Hi Peter,
Le mar., déc. 17, 2019 at 01:32, Peter Chen <peter.chen@xxxxxxx> a
écrit :
Le lun., déc. 16, 2019 at 01:24, Peter Chen <peter.chen@xxxxxxx> a
écrit :
>
>> >> +
>> >> + desc = &charger->desc;
>> >> + desc->name = "usb-charger";
>> >> + desc->properties = usb_charger_properties;
>> >> + desc->num_properties = ARRAY_SIZE(usb_charger_properties);
>> >> + desc->get_property = usb_charger_get_property;
>> >> + desc->type = POWER_SUPPLY_TYPE_USB;
>> >
>> > What's your further plan for this generic USB charger?
>> > To support BC1.2, we need to know charger type, and how we
could
>> get > it?
>> >
>> > Peter
>>
>> Well I don't really know. The USB role framework does not give
any
>> info about what's plugged.
>>
>
> What's the use case for this patch set? How it be used?
My devicetree:
usb_otg: usb@13440000 {
compatible = "ingenic,jz4770-musb", "simple-mfd";
reg = <0x13440000 0x10000>;
[...]
usb-role-switch;
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
label = "mini-USB";
type = "mini";
id-gpios = <&gpf 18 GPIO_ACTIVE_HIGH>;
vbus-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
[...]
};
usb_charger: usb-charger {
compatible = "usb-charger";
};
};
The new gpio-usb-connector driver uses the ID/VBUS GPIOs to detect
in
which state (device, host, unconnected) a OTG connector is. However,
that means I cannot use the standard gpio-charger driver to detect
the
presence of a charger based on the state of the VBUS gpio, since
it's
already requested here. So the point of this patchset is to provide
an
alternative to gpio-charger that works with OTG controllers
compatible
with 'usb-role-switch'.
Thanks for explaining it.
What's the user for this USB charger, PMIC or what else? How the
user uses
this USB charger interface?
It's exported as a standard charger, so it can be passed to client
drivers through devicetree, and its online status can be retrieved from
sysfs.
-Paul
>> >
>> >> +
>> >> + charger->charger = devm_power_supply_register(dev, desc,
>> &cfg);
>> >> + if (IS_ERR(charger->charger)) {
>> >> + dev_err(dev, "Unable to register charger");
>> >> + return PTR_ERR(charger->charger);
>> >> + }
>> >> +
>> >> + err = usb_role_switch_register_notifier(charger->role,
>> >> &charger->nb);
>> >> + if (err) {
>> >> + dev_err(dev, "Unable to register USB role switch
notifier");
>> >> + return err;
>> >> + }
>> >> +
>> >> + return devm_add_action_or_reset(dev,
usb_charger_unregister,
>> >> charger);
>> >> +}
>> >> +
>> >> +static const struct of_device_id usb_charger_of_match[] = {
>> >> + { .compatible = "usb-charger" },
>> >> + { /* sentinel */ },
>> >> +};
>> >> +MODULE_DEVICE_TABLE(of, usb_charger_of_match); + +static
>> struct
>> >> platform_driver usb_charger_driver = {
>> >> + .driver = {
>> >> + .name = "usb-charger",
>> >> + .of_match_table = of_match_ptr(usb_charger_of_match),
>> >> + },
>> >> + .probe = usb_charger_probe,
>> >> +};
>> >> +module_platform_driver(usb_charger_driver);
>> >> +
>> >> +MODULE_DESCRIPTION("Simple USB charger driver");
>> >> +MODULE_AUTHOR("Paul Cercueil <paul@xxxxxxxxxxxxxxx>");
>> >> +MODULE_LICENSE("GPL");
>> >> --
>> >> 2.24.0
>> >>
>> >
>> > --
>> >
>> > Thanks,
>> > Peter Chen
>>
>
