dwc2 always reports as self-powered in response to a device status request. Implement the set_selfpowered() operations so that the gadget can report as bus-powered when appropriate. This is modelled on the dwc3 implementation. Signed-off-by: John Keeping <john@xxxxxxxxxxxx> --- drivers/usb/dwc2/gadget.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 2717f4401b97..76c0a5242175 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -1646,7 +1646,8 @@ static int dwc2_hsotg_process_req_status(struct dwc2_hsotg *hsotg, switch (ctrl->bRequestType & USB_RECIP_MASK) { case USB_RECIP_DEVICE: - status = 1 << USB_DEVICE_SELF_POWERED; + status = hsotg->gadget.is_selfpowered << + USB_DEVICE_SELF_POWERED; status |= hsotg->remote_wakeup_allowed << USB_DEVICE_REMOTE_WAKEUP; reply = cpu_to_le16(status); @@ -4530,6 +4531,26 @@ static int dwc2_hsotg_gadget_getframe(struct usb_gadget *gadget) return dwc2_hsotg_read_frameno(to_hsotg(gadget)); } +/** + * dwc2_hsotg_set_selfpowered - set if device is self/bus powered + * @gadget: The usb gadget state + * @is_selfpowered: Whether the device is self-powered + * + * Set if the device is self or bus powered. + */ +static int dwc2_hsotg_set_selfpowered(struct usb_gadget *gadget, + int is_selfpowered) +{ + struct dwc2_hsotg *hsotg = to_hsotg(gadget); + unsigned long flags; + + spin_lock_irqsave(&hsotg->lock, flags); + gadget->is_selfpowered = !!is_selfpowered; + spin_unlock_irqrestore(&hsotg->lock, flags); + + return 0; +} + /** * dwc2_hsotg_pullup - connect/disconnect the USB PHY * @gadget: The usb gadget state @@ -4621,6 +4642,7 @@ static int dwc2_hsotg_vbus_draw(struct usb_gadget *gadget, unsigned int mA) static const struct usb_gadget_ops dwc2_hsotg_gadget_ops = { .get_frame = dwc2_hsotg_gadget_getframe, + .set_selfpowered = dwc2_hsotg_set_selfpowered, .udc_start = dwc2_hsotg_udc_start, .udc_stop = dwc2_hsotg_udc_stop, .pullup = dwc2_hsotg_pullup, -- 2.25.0