Different configuration/condition may draw different power. Inform the
controller driver of the change so it can respond properly (e.g.
GET_STATUS request). This fixes an issue with setting MaxPower from
configfs. The composite driver doesn't check this value when setting
self-powered.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 88af8bbe4ef7 ("usb: gadget: the start of the configfs interface")
Signed-off-by: Thinh Nguyen <thinhn@xxxxxxxxxxxx>
---
Changes in v2:
- Add Cc to stable
- Set/clear self-powered for suspend and resume also
drivers/usb/gadget/composite.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 223f72d4d9ed..cb4950cf1cdc 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -861,6 +861,11 @@ static int set_config(struct usb_composite_dev *cdev,
else
power = min(power, 900U);
done:
+ if (power <= USB_SELF_POWER_VBUS_MAX_DRAW)
+ usb_gadget_set_selfpowered(gadget);
+ else
+ usb_gadget_clear_selfpowered(gadget);
+
usb_gadget_vbus_draw(gadget, power);
if (result >= 0 && cdev->delayed_status)
result = USB_GADGET_DELAYED_STATUS;
@@ -2279,6 +2284,7 @@ void composite_suspend(struct usb_gadget *gadget)
cdev->suspended = 1;
+ usb_gadget_set_selfpowered(gadget);
usb_gadget_vbus_draw(gadget, 2);
}
@@ -2307,6 +2313,9 @@ void composite_resume(struct usb_gadget *gadget)
else
maxpower = min(maxpower, 900U);
+ if (maxpower > USB_SELF_POWER_VBUS_MAX_DRAW)
+ usb_gadget_clear_selfpowered(gadget);
+
usb_gadget_vbus_draw(gadget, maxpower);
}
--
2.11.0
