On Mon, Feb 10, 2020 at 04:28:08PM +0100, Eugeniu Rosca wrote: > Hi Alan, hi Greg, > > On Thu, Feb 06, 2020 at 12:49:23PM +0100, Hardik Gajjar wrote: > > Renesas R-Car H3ULCB + Kingfisher Infotainment Board is either not able > > to detect the USB3.0 mass storage devices or is detecting those as > > USB2.0 high speed devices. > > > > The explanation given by Renesas is that, due to a HW issue, the XHCI > > driver does not wake up after going to sleep on connecting a USB3.0 > > device. > > > > In order to mitigate that, disable the auto-suspend feature > > specifically for SMSC hubs from hub_probe() function, as a quirk. > > > > Renesas Kingfisher Infotainment Board has two USB3.0 ports (CN2) which > > are connected via USB5534B 4-port SuperSpeed/Hi-Speed, low-power, > > configurable hub controller. > > > > [1] SanDisk USB 3.0 device detected as USB-2.0 before the patch > > [ 74.036390] usb 5-1.1: new high-speed USB device number 4 using xhci-hcd > > [ 74.061598] usb 5-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 > > [ 74.069976] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > > [ 74.077303] usb 5-1.1: Product: Ultra > > [ 74.080980] usb 5-1.1: Manufacturer: SanDisk > > [ 74.085263] usb 5-1.1: SerialNumber: 4C530001110208116550 > > > > [2] SanDisk USB 3.0 device detected as USB-3.0 after the patch > > [ 34.565078] usb 6-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd > > [ 34.588719] usb 6-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 > > [ 34.597098] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > > [ 34.604430] usb 6-1.1: Product: Ultra > > [ 34.608110] usb 6-1.1: Manufacturer: SanDisk > > [ 34.612397] usb 6-1.1: SerialNumber: 4C530001110208116550 > > > > Suggested-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> > > Signed-off-by: Hardik Gajjar <hgajjar@xxxxxxxxxxxxxx> > > Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> > > Tested-by: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx> > > Is there anything else we can do to see the patch accepted? > Do you think it is also relevant for the stable tree? It was the merge window, I couldn't do anything with it until a few hours ago. Please give me some time to catch up with patches... thanks, greg k-h
