On Wed, Nov 13, 2019 at 11:14:05AM +0100, Aleksander Morgado wrote:
> These are the Foxconn-branded variants of the Dell DW5821e modules,
> same USB layout as those. The device exposes AT, NMEA and DIAG ports
> in both USB configurations.
>
> P: Vendor=0489 ProdID=e0b4 Rev=03.18
> S: Manufacturer=FII
> S: Product=T77W968 LTE
> S: SerialNumber=0123456789ABCDEF
> C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
> I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
> I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
> I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
>
> P: Vendor=0489 ProdID=e0b4 Rev=03.18
> S: Manufacturer=FII
> S: Product=T77W968 LTE
> S: SerialNumber=0123456789ABCDEF
> C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA
> I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
> I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
> I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
> I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
>
> Signed-off-by: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
> ---
> drivers/usb/serial/option.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index 2023f1f4edaf..787f004f24fc 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -555,6 +555,11 @@ static void option_instat_callback(struct urb *urb);
> #define WETELECOM_PRODUCT_6802 0x6802
> #define WETELECOM_PRODUCT_WMD300 0x6803
>
> +/* Foxconn products */
> +#define FOXCONN_VENDOR_ID 0x0489
> +#define FOXCONN_PRODUCT_T77W968 0xe0b4
> +#define FOXCONN_PRODUCT_T77W968_ESIM 0xe0b5
> +
I dropped these new defines in favour of using numerical constants
before applying:
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 2023f1f4edaf..e9491d400a24 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1993,6 +1993,10 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x13) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x14) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) },
+ { USB_DEVICE(0x0489, 0xe0b4), /* Foxconn T77W968 */
+ .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
+ { USB_DEVICE(0x0489, 0xe0b5), /* Foxconn T77W968 ESIM */
+ .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
{ USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 */
.driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
{ USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */
> /* Device flags */
>
> @@ -1999,6 +2004,10 @@ static const struct usb_device_id option_ids[] = {
> .driver_info = RSVD(4) | RSVD(5) },
> { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */
> .driver_info = RSVD(6) },
> + { USB_DEVICE(FOXCONN_VENDOR_ID, FOXCONN_PRODUCT_T77W968),
> + .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
> + { USB_DEVICE(FOXCONN_VENDOR_ID, FOXCONN_PRODUCT_T77W968_ESIM),
> + .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
> { } /* Terminating entry */
> };
> MODULE_DEVICE_TABLE(usb, option_ids);
I'm trying to avoid adding new defines, but sometimes make exceptions
when when we already have related entries in place.
Thanks,
Johan
