Realtek Hub (0bda:0x0487) used in Dell Dock WD19 sometimes drops off the
bus when bringing underlying ports from U3 to U0.
After some expirements and guessworks, the hub itself needs to be U0
during setting its port's link state back to U0.
So add a new quirk to let the hub disables LPM on setting U0 for its
downstream facing ports.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
---
drivers/usb/core/hub.c | 12 ++++++++++--
drivers/usb/core/quirks.c | 7 +++++++
include/linux/usb/quirks.h | 3 +++
3 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index f229ad6952c0..35a035781c5a 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3533,9 +3533,17 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
}
/* see 7.1.7.7; affects power usage, but not budgeting */
- if (hub_is_superspeed(hub->hdev))
+ if (hub_is_superspeed(hub->hdev)) {
+ if (hub->hdev->quirks & USB_QUIRK_DISABLE_LPM_ON_U0) {
+ usb_lock_device(hub->hdev);
+ usb_unlocked_disable_lpm(hub->hdev);
+ }
status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U0);
- else
+ if (hub->hdev->quirks & USB_QUIRK_DISABLE_LPM_ON_U0) {
+ usb_unlocked_enable_lpm(hub->hdev);
+ usb_unlock_device(hub->hdev);
+ }
+ } else
status = usb_clear_port_feature(hub->hdev,
port1, USB_PORT_FEAT_SUSPEND);
if (status) {
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 6b6413073584..69474d0d2b38 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -131,6 +131,9 @@ static int quirks_param_set(const char *val, const struct kernel_param *kp)
case 'o':
flags |= USB_QUIRK_HUB_SLOW_RESET;
break;
+ case 'p':
+ flags |= USB_QUIRK_DISABLE_LPM_ON_U0;
+ break;
/* Ignore unrecognized flag characters */
}
}
@@ -371,6 +374,10 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+ /* Realtek hub in Dell WD19 (Type-C) */
+ { USB_DEVICE(0x0bda, 0x0487), .driver_info =
+ USB_QUIRK_DISABLE_LPM_ON_U0 },
+
/* Action Semiconductor flash disk */
{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index a1be64c9940f..1881d650f84c 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -69,4 +69,7 @@
/* Hub needs extra delay after resetting its port. */
#define USB_QUIRK_HUB_SLOW_RESET BIT(14)
+/* LPM on hub needs to be disabled during setting port link state. */
+#define USB_QUIRK_DISABLE_LPM_ON_U0 BIT(15)
+
#endif /* __LINUX_USB_QUIRKS_H */
--
2.17.1
