Re: [PATCH V2 4/7] USB: serial: f81232: Add F81534A support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 23, 2019 at 10:24:46AM +0800, Ji-Ze Hong (Peter Hong) wrote:
> The Fintek F81532A/534A/535/536 is USB-to-2/4/8/12 serial ports device
> and the serial port is default disabled when plugin computer.
> 
> The IC is contains devices as following:
> 	1. HUB (all devices is connected with this hub)
> 	2. GPIO/Control device. (enable serial port and control GPIOs)
> 	3. serial port 1 to x (2/4/8/12)
> 
> It's most same with F81232, the UART device is difference as follow:
> 	1. TX/RX bulk size is 128/512bytes
> 	2. RX bulk layout change:
> 		F81232: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]...
> 		F81534A:[LEN][Data.....][LSR]
> 
> Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@xxxxxxxxx>
> ---
>  drivers/usb/serial/f81232.c | 131 ++++++++++++++++++++++++++++++++++--
>  1 file changed, 127 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
> index e4db0aec9af0..36a17aedc2ae 100644
> --- a/drivers/usb/serial/f81232.c
> +++ b/drivers/usb/serial/f81232.c
> @@ -1,6 +1,7 @@
>  // SPDX-License-Identifier: GPL-2.0
>  /*
>   * Fintek F81232 USB to serial adaptor driver
> + * Fintek F81532A/534A/535/536 USB to 2/4/8/12 serial adaptor driver
>   *
>   * Copyright (C) 2012 Greg Kroah-Hartman (gregkh@xxxxxxxxxxxxxxxxxxx)
>   * Copyright (C) 2012 Linux Foundation
> @@ -21,11 +22,36 @@
>  #include <linux/usb/serial.h>
>  #include <linux/serial_reg.h>
>  
> +#define F81232_ID		\
> +	{ USB_DEVICE(0x1934, 0x0706) }	/* 1 port UART device */
> +
> +#define F81534A_SERIES_ID	\
> +	{ USB_DEVICE(0x2c42, 0x1602) },	/* In-Box 2 port UART device */	\
> +	{ USB_DEVICE(0x2c42, 0x1604) },	/* In-Box 4 port UART device */	\
> +	{ USB_DEVICE(0x2c42, 0x1605) },	/* In-Box 8 port UART device */	\
> +	{ USB_DEVICE(0x2c42, 0x1606) },	/* In-Box 12 port UART device */ \
> +	{ USB_DEVICE(0x2c42, 0x1608) },	/* Non-Flash type */ \
> +	{ USB_DEVICE(0x2c42, 0x1632) },	/* 2 port UART device */ \
> +	{ USB_DEVICE(0x2c42, 0x1634) },	/* 4 port UART device */ \
> +	{ USB_DEVICE(0x2c42, 0x1635) },	/* 8 port UART device */ \
> +	{ USB_DEVICE(0x2c42, 0x1636) }	/* 12 port UART device */
> +
>  static const struct usb_device_id id_table[] = {

Add a prefix here as well?

> -	{ USB_DEVICE(0x1934, 0x0706) },
> +	F81232_ID,
> +	{ }					/* Terminating entry */
> +};
> +
> +static const struct usb_device_id f81534a_id_table[] = {
> +	F81534A_SERIES_ID,
> +	{ }					/* Terminating entry */
> +};
> +
> +static const struct usb_device_id all_serial_id_table[] = {

combined_id_table would be a name more in line with the rest of the
drivers, if you end up using this one for the MODULE_DEVICE_TABLE.

> +	F81232_ID,
> +	F81534A_SERIES_ID,
>  	{ }					/* Terminating entry */
>  };
> -MODULE_DEVICE_TABLE(usb, id_table);
> +MODULE_DEVICE_TABLE(usb, all_serial_id_table);
>  
>  /* Maximum baudrate for F81232 */
>  #define F81232_MAX_BAUDRATE		1500000
> @@ -35,6 +61,10 @@ MODULE_DEVICE_TABLE(usb, id_table);
>  #define F81232_REGISTER_REQUEST		0xa0
>  #define F81232_GET_REGISTER		0xc0
>  #define F81232_SET_REGISTER		0x40
> +#define F81534A_REGISTER_REQUEST	F81232_REGISTER_REQUEST
> +#define F81534A_GET_REGISTER		F81232_GET_REGISTER
> +#define F81534A_SET_REGISTER		F81232_SET_REGISTER
> +#define F81534A_ACCESS_REG_RETRY	2

This patch doesn't use any of these, and looks like you can just use the
F81232 defines directly anyway.

>  #define SERIAL_BASE_ADDRESS		0x0120
>  #define RECEIVE_BUFFER_REGISTER		(0x00 + SERIAL_BASE_ADDRESS)
> @@ -61,6 +91,11 @@ MODULE_DEVICE_TABLE(usb, id_table);
>  #define F81232_CLK_14_77_MHZ		(BIT(1) | BIT(0))
>  #define F81232_CLK_MASK			GENMASK(1, 0)
>  
> +#define F81534A_MODE_CONF_REG		0x107
> +#define F81534A_TRIGGER_MASK		GENMASK(3, 2)
> +#define F81534A_TRIGGER_MULTPILE_4X	BIT(3)

MULTPILE typo?

> +#define F81534A_FIFO_128BYTE		(BIT(1) | BIT(0))
> +
>  struct f81232_private {
>  	struct mutex lock;
>  	u8 modem_control;
> @@ -383,6 +418,46 @@ static void f81232_process_read_urb(struct urb *urb)
>  	tty_flip_buffer_push(&port->port);
>  }
>  
> +static void f81534a_process_read_urb(struct urb *urb)
> +{
> +	struct usb_serial_port *port = urb->context;
> +	unsigned char *data = urb->transfer_buffer;
> +	char tty_flag;
> +	unsigned int i;
> +	u8 lsr;
> +	u8 len;
> +
> +	if (urb->actual_length < 3) {
> +		dev_err(&port->dev, "error actual_length: %d\n",

Rephrase as "short message received" or similar.

> +				urb->actual_length);
> +		return;
> +	}
> +
> +	len = data[0];
> +	if (len != urb->actual_length) {
> +		dev_err(&port->dev, "len(%d) != urb->actual_length(%d)\n", len,
> +				urb->actual_length);

Avoid c-expressions in error messages, rephrase this in English (e.g.
unexpected length or similar).

> +		return;
> +	}
> +
> +	/* bulk-in data: [LEN][Data.....][LSR] */
> +	lsr = data[len - 1];
> +	tty_flag = f81232_handle_lsr(port, lsr);
> +
> +	if (port->port.console && port->sysrq) {
> +		for (i = 1; i < urb->actual_length - 1; ++i)

Use len here?

And please add brackets here since the body is a multi-line statement.

> +			if (!usb_serial_handle_sysrq_char(port, data[i]))

Maybe also here.

> +				tty_insert_flip_char(&port->port, data[i],
> +						tty_flag);
> +	} else {
> +		tty_insert_flip_string_fixed_flag(&port->port, &data[1],
> +							tty_flag,
> +							urb->actual_length - 2);

len

> +	}
> +
> +	tty_flip_buffer_push(&port->port);
> +}
> +
>  static void f81232_break_ctl(struct tty_struct *tty, int break_state)
>  {
>  	struct usb_serial_port *port = tty->driver_data;
> @@ -666,6 +741,23 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
>  	return 0;
>  }
>  
> +static int f81534a_open(struct tty_struct *tty, struct usb_serial_port *port)
> +{
> +	int status;
> +	u8 val;
> +
> +	val = F81534A_TRIGGER_MULTPILE_4X | F81534A_FIFO_128BYTE;
> +	status = f81232_set_mask_register(port, F81534A_MODE_CONF_REG,
> +			F81534A_TRIGGER_MASK | F81534A_FIFO_128BYTE, val);

Add also a mask temporary if that can avoid the line break?

> +	if (status) {
> +		dev_err(&port->dev, "failed to set MODE_CONF_REG: %d\n",
> +				status);
> +		return status;
> +	}
> +
> +	return f81232_open(tty, port);
> +}
> +
>  static void f81232_close(struct usb_serial_port *port)
>  {
>  	struct f81232_private *port_priv = usb_get_serial_port_data(port);
> @@ -772,6 +864,11 @@ static int f81232_port_probe(struct usb_serial_port *port)
>  	return 0;
>  }
>  
> +static int f81534a_port_probe(struct usb_serial_port *port)
> +{
> +	return f81232_port_probe(port);
> +}

Maybe wait with adding this one until you need it and use
f18232_port_probe below instead.

> +
>  static int f81232_suspend(struct usb_serial *serial, pm_message_t message)
>  {
>  	struct usb_serial_port *port = serial->port[0];
> @@ -835,14 +932,40 @@ static struct usb_serial_driver f81232_device = {
>  	.resume =		f81232_resume,
>  };
>  
> +static struct usb_serial_driver f81534a_device = {
> +	.driver = {
> +		.owner =	THIS_MODULE,
> +		.name =		"f81534a",
> +	},
> +	.id_table =		f81534a_id_table,
> +	.num_ports =		1,
> +	.open =			f81534a_open,
> +	.close =		f81232_close,
> +	.dtr_rts =		f81232_dtr_rts,
> +	.carrier_raised =	f81232_carrier_raised,
> +	.get_serial =		f81232_get_serial_info,
> +	.break_ctl =		f81232_break_ctl,
> +	.set_termios =		f81232_set_termios,
> +	.tiocmget =		f81232_tiocmget,
> +	.tiocmset =		f81232_tiocmset,
> +	.tiocmiwait =		usb_serial_generic_tiocmiwait,
> +	.tx_empty =		f81232_tx_empty,
> +	.process_read_urb =	f81534a_process_read_urb,
> +	.read_int_callback =	f81232_read_int_callback,
> +	.port_probe =		f81534a_port_probe,
> +	.suspend =		f81232_suspend,
> +	.resume =		f81232_resume,
> +};
> +
>  static struct usb_serial_driver * const serial_drivers[] = {
>  	&f81232_device,
> +	&f81534a_device,
>  	NULL,
>  };
>  
> -module_usb_serial_driver(serial_drivers, id_table);
> +module_usb_serial_driver(serial_drivers, all_serial_id_table);
>  
> -MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver");
> +MODULE_DESCRIPTION("Fintek F81232/532A/534A/535/536 USB to serial driver");
>  MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>");
>  MODULE_AUTHOR("Peter Hong <peter_hong@xxxxxxxxxxxxx>");
>  MODULE_LICENSE("GPL v2");

Johan



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux