Hi,
John Stultz <john.stultz@xxxxxxxxxx> writes:
> The dwc3 core binding specifies three clocks:
> ref, bus_early, and suspend
>
> which are all controlled in the driver together.
>
> However some variants of the hardware my not have all three clks
^^
may
In fact *all* platforms have all three clocks. It's just that in some
cases clock pins are shorted together (or take input from same clock).
> So this patch reworks the reading of the clks from the dts to
> use devm_clk_bulk_get_all() will will fetch all the clocks
^^^^
which?
> specified in the dts together.
>
> This patch was reccomended by Rob Herring <robh@xxxxxxxxxx>
> as an alternative to creating multiple bindings for each variant
> of hardware when the only unique bits were clocks and resets.
>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> CC: ShuFan Lee <shufan_lee@xxxxxxxxxxx>
> Cc: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> Cc: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
> Cc: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> Cc: Yu Chen <chenyu56@xxxxxxxxxx>
> Cc: Felipe Balbi <balbi@xxxxxxxxxx>
> Cc: Hans de Goede <hdegoede@xxxxxxxxxx>
> Cc: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> Cc: Jun Li <lijun.kernel@xxxxxxxxx>
> Cc: Valentin Schneider <valentin.schneider@xxxxxxx>
> Cc: Jack Pham <jackp@xxxxxxxxxxxxxx>
> Cc: linux-usb@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> Suggested-by: Rob Herring <robh@xxxxxxxxxx>
> Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
> ---
> v3: Rework dwc3 core rather then adding another dwc-of-simple
> binding.
> ---
> drivers/usb/dwc3/core.c | 20 +++++---------------
> 1 file changed, 5 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index a039e35ec7ad..4d4f1836b62c 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -305,12 +305,6 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)
> return 0;
> }
>
> -static const struct clk_bulk_data dwc3_core_clks[] = {
> - { .id = "ref" },
> - { .id = "bus_early" },
> - { .id = "suspend" },
> -};
another option would be to pass three clocks with the same phandle. That
would even make sure that clock usage counts are correct, no?
--
balbi
Attachment:
signature.asc
Description: PGP signature
