When high load on the DWC3 SuperSpee port, the controller crashed as: [ 221.141621] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. [ 221.157631] xhci-hcd xhci-hcd.0.auto: Host halt failed, -110 [ 221.157635] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead [ 221.159901] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. [ 221.159961] hub 2-1.1:1.0: hub_ext_port_status failed (err = -22) [ 221.160076] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up [ 221.165946] usb 2-1.1-port1: cannot reset (err = -22) Setting the parkmode_disable_ss_quirk quirk fixes the issue. CC: Dongjin Kim <tobetter@xxxxxxxxx> Cc: Jianxin Pan <jianxin.pan@xxxxxxxxxxx> Reported-by: Tim <elatllat@xxxxxxxxx> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> --- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 3f39e020f74e..4b002e799e5c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -2381,6 +2381,7 @@ dr_mode = "host"; snps,dis_u2_susphy_quirk; snps,quirk-frame-length-adjustment; + snps,parkmode-disable-ss-quirk; }; }; -- 2.22.0
