Adds usb ID for MOXA UPort 2210. This device contains mos7820 but
it passes GPIO0 check implemented by driver and it's detected as
mos7840. Hence product id check is added to force mos7820 mode.
---
drivers/usb/serial/mos7840.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index a698d46ba773..8afc165cc984 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -119,10 +119,13 @@
/* This driver also supports
* ATEN UC2324 device using Moschip MCS7840
* ATEN UC2322 device using Moschip MCS7820
+ * MOXA UPort 2210 device using Moschip MCS7820
*/
#define USB_VENDOR_ID_ATENINTL 0x0557
#define ATENINTL_DEVICE_ID_UC2324 0x2011
#define ATENINTL_DEVICE_ID_UC2322 0x7820
+#define MXU2_VENDOR_ID 0x110a
+#define MXU2_DEVICE_ID_2210 0x2210
/* Interrupt Routine Defines */
@@ -195,6 +198,7 @@ static const struct usb_device_id id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
+ {USB_DEVICE(MXU2_VENDOR_ID, MXU2_DEVICE_ID_2210)},
{} /* terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
@@ -2030,6 +2034,11 @@ static int mos7840_probe(struct usb_serial *serial,
goto out;
}
+ if (product == MXU2_DEVICE_ID_2210) {
+ device_type = MOSCHIP_DEVICE_ID_7820;
+ goto out;
+ }
+
buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
if (!buf)
return -ENOMEM;
--
2.23.0
