VBUS regulator should be turned off in a case of error.
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
drivers/usb/phy/phy-tegra-usb.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index c431968d0433..90b42e963a1e 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -864,20 +864,20 @@ static int tegra_usb_phy_init(struct usb_phy *u_phy)
dev_err(phy->u_phy.dev, "Invalid pll_u parent rate %ld\n",
parent_rate);
err = -EINVAL;
- goto fail;
+ goto disable_clk;
}
err = regulator_enable(phy->vbus);
if (err) {
dev_err(phy->u_phy.dev,
"Failed to enable USB VBUS regulator: %d\n", err);
- goto fail;
+ goto disable_clk;
}
if (!phy->is_ulpi_phy) {
err = utmip_pad_open(phy);
if (err)
- goto fail;
+ goto disable_vbus;
}
err = tegra_usb_phy_power_on(phy);
@@ -889,7 +889,11 @@ static int tegra_usb_phy_init(struct usb_phy *u_phy)
close_phy:
if (!phy->is_ulpi_phy)
utmip_pad_close(phy);
-fail:
+
+disable_vbus:
+ regulator_disable(phy->vbus);
+
+disable_clk:
clk_disable_unprepare(phy->pll_u);
phy->freq = NULL;
--
2.24.0
