This patch adds the ability to receive a notification from the DRD code for
role-switch events in doing so it introduces a disjunction between
gpio-usb-conn or extcon mode.
This is what we want to do, since the two methods are mutually exclusive.
Cc: Andy Gross <agross@xxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Lee Jones <lee.jones@xxxxxxxxxx>
Cc: Felipe Balbi <balbi@xxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Cc: Jack Pham <jackp@xxxxxxxxxxxxxx>
Cc: linux-arm-msm@xxxxxxxxxxxxxxx
Cc: linux-usb@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
drivers/usb/dwc3/dwc3-qcom.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index fc66ca3316ef..48e43dbc88cf 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -571,6 +571,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct dwc3_qcom *qcom;
struct resource *res, *parent_res = NULL;
+ struct dwc3 *dwc;
int ret, i;
bool ignore_pipe_clk;
@@ -669,8 +670,16 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
if (qcom->mode == USB_DR_MODE_PERIPHERAL)
dwc3_qcom_vbus_overrride_enable(qcom, true);
- /* register extcon to override sw_vbus on Vbus change later */
- ret = dwc3_qcom_register_extcon(qcom);
+ if (dwc3_qcom_find_gpio_usb_connector(qcom->dwc3)) {
+ /* Using gpio-usb-conn register a notifier for VBUS */
+ dwc = platform_get_drvdata(qcom->dwc3);
+ qcom->vbus_nb.notifier_call = dwc3_qcom_vbus_notifier;
+ ret = dwc3_role_switch_notifier_register(dwc, &qcom->vbus_nb);
+ } else {
+ /* register extcon to override sw_vbus on Vbus change later */
+ ret = dwc3_qcom_register_extcon(qcom);
+ }
+
if (ret)
goto depopulate;
@@ -702,8 +711,11 @@ static int dwc3_qcom_remove(struct platform_device *pdev)
{
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
struct device *dev = &pdev->dev;
+ struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
int i;
+ dwc3_role_switch_notifier_unregister(dwc, &qcom->vbus_nb);
+
of_platform_depopulate(dev);
for (i = qcom->num_clocks - 1; i >= 0; i--) {
--
2.25.0
