[PATCH] usb: cdns3: gadget: Fix g_audio use case when connected to Super-Speed host

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Take into account gadget driver's speed limit when programming
controller speed.

Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
Hi Greg,

Please apply this for -rc.
Without this, g_audio is broken on cdns3 USB controller is
connected to a Super-Speed host.

cheers,
-roger

 drivers/usb/cdns3/gadget.c | 31 ++++++++++++++++++++++++++-----
 1 file changed, 26 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
index 40dad4e8d0dc..1c724c20d468 100644
--- a/drivers/usb/cdns3/gadget.c
+++ b/drivers/usb/cdns3/gadget.c
@@ -2338,9 +2338,35 @@ static int cdns3_gadget_udc_start(struct usb_gadget *gadget,
 {
 	struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
 	unsigned long flags;
+	enum usb_device_speed max_speed = driver->max_speed;
 
 	spin_lock_irqsave(&priv_dev->lock, flags);
 	priv_dev->gadget_driver = driver;
+
+	/* limit speed if necessary */
+	max_speed = min(driver->max_speed, gadget->max_speed);
+
+	switch (max_speed) {
+	case USB_SPEED_FULL:
+		writel(USB_CONF_SFORCE_FS, &priv_dev->regs->usb_conf);
+		writel(USB_CONF_USB3DIS, &priv_dev->regs->usb_conf);
+		break;
+	case USB_SPEED_HIGH:
+		writel(USB_CONF_USB3DIS, &priv_dev->regs->usb_conf);
+		break;
+	case USB_SPEED_SUPER:
+		break;
+	default:
+		dev_err(priv_dev->dev,
+			"invalid maximum_speed parameter %d\n",
+			max_speed);
+		/* fall through */
+	case USB_SPEED_UNKNOWN:
+		/* default to superspeed */
+		max_speed = USB_SPEED_SUPER;
+		break;
+	}
+
 	cdns3_gadget_config(priv_dev);
 	spin_unlock_irqrestore(&priv_dev->lock, flags);
 	return 0;
@@ -2570,12 +2596,7 @@ static int cdns3_gadget_start(struct cdns3 *cdns)
 	/* Check the maximum_speed parameter */
 	switch (max_speed) {
 	case USB_SPEED_FULL:
-		writel(USB_CONF_SFORCE_FS, &priv_dev->regs->usb_conf);
-		writel(USB_CONF_USB3DIS, &priv_dev->regs->usb_conf);
-		break;
 	case USB_SPEED_HIGH:
-		writel(USB_CONF_USB3DIS, &priv_dev->regs->usb_conf);
-		break;
 	case USB_SPEED_SUPER:
 		break;
 	default:
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux