It is much more intuitive if reset is treated as asserted when GPIO value is set to 1. All NVIDIA Tegra device-trees are properly specifying active state of the reset-GPIO since 2013, let's clean up that part of the code. Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx> --- drivers/usb/phy/phy-tegra-usb.c | 58 ++++++++----------------------- include/linux/usb/tegra_usb_phy.h | 3 +- 2 files changed, 17 insertions(+), 44 deletions(-) diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c index 1ecd9f7900af..cc6cca4dcecb 100644 --- a/drivers/usb/phy/phy-tegra-usb.c +++ b/drivers/usb/phy/phy-tegra-usb.c @@ -306,14 +306,7 @@ static int utmip_pad_close(struct tegra_usb_phy *phy) static void ulpi_close(struct tegra_usb_phy *phy) { - int err; - - err = gpio_direction_output(phy->reset_gpio, 0); - if (err) { - dev_err(phy->u_phy.dev, - "ULPI reset GPIO %d direction not asserted: %d\n", - phy->reset_gpio, err); - } + gpiod_set_value_cansleep(phy->reset_gpio, 1); } static int utmip_pad_power_on(struct tegra_usb_phy *phy) @@ -703,12 +696,7 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy) u32 val; int err; - err = gpio_direction_output(phy->reset_gpio, 0); - if (err) { - dev_err(phy->u_phy.dev, "GPIO %d not set to 0: %d\n", - phy->reset_gpio, err); - return err; - } + gpiod_set_value_cansleep(phy->reset_gpio, 1); err = clk_prepare_enable(phy->clk); if (err) @@ -716,12 +704,7 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy) usleep_range(5000, 10000); - err = gpio_direction_output(phy->reset_gpio, 1); - if (err) { - dev_err(phy->u_phy.dev, "GPIO %d not set to 1: %d\n", - phy->reset_gpio, err); - goto disable_clk; - } + gpiod_set_value_cansleep(phy->reset_gpio, 0); usleep_range(1000, 2000); @@ -784,8 +767,9 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy) static int ulpi_phy_power_off(struct tegra_usb_phy *phy) { clk_disable_unprepare(phy->clk); + gpiod_set_value_cansleep(phy->reset_gpio, 1); - return gpio_direction_output(phy->reset_gpio, 0); + return 0; } static void tegra_usb_phy_shutdown(struct usb_phy *u_phy) @@ -837,15 +821,7 @@ static int tegra_usb_phy_set_suspend(struct usb_phy *u_phy, int suspend) static int ulpi_open(struct tegra_usb_phy *phy) { - int err; - - err = gpio_direction_output(phy->reset_gpio, 0); - if (err) { - dev_err(phy->u_phy.dev, - "ULPI reset GPIO %d direction not deasserted: %d\n", - phy->reset_gpio, err); - return err; - } + gpiod_set_value_cansleep(phy->reset_gpio, 1); return 0; } @@ -1081,6 +1057,7 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) struct tegra_usb_phy *tegra_phy; enum usb_phy_interface phy_type; struct reset_control *reset; + struct gpio_desc *gpiod; struct resource *res; struct usb_phy *phy; int err; @@ -1158,15 +1135,6 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) case USBPHY_INTERFACE_MODE_ULPI: tegra_phy->is_ulpi_phy = true; - tegra_phy->reset_gpio = - of_get_named_gpio(np, "nvidia,phy-reset-gpio", 0); - - if (!gpio_is_valid(tegra_phy->reset_gpio)) { - dev_err(&pdev->dev, - "Invalid GPIO: %d\n", tegra_phy->reset_gpio); - return tegra_phy->reset_gpio; - } - tegra_phy->clk = devm_clk_get(&pdev->dev, "ulpi-link"); err = PTR_ERR_OR_ZERO(tegra_phy->clk); if (err) { @@ -1175,13 +1143,17 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) return err; } - err = devm_gpio_request(&pdev->dev, tegra_phy->reset_gpio, - "ulpi_phy_reset_b"); + gpiod = devm_gpiod_get_from_of_node(&pdev->dev, np, + "nvidia,phy-reset-gpio", + 0, GPIOD_OUT_HIGH, + "ulpi_phy_reset_b"); + err = PTR_ERR_OR_ZERO(gpiod); if (err) { - dev_err(&pdev->dev, "Request failed for GPIO %d: %d\n", - tegra_phy->reset_gpio, err); + dev_err(&pdev->dev, + "Request failed for reset GPIO: %d\n", err); return err; } + tegra_phy->reset_gpio = gpiod; phy = devm_otg_ulpi_create(&pdev->dev, &ulpi_viewport_access_ops, 0); diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h index 0c5c3ea8b2d7..6b857fe13b35 100644 --- a/include/linux/usb/tegra_usb_phy.h +++ b/include/linux/usb/tegra_usb_phy.h @@ -17,6 +17,7 @@ #define __TEGRA_USB_PHY_H #include <linux/clk.h> +#include <linux/gpio.h> #include <linux/reset.h> #include <linux/usb/otg.h> @@ -76,7 +77,7 @@ struct tegra_usb_phy { struct usb_phy u_phy; bool is_legacy_phy; bool is_ulpi_phy; - int reset_gpio; + struct gpio_desc *reset_gpio; struct reset_control *pad_rst; }; -- 2.24.0