Fix the runtime resume doesn't work normally for linking change. 1. Reset the settings and status of runtime suspend. 2. Sync the linking status. 3. Poll the linking change. Signed-off-by: Hayes Wang <hayeswang@xxxxxxxxxxx> --- drivers/net/usb/r8152.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 031cb8fff909..115559707683 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -365,8 +365,10 @@ #define DEBUG_LTSSM 0x0082 /* PLA_EXTRA_STATUS */ +#define CUR_LINK_OK BIT(15) #define U3P3_CHECK_EN BIT(7) /* RTL_VER_05 only */ #define LINK_CHANGE_FLAG BIT(8) +#define POLL_LINK_CHG BIT(0) /* USB_USB2PHY */ #define USB2PHY_SUSPEND 0x0001 @@ -5387,6 +5389,16 @@ static void r8153_init(struct r8152 *tp) else ocp_data |= DYNAMIC_BURST; ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1, ocp_data); + + r8153_queue_wake(tp, false); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS); + if (rtl8152_get_speed(tp) & LINK_STATUS) + ocp_data |= CUR_LINK_OK; + else + ocp_data &= ~CUR_LINK_OK; + ocp_data |= POLL_LINK_CHG; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data); } ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY2); @@ -5416,6 +5428,7 @@ static void r8153_init(struct r8152 *tp) ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001); r8153_power_cut_en(tp, false); + rtl_runtime_suspend_enable(tp, false); r8153_u1u2en(tp, true); r8153_mac_clk_spd(tp, false); usb_enable_lpm(tp->udev); @@ -5484,6 +5497,14 @@ static void r8153b_init(struct r8152 *tp) r8153b_ups_en(tp, false); r8153_queue_wake(tp, false); rtl_runtime_suspend_enable(tp, false); + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS); + if (rtl8152_get_speed(tp) & LINK_STATUS) + ocp_data |= CUR_LINK_OK; + else + ocp_data &= ~CUR_LINK_OK; + ocp_data |= POLL_LINK_CHG; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data); r8153b_u1u2en(tp, true); usb_enable_lpm(tp->udev); -- 2.21.0
