[PATCH 030/143] USB: atmel_usba_udc: use helper functions to determine endpoint type and direction

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>

Use helper functions to determine the type and direction of an endpoint
instead of fiddling with bEndpointAddress and bmAttributes

Signed-off-by: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
Acked-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
 drivers/usb/gadget/atmel_usba_udc.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 05c913c..7a8f442 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -550,12 +550,12 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
 			ep->ep.name, ept_cfg, maxpacket);
 
-	if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
+	if (usb_endpoint_dir_in(desc)) {
 		ep->is_in = 1;
 		ept_cfg |= USBA_EPT_DIR_IN;
 	}
 
-	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	switch (usb_endpoint_type(desc)) {
 	case USB_ENDPOINT_XFER_CONTROL:
 		ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL);
 		ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE);
-- 
1.6.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux