On 10/24/2019 7:28 PM, Geert Uytterhoeven wrote:
> Fix misspellings of "endpoint".
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Acked-by: Minas Harutyunyan <hminas@xxxxxxxxxxxx>
> ---
> drivers/usb/dwc2/core.h | 2 +-
> drivers/usb/gadget/udc/fsl_qe_udc.h | 4 ++--
> drivers/usb/gadget/udc/mv_u3d.h | 2 +-
> drivers/usb/musb/musb_gadget.c | 2 +-
> 4 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index d08d070a0fb6f598..968e03b89d04d5d8 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -134,7 +134,7 @@ struct dwc2_hsotg_req;
> * @target_frame: Targeted frame num to setup next ISOC transfer
> * @frame_overrun: Indicates SOF number overrun in DSTS
> *
> - * This is the driver's state for each registered enpoint, allowing it
> + * This is the driver's state for each registered endpoint, allowing it
> * to keep track of transactions that need doing. Each endpoint has a
> * lock to protect the state, to try and avoid using an overall lock
> * for the host controller as much as possible.
> diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.h b/drivers/usb/gadget/udc/fsl_qe_udc.h
> index 2c537a904ee73950..53ca0ff7c2cbd48c 100644
> --- a/drivers/usb/gadget/udc/fsl_qe_udc.h
> +++ b/drivers/usb/gadget/udc/fsl_qe_udc.h
> @@ -333,8 +333,8 @@ struct qe_udc {
> u32 resume_state; /* USB state to resume*/
> u32 usb_state; /* USB current state */
> u32 usb_next_state; /* USB next state */
> - u32 ep0_state; /* Enpoint zero state */
> - u32 ep0_dir; /* Enpoint zero direction: can be
> + u32 ep0_state; /* Endpoint zero state */
> + u32 ep0_dir; /* Endpoint zero direction: can be
> USB_DIR_IN or USB_DIR_OUT*/
> u32 usb_sof_count; /* SOF count */
> u32 errors; /* USB ERRORs count */
> diff --git a/drivers/usb/gadget/udc/mv_u3d.h b/drivers/usb/gadget/udc/mv_u3d.h
> index 982625b7197a0d9c..66b84f792f646bb9 100644
> --- a/drivers/usb/gadget/udc/mv_u3d.h
> +++ b/drivers/usb/gadget/udc/mv_u3d.h
> @@ -138,7 +138,7 @@ struct mv_u3d_op_regs {
> u32 doorbell; /* doorbell register */
> };
>
> -/* control enpoint enable registers */
> +/* control endpoint enable registers */
> struct epxcr {
> u32 epxoutcr0; /* ep out control 0 register */
> u32 epxoutcr1; /* ep out control 1 register */
> diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
> index 2cb31fc0cd601eb4..f62ffaede1abba48 100644
> --- a/drivers/usb/musb/musb_gadget.c
> +++ b/drivers/usb/musb/musb_gadget.c
> @@ -1315,7 +1315,7 @@ static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
> }
>
> /*
> - * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any
> + * Set or clear the halt bit of an endpoint. A halted endpoint won't tx/rx any
> * data but will queue requests.
> *
> * exported to ep0 code
>
