Currently, most gadget drivers handle isoc transfers on a best effort bases: If the request queue runs empty, then there will simply be gaps in the isoc data stream. The UVC gadget depends on this behaviour. It simply provides new requests when video frames are available and assumes that they are sent as soon as possible. The dwc3 gadget currently works differently: It assumes that there is a contiguous stream of requests without any gaps. If a request is too late, then it is dropped by the hardware. For the UVC gadget this means that a live stream stops after the first frame because all following requests are late. This patch changes the behaviour of the dwc3 gadget driver to match the expectations. If a request arrives too late, then the transfer will be restart to create the needed gap. A request is late if: 1. There are currently no requests queued in the hardware 2. The current frame number provided by DSTS does not match the frame number returned by the last transfer. If this happens transfers are stopped. The following XferNotReady provides the new correct frame number and restarts the transfer. Signed-off-by: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx> --- drivers/usb/dwc3/gadget.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index ac4673d91939..eb7f09929f28 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1473,6 +1473,14 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) return __dwc3_gadget_start_isoc(dep); } } + if ((dep->flags & DWC3_EP_TRANSFER_STARTED) && + list_empty(&dep->started_list) && + ((dep->frame_number & 0x3fff) != + __dwc3_gadget_get_frame(dwc))) { + dwc3_stop_active_transfer(dep, true, true); + dep->flags = DWC3_EP_ENABLED; + return 0; + } } return __dwc3_gadget_kick_transfer(dep, false); -- 2.20.1