Re: [PATCH] scsi: Fix scsi_get/set_resid() interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/30/19 4:12 PM, Bart Van Assche wrote:
On 10/30/19 1:30 AM, Hannes Reinecke wrote:
On 10/28/19 9:38 PM, Bart Van Assche wrote:
If the residual is changed from signed into unsigned, how is a SCSI LLD expected to report the difference between residual overflow and residual underflow to the SCSI core?

You don't have to. To quote RFC 3720 page 122:

      bit 5 - (O) set for Residual Overflow.  In this case, the Residual
        Count indicates the number of bytes that were not transferred
        because the initiator's Expected Data Transfer Length was not
        sufficient.  For a bidirectional operation, the Residual Count
        contains the residual for the write operation.

IE the 'overflow' setting in the iSCSI command response is an indicator that there _would_ be more data if the command request _would_ have specified a larger buffer. But as it didn't, the entire buffer was filled, and the overflow counter is set. Which, of course, is then ignored by the linux SCSI stack as the request got all data, and the residual is set to zero. Then it's left to the caller to re-send with a larger buffer if required. But it's nothing the SCSI stack can nor should be attempting on its own.

Hi Hannes,

I do not agree that reporting a residual overflow by calling scsi_set_resid(..., 0) is acceptable. For reads a residual overflow means that the length specified in the CDB (scsi_bufflen()) exceeds the data buffer size (length of scsi_sglist()). I think it's dangerous to report to the block layer that such requests completed successfully and with residual zero.

Dangerous how?

fcp3:
For read operations and write operations, if the FCP_RESID_OVER bit is set to one, the FCP_RESID field contains the excess of the number of bytes required by the SCSI command to be transferred over the number of bytes specified by the FCP_DL field.

SAS doesn't even have the notion of residuals

srp04:
DOOVER , when set to one, indicates that the DATA-OUT RESIDUAL COUNT field is valid and contains the count of data bytes that could not be transferred from the data-out buffer because the length of the data-out buffer was not sufficient. The application client should examine the DATA-OUT RESIDUAL COUNT field in the context of the command to determine whether or not an error condition occurred.

iSCSI we've already covered.

In all cases, the overflow value is an _indicator_ that additional data is available, but was not transferred due to the lack of space.
So we will not have any buffer overflow as data is never transferred.

And in most cases an overflow is actually desired; it is a pretty common use pattern to send a SCSI command with a small enough buffer to return the length of available data, and then send the actual command knowing how large the buffer needs to be.
See for example scsi_report_lun_scan() or the VPD handling code.

So again, I don't think it's something we need to worry about.

Cheers,

Hannes
--
Dr. Hannes Reinecke            Teamlead Storage & Networking
hare@xxxxxxx                              +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Felix Imendörffer, Mary Higgins, Sri Rasiah
HRB 21284 (AG Nürnberg)



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux