[PATCH AUTOSEL 4.14 027/109] usb: chipidea: imx: enable OTG overcurrent in case USB subsystem is already started

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Nicolas Adell <nicolas.adell@xxxxxxxx>

[ Upstream commit 1dedbdf2bbb1ede8d96f35f9845ecae179dc1988 ]

When initializing the USB subsystem before starting the kernel,
OTG overcurrent detection is disabled. In case the OTG polarity of
overcurrent is low active, the overcurrent detection is never enabled
again and events cannot be reported as expected. Because imx usb
overcurrent polarity is low active by default, only detection needs
to be enable in usbmisc init function.

Signed-off-by: Nicolas Adell <nicolas.adell@xxxxxxxx>
Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/usb/chipidea/usbmisc_imx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 9f4a0185dd609..b7477fd4443a3 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -343,6 +343,8 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
 	} else if (data->oc_polarity == 1) {
 		/* High active */
 		reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY);
+	} else {
+		reg &= ~(MX6_BM_OVER_CUR_DIS);
 	}
 	writel(reg, usbmisc->base + data->index * 4);
 
-- 
2.20.1




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux