While the END_TRANSFER command is sent but not completed, any request
dequeue during this time will cause the driver to issue the END_TRANSFER
command. The driver needs to submit the command only once to stop the
controller from processing further. The controller may take more time to
process the same command multiple times unnecessarily. Let's add a flag
DWC3_EP_END_TRANSFER_PENDING to check for this condition.
Fixes: 3aec99154db3 ("usb: dwc3: gadget: remove DWC3_EP_END_TRANSFER_PENDING")
Signed-off-by: Thinh Nguyen <thinhn@xxxxxxxxxxxx>
---
Changes in v2:
- None
drivers/usb/dwc3/core.h | 1 +
drivers/usb/dwc3/ep0.c | 4 +++-
drivers/usb/dwc3/gadget.c | 6 +++++-
3 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 1c8b349379af..da0af11fbc1a 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -688,6 +688,7 @@ struct dwc3_ep {
#define DWC3_EP_STALL BIT(1)
#define DWC3_EP_WEDGE BIT(2)
#define DWC3_EP_TRANSFER_STARTED BIT(3)
+#define DWC3_EP_END_TRANSFER_PENDING BIT(4)
#define DWC3_EP_PENDING_REQUEST BIT(5)
/* This last one is specific to EP0 */
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index fd1b100d2927..6dee4dabc0a4 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -1136,8 +1136,10 @@ void dwc3_ep0_interrupt(struct dwc3 *dwc,
case DWC3_DEPEVT_EPCMDCMPLT:
cmd = DEPEVT_PARAMETER_CMD(event->parameters);
- if (cmd == DWC3_DEPCMD_ENDTRANSFER)
+ if (cmd == DWC3_DEPCMD_ENDTRANSFER) {
+ dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
+ }
break;
}
}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index b3f8514d1f27..218022c261bc 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2621,6 +2621,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
cmd = DEPEVT_PARAMETER_CMD(event->parameters);
if (cmd == DWC3_DEPCMD_ENDTRANSFER) {
+ dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
dwc3_gadget_ep_cleanup_cancelled_requests(dep);
}
@@ -2679,7 +2680,8 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
u32 cmd;
int ret;
- if (!(dep->flags & DWC3_EP_TRANSFER_STARTED))
+ if (!(dep->flags & DWC3_EP_TRANSFER_STARTED) ||
+ (dep->flags & DWC3_EP_END_TRANSFER_PENDING))
return;
/*
@@ -2724,6 +2726,8 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
if (!interrupt)
dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
+ else
+ dep->flags |= DWC3_EP_END_TRANSFER_PENDING;
if (dwc3_is_usb31(dwc) || dwc->revision < DWC3_REVISION_310A)
udelay(100);
--
2.11.0
