Re: [PATCH 1/1] usb: serial: option: add ZLP support for 0x1bc7/0x9010

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Johan,

Il giorno ven 20 set 2019 alle ore 12:24 Daniele Palmas
<dnlplm@xxxxxxxxx> ha scritto:
>
> Telit FN980 flashing device 0x1bc7/0x9010 requires zero packet
> to be sent if out data size is equal to the endpoint max size.
>
> Signed-off-by: Daniele Palmas <dnlplm@xxxxxxxxx>

should I resend this one or is there a problem with the patch?

Thanks,
Daniele

> ---
>  drivers/usb/serial/option.c   | 8 ++++++++
>  drivers/usb/serial/usb-wwan.h | 1 +
>  drivers/usb/serial/usb_wwan.c | 9 +++++++++
>  3 files changed, 18 insertions(+)
>
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index 38e920ac7f82..ce5ceafe2ccd 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -565,6 +565,9 @@ static void option_instat_callback(struct urb *urb);
>  /* Interface must have two endpoints */
>  #define NUMEP2         BIT(16)
>
> +/* Device needs ZLP */
> +#define ZLP            BIT(17)
> +
>
>  static const struct usb_device_id option_ids[] = {
>         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
> @@ -1184,6 +1187,8 @@ static const struct usb_device_id option_ids[] = {
>           .driver_info = NCTRL(0) | RSVD(1) },
>         { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff),    /* Telit LN940 (MBIM) */
>           .driver_info = NCTRL(0) },
> +       { USB_DEVICE(TELIT_VENDOR_ID, 0x9010),                          /* Telit SBL FN980 flashing device */
> +         .driver_info = NCTRL(0) | ZLP },
>         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
>         { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
>           .driver_info = RSVD(1) },
> @@ -2079,6 +2084,9 @@ static int option_attach(struct usb_serial *serial)
>         if (!(device_flags & NCTRL(iface_desc->bInterfaceNumber)))
>                 data->use_send_setup = 1;
>
> +       if (device_flags & ZLP)
> +               data->use_zlp = 1;
> +
>         spin_lock_init(&data->susp_lock);
>
>         usb_set_serial_data(serial, data);
> diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h
> index 1c120eaf4091..934e9361cf6b 100644
> --- a/drivers/usb/serial/usb-wwan.h
> +++ b/drivers/usb/serial/usb-wwan.h
> @@ -38,6 +38,7 @@ struct usb_wwan_intf_private {
>         spinlock_t susp_lock;
>         unsigned int suspended:1;
>         unsigned int use_send_setup:1;
> +       unsigned int use_zlp:1;
>         int in_flight;
>         unsigned int open_ports;
>         void *private;
> diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
> index 7e855c87e4f7..8066b5e2d305 100644
> --- a/drivers/usb/serial/usb_wwan.c
> +++ b/drivers/usb/serial/usb_wwan.c
> @@ -228,6 +228,15 @@ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
>                 } else {
>                         intfdata->in_flight++;
>                         spin_unlock_irqrestore(&intfdata->susp_lock, flags);
> +                       if (intfdata->use_zlp) {
> +                               unsigned int ep_maxp;
> +
> +                               ep_maxp = usb_maxpacket(port->serial->dev,
> +                                                       this_urb->pipe, 1);
> +
> +                               if (ep_maxp && (todo % ep_maxp == 0))
> +                                       this_urb->transfer_flags |= URB_ZERO_PACKET;
> +                       }
>                         err = usb_submit_urb(this_urb, GFP_ATOMIC);
>                         if (err) {
>                                 dev_err(&port->dev,
> --
> 2.17.1
>



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux