Originally the port drivers were expected to check does the connector have the mode enabled or disabled when the alt mode drivers attempted to enter the mode, but since typec_altmode_enter() puts the connector into USB Safe State before calling the port driver, it really has to do the check on its own, and before changing the state. Otherwise the connector may be left in USB Safe State if the port driver does not move it back to normal USB operation when the mode is disabled. Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx> --- drivers/usb/typec/bus.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/typec/bus.c b/drivers/usb/typec/bus.c index 74cb3c2ecb34..4116379fbd68 100644 --- a/drivers/usb/typec/bus.c +++ b/drivers/usb/typec/bus.c @@ -101,6 +101,9 @@ int typec_altmode_enter(struct typec_altmode *adev) if (!pdev->ops || !pdev->ops->enter) return -EOPNOTSUPP; + if (is_typec_port(pdev->dev.parent) && !pdev->active) + return -EPERM; + /* Moving to USB Safe State */ ret = typec_altmode_set_state(adev, TYPEC_STATE_SAFE); if (ret) -- 2.24.1
