On Wed, Nov 06, 2019 at 07:34:43PM +0900, Yoshihiro Shimoda wrote: > Convert Renesas USBHS (HS-USB) controller bindings documentation > to json-schema. > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> > --- > Changes from v1: > - Remove enum from RZ/A[12] compatibles. > - Remove comments from reg and clocks. > - Change maxItems from 2 to 3 on clocks for USB 2.0 clock selector. > - Add items on clocks. > - Remove $ref from a gpio property. > - Add maxItems on phys, phy-names and resets. > - Remove generic.txt file reference. > - Remove the last blank line. > https://patchwork.kernel.org/patch/11205919/ > > .../devicetree/bindings/usb/renesas,usbhs.txt | 58 ---------- > .../devicetree/bindings/usb/renesas,usbhs.yaml | 128 +++++++++++++++++++++ > 2 files changed, 128 insertions(+), 58 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/usb/renesas,usbhs.txt > create mode 100644 Documentation/devicetree/bindings/usb/renesas,usbhs.yaml > > diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.txt b/Documentation/devicetree/bindings/usb/renesas,usbhs.txt > deleted file mode 100644 > index 06abe99..00000000 > --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.txt > +++ /dev/null > @@ -1,58 +0,0 @@ > -Renesas Electronics USBHS driver > - > -Required properties: > - - compatible: Must contain one or more of the following: > - > - - "renesas,usbhs-r8a7743" for r8a7743 (RZ/G1M) compatible device > - - "renesas,usbhs-r8a7744" for r8a7744 (RZ/G1N) compatible device > - - "renesas,usbhs-r8a7745" for r8a7745 (RZ/G1E) compatible device > - - "renesas,usbhs-r8a77470" for r8a77470 (RZ/G1C) compatible device > - - "renesas,usbhs-r8a774a1" for r8a774a1 (RZ/G2M) compatible device > - - "renesas,usbhs-r8a774b1" for r8a774b1 (RZ/G2N) compatible device > - - "renesas,usbhs-r8a774c0" for r8a774c0 (RZ/G2E) compatible device > - - "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device > - - "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device > - - "renesas,usbhs-r8a7792" for r8a7792 (R-Car V2H) compatible device > - - "renesas,usbhs-r8a7793" for r8a7793 (R-Car M2-N) compatible device > - - "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device > - - "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device > - - "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device > - - "renesas,usbhs-r8a77965" for r8a77965 (R-Car M3-N) compatible device > - - "renesas,usbhs-r8a77990" for r8a77990 (R-Car E3) compatible device > - - "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device > - - "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device > - - "renesas,usbhs-r7s9210" for r7s9210 (RZ/A2) compatible device > - - "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices > - - "renesas,rcar-gen3-usbhs" for R-Car Gen3 or RZ/G2 compatible devices > - - "renesas,rza1-usbhs" for RZ/A1 compatible device > - - "renesas,rza2-usbhs" for RZ/A2 compatible device > - > - When compatible with the generic version, nodes must list the > - SoC-specific version corresponding to the platform first followed > - by the generic version. > - > - - reg: Base address and length of the register for the USBHS > - - interrupts: Interrupt specifier for the USBHS > - - clocks: A list of phandle + clock specifier pairs. > - - In case of "renesas,rcar-gen3-usbhs", two clocks are required. > - First clock should be peripheral and second one should be host. > - - In case of except above, one clock is required. First clock > - should be peripheral. > - > -Optional properties: > - - renesas,buswait: Integer to use BUSWAIT register > - - renesas,enable-gpio: A gpio specifier to check GPIO determining if USB > - function should be enabled > - - phys: phandle + phy specifier pair > - - phy-names: must be "usb" > - - dmas: Must contain a list of references to DMA specifiers. > - - dma-names : named "ch%d", where %d is the channel number ranging from zero > - to the number of channels (DnFIFOs) minus one. > - > -Example: > - usbhs: usb@e6590000 { > - compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs"; > - reg = <0 0xe6590000 0 0x100>; > - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; > - }; > diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml > new file mode 100644 > index 00000000..1d776d1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml > @@ -0,0 +1,128 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/usb/renesas,usbhs.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Renesas USBHS (HS-USB) controller > + > +maintainers: > + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> > + > +properties: > + compatible: > + oneOf: > + - items: > + - const: renesas,usbhs-r7s72100 # RZ/A1 > + - const: renesas,rza1-usbhs > + > + - items: > + - const: renesas,usbhs-r7s9210 # RZ/A2 > + - const: renesas,rza2-usbhs > + > + - items: > + - enum: > + - renesas,usbhs-r8a7743 # RZ/G1M > + - renesas,usbhs-r8a7744 # RZ/G1N > + - renesas,usbhs-r8a7745 # RZ/G1E > + - renesas,usbhs-r8a77470 # RZ/G1C > + - renesas,usbhs-r8a7790 # R-Car H2 > + - renesas,usbhs-r8a7791 # R-Car M2-W > + - renesas,usbhs-r8a7792 # R-Car V2H > + - renesas,usbhs-r8a7793 # R-Car M2-N > + - renesas,usbhs-r8a7794 # R-Car E2 > + - const: renesas,rcar-gen2-usbhs > + > + - items: > + - enum: > + - renesas,usbhs-r8a774a1 # RZ/G2M > + - renesas,usbhs-r8a774b1 # RZ/G2N > + - renesas,usbhs-r8a774c0 # RZ/G2E > + - renesas,usbhs-r8a7795 # R-Car H3 > + - renesas,usbhs-r8a7796 # R-Car M3-W > + - renesas,usbhs-r8a77965 # R-Car M3-N > + - renesas,usbhs-r8a77990 # R-Car E3 > + - renesas,usbhs-r8a77995 # R-Car D3 > + - const: renesas,rcar-gen3-usbhs > + > + reg: > + maxItems: 1 > + > + clocks: > + minItems: 1 > + maxItems: 3 > + items: > + - description: USB 2.0 host > + - description: USB 2.0 peripheral > + - description: USB 2.0 clock selector > + > + interrupts: > + maxItems: 1 > + > + renesas,buswait: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + Integer to use BUSWAIT register. > + > + renesas,enable-gpio: > + description: | > + gpio specifier to check GPIO determining if USB function should be > + enabled. > + > + phys: > + maxItems: 1 > + items: > + - description: phandle + phy specifier pair. > + > + phy-names: > + maxItems: 1 > + items: > + - const: usb > + > + dmas: > + minItems: 2 > + maxItems: 4 > + > + dma-names: > + minItems: 2 > + maxItems: 4 > + items: > + - enum: [ch0, ch1, ch2, ch3] This is saying the 1st item is one of the 4 values and the others are undefined. I think you want: items: - const: ch0 - const: ch1 - const: ch2 - const: ch3 > + > + dr_mode: > + $ref: /schemas/types.yaml#/definitions/string > + description: | > + tells Dual-Role USB controllers that we want to work on a particular > + mode. Valid arguments are "host", "peripheral" and "otg". In case this > + attribute isn't passed via DT, USB DRD controllers should default to OTG. Assume we have a common binding for this and all you need is: dr_mode: true > + > + power-domains: > + maxItems: 1 > + > + resets: > + minItems: 1 > + maxItems: 2 > + items: > + - description: USB 2.0 host > + - description: USB 2.0 peripheral > + > +required: > + - compatible > + - reg > + - clocks > + - interrupts > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/r8a7790-cpg-mssr.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/power/r8a7790-sysc.h> > + > + usbhs: usb@e6590000 { > + compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs"; > + reg = <0 0xe6590000 0 0x100>; > + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cpg CPG_MOD 704>; > + }; > -- > 2.7.4 >
