

When the receiver is attached everything works just fine:
[ 350.217038] usb 1-8: new high speed USB device using ehci_hcd and address 5 [ 350.349357] usb 1-8: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
[  350.349872] usb 1-8: configuration #1 chosen from 1 choice
[ 350.350188] dvb-usb: found a 'TeVii S650 USB2.0' in cold state, will try to load a firmware
[  350.350195] usb 1-8: firmware: requesting dvb-usb-dw2104.fw
[  350.405237] dvb-usb: downloading firmware from file 'dvb-usb-dw2104.fw'
[  350.405244] dw2102: start downloading DW210X firmware
[  350.532045] dvb-usb: found a 'TeVii S650 USB2.0' in warm state.
[ 350.532567] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  350.532804] DVB: registering new adapter (TeVii S650 USB2.0)
[  350.724785] dvb-usb: MAC address: f54ba918
[  350.730401] dw2102: Attached cx24116!
[  350.730404]
[ 350.730412] DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)... [ 350.730870] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:13.2/usb1/1-8/input/input7
[  350.762296] dvb-usb: schedule remote query interval to 150 msecs.
[ 350.762309] dvb-usb: TeVii S650 USB2.0 successfully initialized and connected.


I am able to watch FTA channels with mythtv for up to an hour but then usb seems to reset and i loose usb 2.0 functionality:
[ 204.032228] ehci_hcd 0000:00:13.2: fatal error
[ 204.033137] ehci_hcd 0000:00:13.2: HC died; cleaning up
[ 204.033216] usb 1-8: USB disconnect, address 5
[ 204.056465] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
[ 204.056474] i2c-adapter i2c-1: firmware: requesting dvb-fe-cx24116.fw
[ 204.086402] cx24116_firmware_ondemand: Waiting for firmware upload(2)...
[ 205.029088] cx24116_cmd_execute() Firmware not responding
[ 205.029103] cx24116_firmware_ondemand: Writing firmware to device failed
[ 205.029191] cx24116_firmware_ondemand: Firmware upload failed
[ 205.029203] cx24116_cmd_execute(): Unable initialise the firmware
[ 205.426985] ohci_hcd 0000:00:13.1: OHCI Unrecoverable Error, disabled
[ 205.427016] ohci_hcd 0000:00:13.1: HC died; cleaning up

Any clues as of how to solve this? I am using the latest firmware avalible, version and lsusb output before and after crash below


anders@srv01:~$ uname -r
2.6.28-11-generic

lsusb before crash:
Bus 001 Device 004: ID 9022:d650
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 002 Device 002: ID 046d:c03d Logitech, Inc. M-BT69a Pilot Optical Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

lsusb after crash:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 002 Device 002: ID 046d:c03d Logitech, Inc. M-BT69a Pilot Optical Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

lsusb -v before crash:
Bus 001 Device 005: ID 9022:d650
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0
 bDeviceProtocol         0
 bMaxPacketSize0        64
 idVendor           0x9022
 idProduct          0xd650
 bcdDevice            0.00
 iManufacturer           1 Cypress
 iProduct                2 EZ-USB FX2
 iSerial                 0
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           32
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0x80
     (Bus Powered)
   MaxPower                0mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           2
     bInterfaceClass       255 Vendor Specific Class
     bInterfaceSubClass      0
     bInterfaceProtocol      0
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x82  EP 2 IN
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0200  1x 512 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0002  1x 2 bytes
       bInterval               0
Device Qualifier (for other device speed):
 bLength                10
 bDescriptorType         6
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0
 bDeviceProtocol         0
 bMaxPacketSize0        64
 bNumConfigurations      1
Device Status:     0x0000
 (Bus Powered)

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         0 Full speed (or root) hub
 bMaxPacketSize0        64
 idVendor           0x1d6b Linux Foundation
 idProduct          0x0002 2.0 root hub
 bcdDevice            2.06
 iManufacturer           3 Linux 2.6.28-11-generic ehci_hcd
 iProduct                2 EHCI Host Controller
 iSerial                 1 0000:00:13.2
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           25
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xe0
     Self Powered
     Remote Wakeup
   MaxPower                0mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         9 Hub
     bInterfaceSubClass      0 Unused
     bInterfaceProtocol      0 Full speed (or root) hub
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0004  1x 4 bytes
       bInterval              12
Hub Descriptor:
 bLength              11
 bDescriptorType      41
 nNbrPorts             8
 wHubCharacteristic 0x000a
   No power switching (usb 1.0)
   Per-port overcurrent protection
 bPwrOn2PwrGood       10 * 2 milli seconds
 bHubContrCurrent      0 milli Ampere
 DeviceRemovable    0x00 0x00
 PortPwrCtrlMask    0xff 0xff
Hub Port Status:
  Port 1: 0000.0100 power
  Port 2: 0000.0100 power
  Port 3: 0000.0100 power
  Port 4: 0000.0100 power
  Port 5: 0000.0100 power
  Port 6: 0000.0100 power
  Port 7: 0000.0100 power
  Port 8: 0000.0503 highspeed power enable connect
Device Status:     0x0003
 Self Powered
 Remote Wakeup Enabled

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               1.10
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         0 Full speed (or root) hub
 bMaxPacketSize0        64
 idVendor           0x1d6b Linux Foundation
 idProduct          0x0001 1.1 root hub
 bcdDevice            2.06
 iManufacturer           3 Linux 2.6.28-11-generic ohci_hcd
 iProduct                2 OHCI Host Controller
 iSerial                 1 0000:00:13.1
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           25
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xe0
     Self Powered
     Remote Wakeup
   MaxPower                0mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         9 Hub
     bInterfaceSubClass      0 Unused
     bInterfaceProtocol      0 Full speed (or root) hub
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0002  1x 2 bytes
       bInterval             255
Hub Descriptor:
 bLength               9
 bDescriptorType      41
 nNbrPorts             4
 wHubCharacteristic 0x0002
   No power switching (usb 1.0)
   Ganged overcurrent protection
 bPwrOn2PwrGood        2 * 2 milli seconds
 bHubContrCurrent      0 milli Ampere
 DeviceRemovable    0x00
 PortPwrCtrlMask    0xff
Hub Port Status:
  Port 1: 0000.0100 power
  Port 2: 0000.0100 power
  Port 3: 0000.0100 power
  Port 4: 0000.0100 power
Device Status:     0x0003
 Self Powered
 Remote Wakeup Enabled

Bus 002 Device 003: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               1.10
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0
 bDeviceProtocol         0
 bMaxPacketSize0         8
 idVendor           0x058f Alcor Micro Corp.
 idProduct          0x9360 8-in-1 Media Card Reader
 bcdDevice            1.00
 iManufacturer           1
 iProduct                2 USB Reader
 iSerial                 3 2004888
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           32
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0x80
     (Bus Powered)
   MaxPower              100mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           2
     bInterfaceClass         8 Mass Storage
     bInterfaceSubClass      6 SCSI
     bInterfaceProtocol     80 Bulk (Zip)
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x01  EP 1 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0040  1x 64 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x82  EP 2 IN
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0040  1x 64 bytes
       bInterval               0
Device Status:     0x0000
 (Bus Powered)

Bus 002 Device 002: ID 046d:c03d Logitech, Inc. M-BT69a Pilot Optical Mouse
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0
 bDeviceProtocol         0
 bMaxPacketSize0         8
 idVendor           0x046d Logitech, Inc.
 idProduct          0xc03d M-BT69a Pilot Optical Mouse
 bcdDevice           20.00
 iManufacturer           1 Logitech
 iProduct                2 USB-PS/2 Optical Mouse
 iSerial                 0
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           34
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xa0
     (Bus Powered)
     Remote Wakeup
   MaxPower               98mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         3 Human Interface Device
     bInterfaceSubClass      1 Boot Interface Subclass
     bInterfaceProtocol      2 Mouse
     iInterface              0
       HID Device Descriptor:
         bLength                 9
         bDescriptorType        33
         bcdHID               1.10
         bCountryCode            0 Not supported
         bNumDescriptors         1
         bDescriptorType        34 Report
         wDescriptorLength      50
        Report Descriptors:
          ** UNAVAILABLE **
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0004  1x 4 bytes
       bInterval              10
Device Status:     0x0000
 (Bus Powered)

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               1.10
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         0 Full speed (or root) hub
 bMaxPacketSize0        64
 idVendor           0x1d6b Linux Foundation
 idProduct          0x0001 1.1 root hub
 bcdDevice            2.06
 iManufacturer           3 Linux 2.6.28-11-generic ohci_hcd
 iProduct                2 OHCI Host Controller
 iSerial                 1 0000:00:13.0
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           25
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xe0
     Self Powered
     Remote Wakeup
   MaxPower                0mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         9 Hub
     bInterfaceSubClass      0 Unused
     bInterfaceProtocol      0 Full speed (or root) hub
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0002  1x 2 bytes
       bInterval             255
Hub Descriptor:
 bLength               9
 bDescriptorType      41
 nNbrPorts             4
 wHubCharacteristic 0x0002
   No power switching (usb 1.0)
   Ganged overcurrent protection
 bPwrOn2PwrGood        2 * 2 milli seconds
 bHubContrCurrent      0 milli Ampere
 DeviceRemovable    0x00
 PortPwrCtrlMask    0xff
Hub Port Status:
  Port 1: 0000.0303 lowspeed power enable connect
  Port 2: 0000.0100 power
  Port 3: 0000.0103 power enable connect
  Port 4: 0000.0100 power
Device Status:     0x0003
 Self Powered
 Remote Wakeup Enabled

lsusb -v after crash:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               1.10
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         0 Full speed (or root) hub
 bMaxPacketSize0        64
 idVendor           0x1d6b Linux Foundation
 idProduct          0x0001 1.1 root hub
 bcdDevice            2.06
 iManufacturer           3 Linux 2.6.28-11-generic ohci_hcd
 iProduct                2 OHCI Host Controller
 iSerial                 1 0000:00:13.1
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           25
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xe0
     Self Powered
     Remote Wakeup
   MaxPower                0mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         9 Hub
     bInterfaceSubClass      0 Unused
     bInterfaceProtocol      0 Full speed (or root) hub
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0002  1x 2 bytes
       bInterval             255
Hub Descriptor:
 bLength               9
 bDescriptorType      41
 nNbrPorts             4
 wHubCharacteristic 0x0002
   No power switching (usb 1.0)
   Ganged overcurrent protection
 bPwrOn2PwrGood        2 * 2 milli seconds
 bHubContrCurrent      0 milli Ampere
 DeviceRemovable    0x00
 PortPwrCtrlMask    0xff
Hub Port Status:
  Port 1: 0000.0100 power
  Port 2: 0000.0100 power
  Port 3: 0000.0100 power
  Port 4: 0001.0101 C_CONNECT power connect
Device Status:     0x0003
 Self Powered
 Remote Wakeup Enabled

Bus 002 Device 003: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               1.10
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0
 bDeviceProtocol         0
 bMaxPacketSize0         8
 idVendor           0x058f Alcor Micro Corp.
 idProduct          0x9360 8-in-1 Media Card Reader
 bcdDevice            1.00
 iManufacturer           1
 iProduct                2 USB Reader
 iSerial                 3 2004888
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           32
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0x80
     (Bus Powered)
   MaxPower              100mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           2
     bInterfaceClass         8 Mass Storage
     bInterfaceSubClass      6 SCSI
     bInterfaceProtocol     80 Bulk (Zip)
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x01  EP 1 OUT
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0040  1x 64 bytes
       bInterval               0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x82  EP 2 IN
       bmAttributes            2
         Transfer Type            Bulk
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0040  1x 64 bytes
       bInterval               0
Device Status:     0x0000
 (Bus Powered)

Bus 002 Device 002: ID 046d:c03d Logitech, Inc. M-BT69a Pilot Optical Mouse
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            0 (Defined at Interface level)
 bDeviceSubClass         0
 bDeviceProtocol         0
 bMaxPacketSize0         8
 idVendor           0x046d Logitech, Inc.
 idProduct          0xc03d M-BT69a Pilot Optical Mouse
 bcdDevice           20.00
 iManufacturer           1 Logitech
 iProduct                2 USB-PS/2 Optical Mouse
 iSerial                 0
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           34
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xa0
     (Bus Powered)
     Remote Wakeup
   MaxPower               98mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         3 Human Interface Device
     bInterfaceSubClass      1 Boot Interface Subclass
     bInterfaceProtocol      2 Mouse
     iInterface              0
       HID Device Descriptor:
         bLength                 9
         bDescriptorType        33
         bcdHID               1.10
         bCountryCode            0 Not supported
         bNumDescriptors         1
         bDescriptorType        34 Report
         wDescriptorLength      50
        Report Descriptors:
          ** UNAVAILABLE **
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0004  1x 4 bytes
       bInterval              10
Device Status:     0x0000
 (Bus Powered)

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               1.10
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         0 Full speed (or root) hub
 bMaxPacketSize0        64
 idVendor           0x1d6b Linux Foundation
 idProduct          0x0001 1.1 root hub
 bcdDevice            2.06
 iManufacturer           3 Linux 2.6.28-11-generic ohci_hcd
 iProduct                2 OHCI Host Controller
 iSerial                 1 0000:00:13.0
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           25
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xe0
     Self Powered
     Remote Wakeup
   MaxPower                0mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         9 Hub
     bInterfaceSubClass      0 Unused
     bInterfaceProtocol      0 Full speed (or root) hub
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0002  1x 2 bytes
       bInterval             255
Hub Descriptor:
 bLength               9
 bDescriptorType      41
 nNbrPorts             4
 wHubCharacteristic 0x0002
   No power switching (usb 1.0)
   Ganged overcurrent protection
 bPwrOn2PwrGood        2 * 2 milli seconds
 bHubContrCurrent      0 milli Ampere
 DeviceRemovable    0x00
 PortPwrCtrlMask    0xff
Hub Port Status:
  Port 1: 0000.0303 lowspeed power enable connect
  Port 2: 0000.0100 power
  Port 3: 0000.0103 power enable connect
  Port 4: 0000.0100 power
Device Status:     0x0003
 Self Powered
Remote Wakeup Enabled
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux