On Tue, Dec 17, 2019 at 1:21 PM Dmitry Vyukov <dvyukov@xxxxxxxxxx> wrote:
>
> On Thu, Dec 12, 2019 at 6:15 PM Andrey Konovalov
> <andreyknvl@xxxxxxxxxx> wrote:
> >
> > This change extends kcov remote coverage support to allow collecting
> > coverage from interrupts in addition to kernel background threads.
> >
> > To collect coverage from code that is executed in interrupt context, a
> > part of that code has to be annotated with kcov_remote_start/stop() in a
> > similar way as how it is done for global kernel background threads. Then
> > the handle used for the annotations has to be passed to the
> > KCOV_REMOTE_ENABLE ioctl.
> >
> > Internally this patch adjusts the __sanitizer_cov_trace_pc() compiler
> > inserted callback to not bail out when called from interrupt context.
> > kcov_remote_start/stop() are updated to save/restore the current per
> > task kcov state in a per-cpu area (in case the interrupt came when the
> > kernel was already collecting coverage in task context). Coverage from
> > interrupts is collected into pre-allocated per-cpu areas, whose size is
> > controlled by the new CONFIG_KCOV_IRQ_AREA_SIZE.
> >
> > This patch also cleans up some of kcov debug messages.
> >
> > Signed-off-by: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
> > ---
> > Documentation/dev-tools/kcov.rst | 16 +--
> > drivers/usb/gadget/udc/dummy_hcd.c | 1 +
> > include/linux/sched.h | 3 +
> > kernel/kcov.c | 196 +++++++++++++++++++----------
> > lib/Kconfig.debug | 9 ++
> > 5 files changed, 154 insertions(+), 71 deletions(-)
> >
> > diff --git a/Documentation/dev-tools/kcov.rst b/Documentation/dev-tools/kcov.rst
> > index 1c4e1825d769..fc2bc6883431 100644
> > --- a/Documentation/dev-tools/kcov.rst
> > +++ b/Documentation/dev-tools/kcov.rst
> > @@ -217,14 +217,14 @@ This allows to collect coverage from two types of kernel background
> > threads: the global ones, that are spawned during kernel boot in a limited
> > number of instances (e.g. one USB hub_event() worker thread is spawned per
> > USB HCD); and the local ones, that are spawned when a user interacts with
> > -some kernel interface (e.g. vhost workers).
> > +some kernel interface (e.g. vhost workers); as well as from interrupts.
> >
> > -To enable collecting coverage from a global background thread, a unique
> > -global handle must be assigned and passed to the corresponding
> > -kcov_remote_start() call. Then a userspace process can pass a list of such
> > -handles to the KCOV_REMOTE_ENABLE ioctl in the handles array field of the
> > -kcov_remote_arg struct. This will attach the used kcov device to the code
> > -sections, that are referenced by those handles.
> > +To enable collecting coverage from a global background thread or from an
> > +interrupt, a unique global handle must be assigned and passed to the
> > +corresponding kcov_remote_start() call. Then a userspace process can pass
> > +a list of such handles to the KCOV_REMOTE_ENABLE ioctl in the handles
> > +array field of the kcov_remote_arg struct. This will attach the used kcov
> > +device to the code sections, that are referenced by those handles.
> >
> > Since there might be many local background threads spawned from different
> > userspace processes, we can't use a single global handle per annotation.
> > @@ -242,7 +242,7 @@ handles as they don't belong to a particular subsystem. The bytes 4-7 are
> > currently reserved and must be zero. In the future the number of bytes
> > used for the subsystem or handle ids might be increased.
> >
> > -When a particular userspace proccess collects coverage by via a common
> > +When a particular userspace proccess collects coverage via a common
> > handle, kcov will collect coverage for each code section that is annotated
> > to use the common handle obtained as kcov_handle from the current
> > task_struct. However non common handles allow to collect coverage
> > diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
> > index 4c9d1e49d5ed..faf84ada71a5 100644
> > --- a/drivers/usb/gadget/udc/dummy_hcd.c
> > +++ b/drivers/usb/gadget/udc/dummy_hcd.c
> > @@ -38,6 +38,7 @@
> > #include <linux/usb/gadget.h>
> > #include <linux/usb/hcd.h>
> > #include <linux/scatterlist.h>
> > +#include <linux/kcov.h>
> >
> > #include <asm/byteorder.h>
> > #include <linux/io.h>
> > diff --git a/include/linux/sched.h b/include/linux/sched.h
> > index 467d26046416..47d1d556f795 100644
> > --- a/include/linux/sched.h
> > +++ b/include/linux/sched.h
> > @@ -1229,6 +1229,9 @@ struct task_struct {
> >
> > /* KCOV sequence number: */
> > int kcov_sequence;
> > +
> > + /* Collect coverage from interrupt context: */
> > + bool kcov_interrupt;
> > #endif
> >
> > #ifdef CONFIG_MEMCG
> > diff --git a/kernel/kcov.c b/kernel/kcov.c
> > index f50354202dbe..5b48a7a5c465 100644
> > --- a/kernel/kcov.c
> > +++ b/kernel/kcov.c
> > @@ -26,6 +26,7 @@
> > #include <asm/setup.h>
> >
> > #define kcov_debug(fmt, ...) pr_debug("%s: " fmt, __func__, ##__VA_ARGS__)
> > +#define kcov_err(fmt, ...) pr_err("%s: " fmt, __func__, ##__VA_ARGS__)
> >
> > /* Number of 64-bit words written per one comparison: */
> > #define KCOV_WORDS_PER_CMP 4
> > @@ -86,6 +87,17 @@ static DEFINE_SPINLOCK(kcov_remote_lock);
> > static DEFINE_HASHTABLE(kcov_remote_map, 4);
> > static struct list_head kcov_remote_areas = LIST_HEAD_INIT(kcov_remote_areas);
> >
> > +struct kcov_remote_irq_data {
> > + unsigned int mode;
> > + unsigned int size;
> > + void *area;
> > + struct kcov *kcov;
> > + unsigned long flags;
> > +};
> > +
> > +DEFINE_PER_CPU(struct kcov_remote_irq_data, kcov_remote_irq);
> > +DEFINE_PER_CPU(void *, kcov_irq_area);
>
> I would combine these 2 vars together.
> Each kcov_remote_irq_data field and kcov_irq_area are all various bits
> of kcov irq-related state. Little point in separating them into 2
> per-cpu variables. What may help is better names, e.g. what's the
> difference between kcov_remote_irq.area and kcov_irq_area?
> I would understand if kcov_remote_irq would only be used in
> kcov_remote_swap_irq as current task save area, but flags already
> don't belong to this category.
>
>
> > +
> > /* Must be called with kcov_remote_lock locked. */
> > static struct kcov_remote *kcov_remote_find(u64 handle)
> > {
> > @@ -98,6 +110,7 @@ static struct kcov_remote *kcov_remote_find(u64 handle)
> > return NULL;
> > }
> >
> > +/* Must be called with kcov_remote_lock locked. */
> > static struct kcov_remote *kcov_remote_add(struct kcov *kcov, u64 handle)
> > {
> > struct kcov_remote *remote;
> > @@ -119,16 +132,13 @@ static struct kcov_remote_area *kcov_remote_area_get(unsigned int size)
> > struct kcov_remote_area *area;
> > struct list_head *pos;
> >
> > - kcov_debug("size = %u\n", size);
> > list_for_each(pos, &kcov_remote_areas) {
> > area = list_entry(pos, struct kcov_remote_area, list);
> > if (area->size == size) {
> > list_del(&area->list);
> > - kcov_debug("rv = %px\n", area);
> > return area;
> > }
> > }
> > - kcov_debug("rv = NULL\n");
> > return NULL;
> > }
> >
> > @@ -136,7 +146,6 @@ static struct kcov_remote_area *kcov_remote_area_get(unsigned int size)
> > static void kcov_remote_area_put(struct kcov_remote_area *area,
> > unsigned int size)
> > {
> > - kcov_debug("area = %px, size = %u\n", area, size);
> > INIT_LIST_HEAD(&area->list);
> > area->size = size;
> > list_add(&area->list, &kcov_remote_areas);
> > @@ -148,9 +157,11 @@ static notrace bool check_kcov_mode(enum kcov_mode needed_mode, struct task_stru
> >
> > /*
> > * We are interested in code coverage as a function of a syscall inputs,
> > - * so we ignore code executed in interrupts.
> > + * so we ignore code executed in interrupts, unless we are in a remote
> > + * coverage collection section happening in an interrupt, which is
> > + * indicated by the t->kcov_interrupt flag.
> > */
> > - if (!in_task())
> > + if (!in_task() && !t->kcov_interrupt)
> > return false;
> > mode = READ_ONCE(t->kcov_mode);
> > /*
> > @@ -331,12 +342,12 @@ static void kcov_stop(struct task_struct *t)
> > barrier();
> > t->kcov_size = 0;
> > t->kcov_area = NULL;
> > + t->kcov = NULL;
> > }
> >
> > static void kcov_task_reset(struct task_struct *t)
> > {
> > kcov_stop(t);
> > - t->kcov = NULL;
> > t->kcov_sequence = 0;
> > t->kcov_handle = 0;
> > }
> > @@ -361,18 +372,18 @@ static void kcov_remote_reset(struct kcov *kcov)
> > int bkt;
> > struct kcov_remote *remote;
> > struct hlist_node *tmp;
> > + unsigned long flags;
> >
> > - spin_lock(&kcov_remote_lock);
> > + spin_lock_irqsave(&kcov_remote_lock, flags);
> > hash_for_each_safe(kcov_remote_map, bkt, tmp, remote, hnode) {
> > if (remote->kcov != kcov)
> > continue;
> > - kcov_debug("removing handle %llx\n", remote->handle);
> > hash_del(&remote->hnode);
> > kfree(remote);
> > }
> > /* Do reset before unlock to prevent races with kcov_remote_start(). */
> > kcov_reset(kcov);
> > - spin_unlock(&kcov_remote_lock);
> > + spin_unlock_irqrestore(&kcov_remote_lock, flags);
> > }
> >
> > static void kcov_disable(struct task_struct *t, struct kcov *kcov)
> > @@ -401,12 +412,13 @@ static void kcov_put(struct kcov *kcov)
> > void kcov_task_exit(struct task_struct *t)
> > {
> > struct kcov *kcov;
> > + unsigned long flags;
> >
> > kcov = t->kcov;
> > if (kcov == NULL)
> > return;
> >
> > - spin_lock(&kcov->lock);
> > + spin_lock_irqsave(&kcov->lock, flags);
> > kcov_debug("t = %px, kcov->t = %px\n", t, kcov->t);
> > /*
> > * For KCOV_ENABLE devices we want to make sure that t->kcov->t == t,
> > @@ -430,12 +442,12 @@ void kcov_task_exit(struct task_struct *t)
> > * By combining all three checks into one we get:
> > */
> > if (WARN_ON(kcov->t != t)) {
> > - spin_unlock(&kcov->lock);
> > + spin_unlock_irqrestore(&kcov->lock, flags);
> > return;
> > }
> > /* Just to not leave dangling references behind. */
> > kcov_disable(t, kcov);
> > - spin_unlock(&kcov->lock);
> > + spin_unlock_irqrestore(&kcov->lock, flags);
> > kcov_put(kcov);
> > }
> >
> > @@ -446,12 +458,13 @@ static int kcov_mmap(struct file *filep, struct vm_area_struct *vma)
> > struct kcov *kcov = vma->vm_file->private_data;
> > unsigned long size, off;
> > struct page *page;
> > + unsigned long flags;
> >
> > area = vmalloc_user(vma->vm_end - vma->vm_start);
> > if (!area)
> > return -ENOMEM;
> >
> > - spin_lock(&kcov->lock);
> > + spin_lock_irqsave(&kcov->lock, flags);
> > size = kcov->size * sizeof(unsigned long);
> > if (kcov->mode != KCOV_MODE_INIT || vma->vm_pgoff != 0 ||
> > vma->vm_end - vma->vm_start != size) {
> > @@ -461,7 +474,7 @@ static int kcov_mmap(struct file *filep, struct vm_area_struct *vma)
> > if (!kcov->area) {
> > kcov->area = area;
> > vma->vm_flags |= VM_DONTEXPAND;
> > - spin_unlock(&kcov->lock);
> > + spin_unlock_irqrestore(&kcov->lock, flags);
> > for (off = 0; off < size; off += PAGE_SIZE) {
> > page = vmalloc_to_page(kcov->area + off);
> > if (vm_insert_page(vma, vma->vm_start + off, page))
> > @@ -470,7 +483,7 @@ static int kcov_mmap(struct file *filep, struct vm_area_struct *vma)
> > return 0;
> > }
> > exit:
> > - spin_unlock(&kcov->lock);
> > + spin_unlock_irqrestore(&kcov->lock, flags);
> > vfree(area);
> > return res;
> > }
> > @@ -550,10 +563,10 @@ static int kcov_ioctl_locked(struct kcov *kcov, unsigned int cmd,
> > int mode, i;
> > struct kcov_remote_arg *remote_arg;
> > struct kcov_remote *remote;
> > + unsigned long flags;
> >
> > switch (cmd) {
> > case KCOV_INIT_TRACE:
> > - kcov_debug("KCOV_INIT_TRACE\n");
> > /*
> > * Enable kcov in trace mode and setup buffer size.
> > * Must happen before anything else.
> > @@ -572,7 +585,6 @@ static int kcov_ioctl_locked(struct kcov *kcov, unsigned int cmd,
> > kcov->mode = KCOV_MODE_INIT;
> > return 0;
> > case KCOV_ENABLE:
> > - kcov_debug("KCOV_ENABLE\n");
> > /*
> > * Enable coverage for the current task.
> > * At this point user must have been enabled trace mode,
> > @@ -598,7 +610,6 @@ static int kcov_ioctl_locked(struct kcov *kcov, unsigned int cmd,
> > kcov_get(kcov);
> > return 0;
> > case KCOV_DISABLE:
> > - kcov_debug("KCOV_DISABLE\n");
> > /* Disable coverage for the current task. */
> > unused = arg;
> > if (unused != 0 || current->kcov != kcov)
> > @@ -610,7 +621,6 @@ static int kcov_ioctl_locked(struct kcov *kcov, unsigned int cmd,
> > kcov_put(kcov);
> > return 0;
> > case KCOV_REMOTE_ENABLE:
> > - kcov_debug("KCOV_REMOTE_ENABLE\n");
> > if (kcov->mode != KCOV_MODE_INIT || !kcov->area)
> > return -EINVAL;
> > t = current;
> > @@ -627,41 +637,42 @@ static int kcov_ioctl_locked(struct kcov *kcov, unsigned int cmd,
> > kcov->t = t;
> > kcov->remote = true;
> > kcov->remote_size = remote_arg->area_size;
> > - spin_lock(&kcov_remote_lock);
> > + spin_lock_irqsave(&kcov_remote_lock, flags);
> > for (i = 0; i < remote_arg->num_handles; i++) {
> > - kcov_debug("handle %llx\n", remote_arg->handles[i]);
> > if (!kcov_check_handle(remote_arg->handles[i],
> > false, true, false)) {
> > - spin_unlock(&kcov_remote_lock);
> > + spin_unlock_irqrestore(&kcov_remote_lock,
> > + flags);
> > kcov_disable(t, kcov);
> > return -EINVAL;
> > }
> > remote = kcov_remote_add(kcov, remote_arg->handles[i]);
> > if (IS_ERR(remote)) {
> > - spin_unlock(&kcov_remote_lock);
> > + spin_unlock_irqrestore(&kcov_remote_lock,
> > + flags);
> > kcov_disable(t, kcov);
> > return PTR_ERR(remote);
> > }
> > }
> > if (remote_arg->common_handle) {
> > - kcov_debug("common handle %llx\n",
> > - remote_arg->common_handle);
> > if (!kcov_check_handle(remote_arg->common_handle,
> > true, false, false)) {
> > - spin_unlock(&kcov_remote_lock);
> > + spin_unlock_irqrestore(&kcov_remote_lock,
> > + flags);
> > kcov_disable(t, kcov);
> > return -EINVAL;
> > }
> > remote = kcov_remote_add(kcov,
> > remote_arg->common_handle);
> > if (IS_ERR(remote)) {
> > - spin_unlock(&kcov_remote_lock);
> > + spin_unlock_irqrestore(&kcov_remote_lock,
> > + flags);
> > kcov_disable(t, kcov);
> > return PTR_ERR(remote);
> > }
> > t->kcov_handle = remote_arg->common_handle;
> > }
> > - spin_unlock(&kcov_remote_lock);
> > + spin_unlock_irqrestore(&kcov_remote_lock, flags);
> > /* Put either in kcov_task_exit() or in KCOV_DISABLE. */
> > kcov_get(kcov);
> > return 0;
> > @@ -677,6 +688,7 @@ static long kcov_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
> > struct kcov_remote_arg *remote_arg = NULL;
> > unsigned int remote_num_handles;
> > unsigned long remote_arg_size;
> > + unsigned long flags;
> >
> > if (cmd == KCOV_REMOTE_ENABLE) {
> > if (get_user(remote_num_handles, (unsigned __user *)(arg +
> > @@ -697,9 +709,9 @@ static long kcov_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
> > }
> >
> > kcov = filep->private_data;
> > - spin_lock(&kcov->lock);
> > + spin_lock_irqsave(&kcov->lock, flags);
> > res = kcov_ioctl_locked(kcov, cmd, arg);
> > - spin_unlock(&kcov->lock);
> > + spin_unlock_irqrestore(&kcov->lock, flags);
> >
> > kfree(remote_arg);
> >
> > @@ -716,8 +728,8 @@ static const struct file_operations kcov_fops = {
> >
> > /*
> > * kcov_remote_start() and kcov_remote_stop() can be used to annotate a section
> > - * of code in a kernel background thread to allow kcov to be used to collect
> > - * coverage from that part of code.
> > + * of code in a kernel background thread or in an interrupt to allow kcov to be
> > + * used to collect coverage from that part of code.
> > *
> > * The handle argument of kcov_remote_start() identifies a code section that is
> > * used for coverage collection. A userspace process passes this handle to
> > @@ -728,9 +740,9 @@ static const struct file_operations kcov_fops = {
> > * the type of the kernel thread whose code is being annotated.
> > *
> > * For global kernel threads that are spawned in a limited number of instances
> > - * (e.g. one USB hub_event() worker thread is spawned per USB HCD), each
> > - * instance must be assigned a unique 4-byte instance id. The instance id is
> > - * then combined with a 1-byte subsystem id to get a handle via
> > + * (e.g. one USB hub_event() worker thread is spawned per USB HCD) and for
> > + * interrupts, each instance must be assigned a unique 4-byte instance id. The
> > + * instance id is then combined with a 1-byte subsystem id to get a handle via
> > * kcov_remote_handle(subsystem_id, instance_id).
> > *
> > * For local kernel threads that are spawned from system calls handler when a
> > @@ -749,13 +761,48 @@ static const struct file_operations kcov_fops = {
> > *
> > * See Documentation/dev-tools/kcov.rst for more details.
> > *
> > - * Internally, this function looks up the kcov device associated with the
> > + * Internally, kcov_remote_start() looks up the kcov device associated with the
> > * provided handle, allocates an area for coverage collection, and saves the
> > * pointers to kcov and area into the current task_struct to allow coverage to
> > * be collected via __sanitizer_cov_trace_pc()
> > * In turns kcov_remote_stop() clears those pointers from task_struct to stop
> > * collecting coverage and copies all collected coverage into the kcov area.
> > */
> > +
> > +void kcov_remote_swap_irq(struct task_struct *t,
> > + struct kcov_remote_irq_data *irq)
> > +{
> > + t->kcov = xchg(&irq->kcov, t->kcov);
> > + t->kcov_size = xchg(&irq->size, t->kcov_size);
>
>
> > + t->kcov_area = xchg(&irq->area, t->kcov_area);
> > + t->kcov_mode = xchg(&irq->mode, t->kcov_mode);
>
> Do we need these xchg here? Why?
> They look fishy. If somebody actually uses these fields concurrently,
> then they can get inconsistent kcov_area/size/mode, which will explode
> badly (overwrite beyond area). So these field atomic updates only seem
> to give a false sense of safety.
> If nobody uses this, then no need in atomic updates.
> If somebody uses this, atomic updates won't help.
>
>
> > +}
> > +
> > +bool kcov_remote_start_irq(struct task_struct *t)
> > +{
> > + struct kcov_remote_irq_data *irq = &get_cpu_var(kcov_remote_irq);
>
> We are already (1) in interrupt and (2) inside of spin_lock_irqsave,
> and we seem to rely on that below when we do non-atomic xchg on
> t->kcov_interrupt. Do we need get/put_cpu_var here? It seems using
> this_cpu_ptr will make it simpler.
>
>
> > +
> > + if (t->kcov_interrupt) {
> > + /* Nested interrupt. */
> > + put_cpu_var(kcov_remote_irq);
> > + return false;
> > + }
> > + t->kcov_interrupt = true;
>
> I can't fully understand what happens with nested interrupts.
> We very much rely on the fact that we disabled interrupts for the
> whole traced region.
> But what happens with NMIs? Let's say nmi arrives when we set
> t->kcov_interrupt = true but did not execute kcov_remote_swap_irq yet
> (or worse, in the middle of kcov_remote_swap_irq)?
>
>
> > + kcov_remote_swap_irq(t, irq);
> > + put_cpu_var(kcov_remote_irq);
> > + return true;
> > +}
> > +
> > +void kcov_remote_stop_irq(struct task_struct *t)
> > +{
> > + struct kcov_remote_irq_data *irq = &get_cpu_var(kcov_remote_irq);
> > +
> > + kcov_remote_swap_irq(t, irq);
>
> What is an NMI arrives while we are swapping?
>
>
> > + t->kcov_interrupt = false;
> > + local_irq_restore(irq->flags);
>
> Interesting. Is it OK to prolong irq disabling region that much?...
>
> > + put_cpu_var(kcov_remote_irq);
> > +}
> > +
> > void kcov_remote_start(u64 handle)
> > {
> > struct kcov_remote *remote;
> > @@ -764,28 +811,32 @@ void kcov_remote_start(u64 handle)
> > unsigned int size;
> > enum kcov_mode mode;
> > int sequence;
> > + unsigned long flags;
> >
> > if (WARN_ON(!kcov_check_handle(handle, true, true, true)))
> > return;
> > - if (WARN_ON(!in_task()))
> > + if (WARN_ON(in_nmi()))
> > return;
> > t = current;
> > /*
> > - * Check that kcov_remote_start is not called twice
> > - * nor called by user tasks (with enabled kcov).
> > + * Check that kcov_remote_start is not called twice in background
> > + * threads nor called by user tasks (with enabled kcov).
> > */
> > - if (WARN_ON(t->kcov))
> > + if (WARN_ON(in_task() && t->kcov))
> > return;
> >
> > - kcov_debug("handle = %llx\n", handle);
> > -
> > - spin_lock(&kcov_remote_lock);
> > + spin_lock_irqsave(&kcov_remote_lock, flags);
> > remote = kcov_remote_find(handle);
> > if (!remote) {
> > - kcov_debug("no remote found");
> > - spin_unlock(&kcov_remote_lock);
> > + spin_unlock_irqrestore(&kcov_remote_lock, flags);
> > return;
> > }
> > + if (!in_task() && !kcov_remote_start_irq(t)) {
> > + spin_unlock_irqrestore(&kcov_remote_lock, flags);
> > + return;
> > + }
> > + kcov_debug("handle = %llx, context: %s\n", handle,
> > + in_task() ? "task" : "irq");
> > /* Put in kcov_remote_stop(). */
> > kcov_get(remote->kcov);
> > t->kcov = remote->kcov;
> > @@ -793,11 +844,19 @@ void kcov_remote_start(u64 handle)
> > * Read kcov fields before unlock to prevent races with
> > * KCOV_DISABLE / kcov_remote_reset().
> > */
> > - size = remote->kcov->remote_size;
> > + size = min_t(unsigned int, remote->kcov->remote_size,
> > + CONFIG_KCOV_IRQ_AREA_SIZE);
>
> This seems to only be relevant for the irq case.
>
> > mode = remote->kcov->mode;
> > sequence = remote->kcov->sequence;
> > - area = kcov_remote_area_get(size);
> > - spin_unlock(&kcov_remote_lock);
> > + if (in_task()) {
> > + area = kcov_remote_area_get(size);
> > + spin_unlock_irqrestore(&kcov_remote_lock, flags);
> > + } else {
> > + area = *this_cpu_ptr(&kcov_irq_area);
> > + /* Flags are restored by kcov_remote_stop_irq(). */
> > + this_cpu_ptr(&kcov_remote_irq)->flags = flags;
> > + spin_unlock(&kcov_remote_lock);
> > + }
> >
> > if (!area) {
> > area = vmalloc(size * sizeof(unsigned long));
>
> And this only for the !irq case, so may be better to move inside of
> the if above to not confuse the reader.
>
>
> > @@ -810,8 +869,6 @@ void kcov_remote_start(u64 handle)
> > /* Reset coverage size. */
> > *(u64 *)area = 0;
> >
> > - kcov_debug("area = %px, size = %u", area, size);
> > -
> > kcov_start(t, size, area, mode, sequence);
>
> Don't we overwrite and lose the original t->kcov_sequence here?
Overall it may benefit from more explicitly writing down exact
sequence of changes that happens with task state during start/stop.
We try to reuse some code in kcov_remote_swap_irq, but it confused me
a lot initially until I realized that we don't actually swap and that
rather save and restore.
We either need to rely on kcov_interrupt to start/stop tracing, but
then carefully arrange memory accesses in
kcov_remote_start_irq/stop_irq as we do in kcov_start/stop; or maybe
play by the rules and call kcov_stop on the current task, update
state, call kcov_start with interrupt state and do the opposite when
we stop irq tracing.
