Re: [Patch V2 04/18] phy: tegra: xusb: Add usb-phy support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 19-12-2019 19:07, Thierry Reding wrote:
On Wed, Dec 18, 2019 at 02:46:17PM +0530, Nagarjuna Kristam wrote:
For USB 2 ports that has usb-role-switch enabled, add usb-phy for
corresponding USB 2 phy. USB role changes from role switch are then
updated to corresponding host and device mode drivers via usb-phy notifier
block.

Signed-off-by: Nagarjuna Kristam<nkristam@xxxxxxxxxx>
---
V2:
  - Added dev_set_drvdata for port->dev.
---
  drivers/phy/tegra/xusb.c | 71 ++++++++++++++++++++++++++++++++++++++++++++++++
  drivers/phy/tegra/xusb.h |  2 ++
  2 files changed, 73 insertions(+)

diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index dc00b42..5bde8f1 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -533,6 +533,8 @@ static int tegra_xusb_port_init(struct tegra_xusb_port *port,
  	if (err < 0)
  		goto unregister;
+ dev_set_drvdata(&port->dev, port);
+
  	return 0;
unregister:
@@ -545,6 +547,8 @@ static void tegra_xusb_port_unregister(struct tegra_xusb_port *port)
  	if (!IS_ERR_OR_NULL(port->usb_role_sw)) {
  		of_platform_depopulate(&port->dev);
  		usb_role_switch_unregister(port->usb_role_sw);
+		cancel_work_sync(&port->usb_phy_work);
+		usb_remove_phy(&port->usb_phy);
  	}
  	device_unregister(&port->dev);
  }
@@ -556,16 +560,59 @@ static const char *const modes[] = {
  	[USB_DR_MODE_OTG] = "otg",
  };
+static void tegra_xusb_usb_phy_work(struct work_struct *work)
+{
+	struct tegra_xusb_port *port = container_of(work,
+				struct tegra_xusb_port, usb_phy_work);
Perhaps add a static inline function to cast this? Might not be worth it
since we only need to cast once. In that case, perhaps make this look a
little prettier by aligning arguments on subsequent lines with "work" on
the first line?

Will align arguments with "work".

+	enum usb_role role = usb_role_switch_get_role(port->usb_role_sw);
+
+	dev_dbg(&port->dev, "%s calling notifier for role %d\n", __func__,
+		role);
+
+	atomic_notifier_call_chain(&port->usb_phy.notifier, role,
+				   &port->usb_phy);
I'm curious: you use an atomic notifier call chain here but then you
schedule work to call it. Typically you only need to schedule work if
you get notified in atomic context and you need to process the event
outside of the atomic context.

Since these are atomic notifiers, do we really need the work? Or the
other way around: why not use regular notifiers if we're processing them
from non-atomic contexts only anyway?

notifier used by usb-phy are atomic notifiers and hence need to call
atomic_notifier_call_chain only in this context., regular notifiers
cannot be used.

+}
+
  static int tegra_xusb_role_sw_set(struct device *dev, enum usb_role role)
  {
+	struct tegra_xusb_port *port = dev_get_drvdata(dev);
+
  	dev_dbg(dev, "%s calling notifier for role is %d\n", __func__, role);
+ schedule_work(&port->usb_phy_work);
+
+	return 0;
+}
+
+static int tegra_xusb_set_peripheral(struct usb_otg *otg,
+					struct usb_gadget *gadget)
+{
+	struct tegra_xusb_port *port = container_of(otg->usb_phy,
+					struct tegra_xusb_port, usb_phy);
+
+	if (gadget != NULL)
+		schedule_work(&port->usb_phy_work);
+
+	return 0;
+}
+
+static int tegra_xusb_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	struct tegra_xusb_port *port = container_of(otg->usb_phy,
+					struct tegra_xusb_port, usb_phy);
+
+	if (host != NULL)
+		schedule_work(&port->usb_phy_work);
+
  	return 0;
  }
+
  static int tegra_xusb_setup_usb_role_switch(struct tegra_xusb_port *port)
  {
  	int err = 0;
+	struct tegra_xusb_lane *lane = tegra_xusb_find_lane(port->padctl,
+							"usb2", port->index);
You're not properly aligning the arguments here.

Thierry

Will align here and other places accordingly.

-Nagarjuna
  	struct usb_role_switch_desc role_sx_desc = {
  					.set = tegra_xusb_role_sw_set,
  					.fwnode = dev_fwnode(&port->dev),
@@ -578,6 +625,30 @@ static int tegra_xusb_setup_usb_role_switch(struct tegra_xusb_port *port)
  		if (err != EPROBE_DEFER)
  			dev_err(&port->dev, "Failed to register USB role SW: %d",
  				err);
+		return err;
+	}
+
+	INIT_WORK(&port->usb_phy_work, tegra_xusb_usb_phy_work);
+
+	port->usb_phy.otg = devm_kzalloc(&port->dev,
+					 sizeof(struct usb_otg), GFP_KERNEL);
+	if (!port->usb_phy.otg)
+		return -ENOMEM;
+
+	/*
+	 * Assign phy dev to usb-phy dev. Host/device drivers can use phy
+	 * reference to retrieve usb-phy details.
+	 */
+	port->usb_phy.dev = &lane->pad->lanes[port->index]->dev;
+	port->usb_phy.dev->driver = port->padctl->dev->driver;
+	port->usb_phy.otg->usb_phy = &port->usb_phy;
+	port->usb_phy.otg->set_peripheral = tegra_xusb_set_peripheral;
+	port->usb_phy.otg->set_host = tegra_xusb_set_host;
+
+	err = usb_add_phy_dev(&port->usb_phy);
+	if (err < 0) {
+		dev_err(&port->dev, "Failed to add usbphy: %d\n", err);
+		return err;
  	}
/* populate connector entry */
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index 9f27899..2345657 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -268,6 +268,8 @@ struct tegra_xusb_port {
  	struct device dev;
struct usb_role_switch *usb_role_sw;
+	struct work_struct usb_phy_work;
+	struct usb_phy usb_phy;
const struct tegra_xusb_port_ops *ops;
  };
--
2.7.4



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux