Hi list, the issue was originally investigated at kernel bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204529 In brief, my laptop has started having issues suspending a few months back. I have eventually managed to produce usable logs: [ 381.200817] PM: suspend entry (deep) [ 381.208037] Filesystems sync: 0.007 seconds [ 381.212775] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 381.215164] OOM killer disabled. [ 381.215172] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 381.216871] wlp4s0: deauthenticating from ac:22:05:e2:26:3a by local choice (Reason: 3=DEAUTH_LEAVING) [ 381.227244] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 381.228008] sd 0:0:0:0: [sda] Stopping disk [ 381.806585] xhci_hcd 0000:02:00.0: WARN: xHC CMD_RUN timeout [ 381.806600] PM: suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 [ 381.806604] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 [ 381.806609] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -110 [ 381.806612] PM: Device 0000:02:00.0 failed to suspend async: error -110 [ 383.877358] PM: Some devices failed to suspend, or early wake event detected [ 383.880034] sd 0:0:0:0: [sda] Starting disk [ 383.900618] jme 0000:03:00.0 enp3s0f0: Link is down [ 384.185026] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 384.185066] ata4: SATA link down (SStatus 0 SControl 300) [ 384.200108] ata3.00: configured for UDMA/133 [ 384.450962] firewire_core 0000:05:00.0: rediscovered device fw0 [ 384.521436] PM: resume devices took 0.644 seconds [ 384.521479] OOM killer enabled. [ 384.521483] Restarting tasks ... done. [ 384.978674] psmouse serio2: synaptics: queried max coordinates: x [..5692], y [..4680] [ 385.416945] video LNXVIDEO:00: Restoring backlight state [ 385.424806] PM: suspend exit With some googling I have managed to eventually tracked the issue down to most likely having started occurring between 5.1.7 and 5.1.8 and to suspect this patch: https://lkml.org/lkml/2019/2/7/1028 Unfortunately the fix for ASMedia https://lkml.org/lkml/2019/9/26/581 which is included in my current kernel 5.3.7-300.fc31.x86_64 does not seem to help for the NEC hub. Would it make sense to increase the timeout even further? Thank you for your help in advance. Best regards, Julian
[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17 [ 0.000000] Linux version 5.3.7-300.fc31.x86_64 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 9.2.1 20190827 (Red Hat 9.2.1-1) (GCC)) #1 SMP Fri Oct 18 19:58:45 UTC 2019 [ 0.000000] Command line: BOOT_IMAGE=(hd0,msdos3)/vmlinuz-5.3.7-300.fc31.x86_64 root=/dev/mapper/vg_snowball2-lv_root ro rd.lvm.lv=vg_snowball2/lv_swap rd.md=0 rd.dm=0 rd.luks=0 rd.lvm.lv=vg_snowball2/lv_root rhgb quiet no_console_suspend [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ced18fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ced19000-0x00000000ced5bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ced5c000-0x00000000cefd0fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cefd1000-0x00000000cf167fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf168000-0x00000000cf3c6fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf3c7000-0x00000000cf567fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf568000-0x00000000cf7e7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf7e8000-0x00000000cf7fffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: CLEVO P150HMx/P150HMx, BIOS 4.6.4 08/09/2011 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2194.920 MHz processor [ 0.002479] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002481] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.002488] last_pfn = 0x32f800 max_arch_pfn = 0x400000000 [ 0.002493] MTRR default type: uncachable [ 0.002493] MTRR fixed ranges enabled: [ 0.002495] 00000-9FFFF write-back [ 0.002496] A0000-BFFFF uncachable [ 0.002496] C0000-CFFFF write-protect [ 0.002497] D0000-E7FFF uncachable [ 0.002498] E8000-FFFFF write-protect [ 0.002499] MTRR variable ranges enabled: [ 0.002500] 0 base 000000000 mask E00000000 write-back [ 0.002502] 1 base 200000000 mask F00000000 write-back [ 0.002503] 2 base 300000000 mask FC0000000 write-back [ 0.002504] 3 base 0D0000000 mask FF0000000 uncachable [ 0.002504] 4 base 0E0000000 mask FE0000000 uncachable [ 0.002505] 5 base 32F800000 mask FFF800000 uncachable [ 0.002506] 6 base 330000000 mask FF0000000 uncachable [ 0.002507] 7 disabled [ 0.002507] 8 disabled [ 0.002508] 9 disabled [ 0.003562] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.003693] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.003699] last_pfn = 0xcf3c7 max_arch_pfn = 0x400000000 [ 0.016627] found SMP MP-table at [mem 0x000fced0-0x000fcedf] [ 0.040712] BRK [0x12f001000, 0x12f001fff] PGTABLE [ 0.040714] BRK [0x12f002000, 0x12f002fff] PGTABLE [ 0.040715] BRK [0x12f003000, 0x12f003fff] PGTABLE [ 0.040775] BRK [0x12f004000, 0x12f004fff] PGTABLE [ 0.040776] BRK [0x12f005000, 0x12f005fff] PGTABLE [ 0.040990] BRK [0x12f006000, 0x12f006fff] PGTABLE [ 0.041003] BRK [0x12f007000, 0x12f007fff] PGTABLE [ 0.041016] BRK [0x12f008000, 0x12f008fff] PGTABLE [ 0.041084] BRK [0x12f009000, 0x12f009fff] PGTABLE [ 0.041168] BRK [0x12f00a000, 0x12f00afff] PGTABLE [ 0.041247] BRK [0x12f00b000, 0x12f00bfff] PGTABLE [ 0.041250] BRK [0x12f00c000, 0x12f00cfff] PGTABLE [ 0.041471] RAMDISK: [mem 0x3441f000-0x36207fff] [ 0.041479] ACPI: Early table checksum verification disabled [ 0.041483] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA) [ 0.041487] ACPI: XSDT 0x00000000CF7EB078 00006C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.041493] ACPI: FACP 0x00000000CF7F2208 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.041499] ACPI: DSDT 0x00000000CF7EB170 007094 (v02 ALASKA A M I 00000014 INTL 20051117) [ 0.041502] ACPI: FACS 0x00000000CF7DFF80 000040 [ 0.041505] ACPI: APIC 0x00000000CF7F2300 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.041508] ACPI: MCFG 0x00000000CF7F2398 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.041512] ACPI: SSDT 0x00000000CF7F23D8 000EA5 (v01 TrmRef PtidDevc 00001000 INTL 20091112) [ 0.041515] ACPI: HPET 0x00000000CF7F3280 000038 (v01 ALASKA A M I 01072009 AMI. 00000004) [ 0.041518] ACPI: SSDT 0x00000000CF7F32B8 00094E (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.041521] ACPI: SSDT 0x00000000CF7F3C08 000996 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.041525] ACPI: DMAR 0x00000000CF7F45A0 0000B0 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.041528] ACPI: SSDT 0x00000000CF7F4650 000E49 (v01 MxmRef MxmOem1 00001000 INTL 20051117) [ 0.041540] ACPI: Local APIC address 0xfee00000 [ 0.041634] No NUMA configuration found [ 0.041635] Faking a node at [mem 0x0000000000000000-0x000000032f7fffff] [ 0.041647] NODE_DATA(0) allocated [mem 0x32f7cd000-0x32f7f7fff] [ 0.065964] Zone ranges: [ 0.065966] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.065968] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.065969] Normal [mem 0x0000000100000000-0x000000032f7fffff] [ 0.065970] Device empty [ 0.065971] Movable zone start for each node [ 0.065975] Early memory node ranges [ 0.065976] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.065977] node 0: [mem 0x0000000000100000-0x00000000ced18fff] [ 0.065978] node 0: [mem 0x00000000ced5c000-0x00000000cefd0fff] [ 0.065979] node 0: [mem 0x00000000cf168000-0x00000000cf3c6fff] [ 0.065980] node 0: [mem 0x0000000100000000-0x000000032f7fffff] [ 0.066029] Zeroed struct page in unavailable ranges: 3703 pages [ 0.066031] Initmem setup node 0 [mem 0x0000000000001000-0x000000032f7fffff] [ 0.066033] On node 0 totalpages: 3139977 [ 0.066034] DMA zone: 64 pages used for memmap [ 0.066034] DMA zone: 21 pages reserved [ 0.066035] DMA zone: 3996 pages, LIFO batch:0 [ 0.066098] DMA32 zone: 13192 pages used for memmap [ 0.066099] DMA32 zone: 844269 pages, LIFO batch:63 [ 0.079464] Normal zone: 35808 pages used for memmap [ 0.079466] Normal zone: 2291712 pages, LIFO batch:63 [ 0.112556] ACPI: PM-Timer IO Port: 0x408 [ 0.112559] ACPI: Local APIC address 0xfee00000 [ 0.112568] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.112579] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.112581] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.112583] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.112585] ACPI: IRQ0 used by override. [ 0.112586] ACPI: IRQ9 used by override. [ 0.112588] Using ACPI (MADT) for SMP configuration information [ 0.112589] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.112595] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.112617] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.112619] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.112619] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.112620] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.112621] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.112623] PM: Registered nosave memory: [mem 0xced19000-0xced5bfff] [ 0.112624] PM: Registered nosave memory: [mem 0xcefd1000-0xcf167fff] [ 0.112626] PM: Registered nosave memory: [mem 0xcf3c7000-0xcf567fff] [ 0.112627] PM: Registered nosave memory: [mem 0xcf568000-0xcf7e7fff] [ 0.112628] PM: Registered nosave memory: [mem 0xcf7e8000-0xcf7fffff] [ 0.112628] PM: Registered nosave memory: [mem 0xcf800000-0xf7ffffff] [ 0.112629] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.112629] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.112630] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.112631] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.112631] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.112632] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.112633] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.112633] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.112634] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.112635] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.112635] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.112637] [mem 0xcf800000-0xf7ffffff] available for PCI devices [ 0.112638] Booting paravirtualized kernel on bare hardware [ 0.112642] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.254018] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.254286] percpu: Embedded 52 pages/cpu s176128 r8192 d28672 u262144 [ 0.254295] pcpu-alloc: s176128 r8192 d28672 u262144 alloc=1*2097152 [ 0.254296] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.254332] Built 1 zonelists, mobility grouping on. Total pages: 3090892 [ 0.254332] Policy zone: Normal [ 0.254334] Kernel command line: BOOT_IMAGE=(hd0,msdos3)/vmlinuz-5.3.7-300.fc31.x86_64 root=/dev/mapper/vg_snowball2-lv_root ro rd.lvm.lv=vg_snowball2/lv_swap rd.md=0 rd.dm=0 rd.luks=0 rd.lvm.lv=vg_snowball2/lv_root rhgb quiet no_console_suspend [ 0.255564] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.256073] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.256186] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.297566] Memory: 12207120K/12559908K available (12291K kernel code, 1541K rwdata, 4564K rodata, 2272K init, 4468K bss, 352788K reserved, 0K cma-reserved) [ 0.297574] random: get_random_u64 called from __kmem_cache_create+0x3e/0x520 with crng_init=0 [ 0.297720] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.297733] Kernel/User page tables isolation: enabled [ 0.297751] ftrace: allocating 40062 entries in 157 pages [ 0.315942] rcu: Hierarchical RCU implementation. [ 0.315944] rcu: RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=8. [ 0.315945] Tasks RCU enabled. [ 0.315946] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.315946] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.319434] NR_IRQS: 65792, nr_irqs: 488, preallocated irqs: 16 [ 0.324250] Console: colour VGA+ 80x25 [ 0.324255] printk: console [tty0] enabled [ 0.324272] ACPI: Core revision 20190703 [ 0.324376] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.324389] APIC: Switch to symmetric I/O mode setup [ 0.324390] DMAR: Host address width 36 [ 0.324392] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.324397] DMAR: dmar0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.324398] DMAR: RMRR base: 0x000000cf543000 end: 0x000000cf551fff [ 0.324400] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0 [ 0.324401] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.324401] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.324646] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.324648] x2apic enabled [ 0.324653] Switched APIC routing to cluster x2apic. [ 0.325072] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.329390] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa373f688b, max_idle_ns: 440795233648 ns [ 0.329394] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.84 BogoMIPS (lpj=2194920) [ 0.329397] pid_max: default: 32768 minimum: 301 [ 0.329429] LSM: Security Framework initializing [ 0.329439] Yama: becoming mindful. [ 0.329448] SELinux: Initializing. [ 0.329467] *** VALIDATE SELinux *** [ 0.329513] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.329542] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.329718] *** VALIDATE proc *** [ 0.329775] *** VALIDATE cgroup1 *** [ 0.329776] *** VALIDATE cgroup2 *** [ 0.329828] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.329843] process: using mwait in idle threads [ 0.329846] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.329847] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.329849] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.329851] Spectre V2 : Mitigation: Full generic retpoline [ 0.329852] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.329852] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.329854] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.329855] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.329856] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.329859] MDS: Mitigation: Clear CPU buffers [ 0.330029] Freeing SMP alternatives memory: 36K [ 0.331478] TSC deadline timer enabled [ 0.331481] smpboot: CPU0: Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.331593] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.331600] ... version: 3 [ 0.331601] ... bit width: 48 [ 0.331601] ... generic registers: 4 [ 0.331602] ... value mask: 0000ffffffffffff [ 0.331603] ... max period: 00007fffffffffff [ 0.331603] ... fixed-purpose events: 3 [ 0.331604] ... event mask: 000000070000000f [ 0.331646] rcu: Hierarchical SRCU implementation. [ 0.332583] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.332675] smp: Bringing up secondary CPUs ... [ 0.332777] x86: Booting SMP configuration: [ 0.332778] .... node #0, CPUs: #1 #2 #3 #4 [ 0.339501] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.339547] #5 #6 #7 [ 0.342453] smp: Brought up 1 node, 8 CPUs [ 0.342453] smpboot: Max logical packages: 1 [ 0.342453] smpboot: Total of 8 processors activated (35118.72 BogoMIPS) [ 0.343856] devtmpfs: initialized [ 0.343856] x86/mm: Memory block size: 128MB [ 0.345474] PM: Registering ACPI NVS region [mem 0xced19000-0xced5bfff] (274432 bytes) [ 0.345478] PM: Registering ACPI NVS region [mem 0xcf568000-0xcf7e7fff] (2621440 bytes) [ 0.345586] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.345586] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.345586] pinctrl core: initialized pinctrl subsystem [ 0.345598] PM: RTC time: 13:00:55, date: 2019-10-20 [ 0.345739] NET: Registered protocol family 16 [ 0.345893] audit: initializing netlink subsys (disabled) [ 0.345902] audit: type=2000 audit(1571576455.021:1): state=initialized audit_enabled=0 res=1 [ 0.345902] cpuidle: using governor menu [ 0.345902] ACPI: bus type PCI registered [ 0.345902] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.346431] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.346434] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.346442] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.346542] PCI: Using configuration type 1 for base access [ 0.346625] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.347255] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.349101] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.567698] cryptd: max_cpu_qlen set to 1000 [ 0.569637] alg: No test for lzo-rle (lzo-rle-generic) [ 0.569637] alg: No test for lzo-rle (lzo-rle-scomp) [ 0.569637] alg: No test for 842 (842-generic) [ 0.569637] alg: No test for 842 (842-scomp) [ 0.573631] ACPI: Added _OSI(Module Device) [ 0.573631] ACPI: Added _OSI(Processor Device) [ 0.573631] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.573631] ACPI: Added _OSI(Processor Aggregator Device) [ 0.573631] ACPI: Added _OSI(Linux-Dell-Video) [ 0.573631] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.573631] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.578421] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.579427] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.579818] ACPI: Dynamic OEM Table Load: [ 0.579824] ACPI: SSDT 0xFFFF8A9B60E0E000 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.581488] ACPI: Dynamic OEM Table Load: [ 0.581494] ACPI: SSDT 0xFFFF8A9B60F21000 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.581971] ACPI: Dynamic OEM Table Load: [ 0.581971] ACPI: SSDT 0xFFFF8A9B60AF4000 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.583735] ACPI: EC: EC started [ 0.583736] ACPI: EC: interrupt blocked [ 1.420512] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC [ 1.420514] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.420515] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions [ 1.420516] ACPI: Interpreter enabled [ 1.420543] ACPI: (supports S0 S1 S3 S4 S5) [ 1.420545] ACPI: Using IOAPIC for interrupt routing [ 1.420577] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.420792] ACPI: Enabled 17 GPEs in block 00 to 3F [ 1.429342] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 1.429348] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.429384] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 1.429807] PCI host bridge to bus 0000:00 [ 1.429810] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.429812] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.429813] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.429814] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 1.429815] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 1.429817] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 1.429818] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 1.429819] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 1.429820] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 1.429821] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff window] [ 1.429823] pci_bus 0000:00: root bus resource [bus 00-3e] [ 1.429833] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 1.429940] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 1.429984] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.430101] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 1.430127] pci 0000:00:16.0: reg 0x10: [mem 0xf750a000-0xf750a00f 64bit] [ 1.430204] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.430301] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 1.430324] pci 0000:00:1a.0: reg 0x10: [mem 0xf7508000-0xf75083ff] [ 1.430411] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.430506] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 1.430528] pci 0000:00:1b.0: reg 0x10: [mem 0xf7500000-0xf7503fff 64bit] [ 1.430605] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.430696] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 1.430795] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.430894] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 1.430992] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.431091] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 1.431188] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 1.431287] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 1.431384] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.431488] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 1.431510] pci 0000:00:1d.0: reg 0x10: [mem 0xf7507000-0xf75073ff] [ 1.431597] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.431689] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 1.431878] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 1.431896] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 1.431903] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 1.431911] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 1.431918] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 1.431925] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 1.431933] pci 0000:00:1f.2: reg 0x24: [mem 0xf7506000-0xf75067ff] [ 1.431975] pci 0000:00:1f.2: PME# supported from D3hot [ 1.432058] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 1.432077] pci 0000:00:1f.3: reg 0x10: [mem 0xf7505000-0xf75050ff 64bit] [ 1.432097] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 1.432237] pci 0000:01:00.0: [10de:11a0] type 00 class 0x030000 [ 1.432256] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 1.432266] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 1.432277] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 1.432284] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 1.432291] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 1.432297] pci 0000:01:00.0: enabling Extended Tags [ 1.432367] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x8 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link) [ 1.432463] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300 [ 1.432479] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff] [ 1.432520] pci 0000:01:00.1: enabling Extended Tags [ 1.432616] pci 0000:00:01.0: ASPM: current common clock configuration is broken, reconfiguring [ 1.435433] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.435439] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 1.435445] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 1.435453] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 1.435558] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330 [ 1.435599] pci 0000:02:00.0: reg 0x10: [mem 0xf7400000-0xf7401fff 64bit] [ 1.435762] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.435895] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 1.435901] pci 0000:00:1c.0: bridge window [mem 0xf7400000-0xf74fffff] [ 1.436007] pci 0000:03:00.0: [197b:0250] type 00 class 0x020000 [ 1.436043] pci 0000:03:00.0: reg 0x10: [mem 0xf7320000-0xf7323fff] [ 1.436074] pci 0000:03:00.0: reg 0x18: [io 0xd100-0xd17f] [ 1.436090] pci 0000:03:00.0: reg 0x1c: [io 0xd000-0xd0ff] [ 1.436105] pci 0000:03:00.0: reg 0x20: [mem 0xf7310000-0xf731ffff] [ 1.436136] pci 0000:03:00.0: reg 0x30: [mem 0xf7300000-0xf730ffff pref] [ 1.436233] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 1.436345] pci 0000:03:00.1: [197b:2392] type 00 class 0x088000 [ 1.436381] pci 0000:03:00.1: reg 0x10: [mem 0xf7326000-0xf73260ff] [ 1.436642] pci 0000:03:00.2: [197b:2391] type 00 class 0x080501 [ 1.436679] pci 0000:03:00.2: reg 0x10: [mem 0xf7325000-0xf73250ff] [ 1.436938] pci 0000:03:00.3: [197b:2393] type 00 class 0x088000 [ 1.436974] pci 0000:03:00.3: reg 0x10: [mem 0xf7324000-0xf73240ff] [ 1.437273] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 1.437276] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 1.437279] pci 0000:00:1c.1: bridge window [mem 0xf7300000-0xf73fffff] [ 1.437371] pci 0000:04:00.0: [8086:08b1] type 00 class 0x028000 [ 1.437456] pci 0000:04:00.0: reg 0x10: [mem 0xf7200000-0xf7201fff 64bit] [ 1.437715] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 1.437936] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 1.437941] pci 0000:00:1c.2: bridge window [mem 0xf7200000-0xf72fffff] [ 1.438023] pci 0000:05:00.0: [197b:2380] type 00 class 0x0c0010 [ 1.438064] pci 0000:05:00.0: reg 0x10: [mem 0xf7103000-0xf71037ff] [ 1.438083] pci 0000:05:00.0: reg 0x14: [mem 0xf7102000-0xf710207f] [ 1.438135] pci 0000:05:00.0: reg 0x20: [mem 0xf7101000-0xf710107f] [ 1.438154] pci 0000:05:00.0: reg 0x24: [mem 0xf7100000-0xf710007f] [ 1.438387] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 1.438391] pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff] [ 1.438833] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.438887] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.438937] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15) [ 1.438986] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.439036] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.439086] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.439135] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15) [ 1.439185] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.440396] ACPI: EC: interrupt unblocked [ 1.440396] ACPI: EC: event unblocked [ 1.440396] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.440396] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events [ 1.440421] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 1.440421] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.440421] pci 0000:01:00.0: vgaarb: bridge control possible [ 1.440421] vgaarb: loaded [ 1.440518] SCSI subsystem initialized [ 1.440533] libata version 3.00 loaded. [ 1.440533] ACPI: bus type USB registered [ 1.440533] usbcore: registered new interface driver usbfs [ 1.440533] usbcore: registered new interface driver hub [ 1.440533] usbcore: registered new device driver usb [ 1.440533] pps_core: LinuxPPS API ver. 1 registered [ 1.440533] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 1.440533] PTP clock support registered [ 1.440533] EDAC MC: Ver: 3.0.0 [ 1.441421] PCI: Using ACPI for IRQ routing [ 1.442610] PCI: pci_cache_line_size set to 64 bytes [ 1.442699] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 1.442701] e820: reserve RAM buffer [mem 0xced19000-0xcfffffff] [ 1.442702] e820: reserve RAM buffer [mem 0xcefd1000-0xcfffffff] [ 1.442703] e820: reserve RAM buffer [mem 0xcf3c7000-0xcfffffff] [ 1.442705] e820: reserve RAM buffer [mem 0x32f800000-0x32fffffff] [ 1.442830] NetLabel: Initializing [ 1.442830] NetLabel: domain hash size = 128 [ 1.442831] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.442849] NetLabel: unlabeled traffic allowed by default [ 1.442854] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.442854] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.444417] clocksource: Switched to clocksource tsc-early [ 1.460281] VFS: Disk quotas dquot_6.6.0 [ 1.460300] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.460331] *** VALIDATE hugetlbfs *** [ 1.460364] pnp: PnP ACPI init [ 1.460493] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 1.460499] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.460600] system 00:01: [io 0x0680-0x069f] has been reserved [ 1.460602] system 00:01: [io 0x1000-0x100f] has been reserved [ 1.460603] system 00:01: [io 0xffff] has been reserved [ 1.460605] system 00:01: [io 0xffff] has been reserved [ 1.460606] system 00:01: [io 0x0400-0x0453] has been reserved [ 1.460608] system 00:01: [io 0x0458-0x047f] has been reserved [ 1.460609] system 00:01: [io 0x0500-0x057f] has been reserved [ 1.460611] system 00:01: [io 0x164e-0x164f] has been reserved [ 1.460615] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.460640] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.460697] system 00:03: [io 0x0454-0x0457] has been reserved [ 1.460701] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.460759] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 1.460763] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.460800] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 1.460844] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 PNP0f03 (active) [ 1.461059] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.461060] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.461062] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.461063] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.461067] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 1.461069] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.461070] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 1.461072] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.461073] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 1.461075] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.461077] system 00:07: [mem 0xd0000000-0xd0000fff] has been reserved [ 1.461081] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.462191] pnp: PnP ACPI: found 8 devices [ 1.463747] thermal_sys: Registered thermal governor 'fair_share' [ 1.463748] thermal_sys: Registered thermal governor 'bang_bang' [ 1.463749] thermal_sys: Registered thermal governor 'step_wise' [ 1.463750] thermal_sys: Registered thermal governor 'user_space' [ 1.468277] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.468346] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.468349] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 1.468352] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 1.468355] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 1.468358] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 1.468362] pci 0000:00:1c.0: bridge window [mem 0xf7400000-0xf74fffff] [ 1.468371] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 1.468373] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 1.468377] pci 0000:00:1c.1: bridge window [mem 0xf7300000-0xf73fffff] [ 1.468385] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 1.468389] pci 0000:00:1c.2: bridge window [mem 0xf7200000-0xf72fffff] [ 1.468401] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 1.468405] pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf71fffff] [ 1.468414] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.468416] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.468417] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.468418] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 1.468419] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 1.468421] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 1.468422] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 1.468423] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 1.468424] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 1.468426] pci_bus 0000:00: resource 13 [mem 0xd0000000-0xfeafffff window] [ 1.468427] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 1.468428] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] [ 1.468429] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] [ 1.468431] pci_bus 0000:02: resource 1 [mem 0xf7400000-0xf74fffff] [ 1.468432] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 1.468433] pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff] [ 1.468435] pci_bus 0000:04: resource 1 [mem 0xf7200000-0xf72fffff] [ 1.468436] pci_bus 0000:05: resource 1 [mem 0xf7100000-0xf71fffff] [ 1.468534] NET: Registered protocol family 2 [ 1.468742] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 1.468773] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.468980] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.469111] TCP: Hash tables configured (established 131072 bind 65536) [ 1.469149] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 1.469194] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 1.469292] NET: Registered protocol family 1 [ 1.469298] NET: Registered protocol family 44 [ 1.469749] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.469761] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 1.469993] PCI: CLS 64 bytes, default 64 [ 1.470043] Trying to unpack rootfs image as initramfs... [ 2.013240] Freeing initrd memory: 30628K [ 2.017455] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.017460] software IO TLB: mapped [mem 0xcad19000-0xced19000] (64MB) [ 2.020515] Initialise system trusted keyrings [ 2.020527] Key type blacklist registered [ 2.020561] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 2.022250] zbud: loaded [ 2.022917] Platform Keyring initialized [ 2.029320] NET: Registered protocol family 38 [ 2.029322] Key type asymmetric registered [ 2.029323] Asymmetric key parser 'x509' registered [ 2.029332] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 2.029376] io scheduler mq-deadline registered [ 2.029377] io scheduler kyber registered [ 2.029411] io scheduler bfq registered [ 2.029495] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 2.030371] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.030403] intel_idle: MWAIT substates: 0x21120 [ 2.030404] intel_idle: v0.4.1 model 0x2A [ 2.030830] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.032323] ACPI: AC Adapter [ADP0] (on-line) [ 2.032403] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 2.032420] ACPI: Lid Switch [LID0] [ 2.032461] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 2.032474] ACPI: Sleep Button [SLPB] [ 2.032505] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 2.032512] ACPI: Power Button [PWRB] [ 2.032545] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 2.032551] ACPI: Power Button [PWRF] [ 3.044503] tsc: Refined TSC clocksource calibration: 2195.012 MHz [ 3.044529] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cab9042, max_idle_ns: 440795210298 ns [ 3.044580] clocksource: Switched to clocksource tsc [ 4.532582] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.532584] ACPI: Thermal Zone [THM0] (56 C) [ 4.532877] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 4.543406] Non-volatile memory driver v1.3 [ 4.543509] Linux agpgart interface v0.103 [ 4.544472] ahci 0000:00:1f.2: version 3.0 [ 4.544783] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 4.548712] battery: ACPI: Battery Slot [BAT0] (battery present) [ 4.554901] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode [ 4.554909] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 4.561154] scsi host0: ahci [ 4.561534] scsi host1: ahci [ 4.561899] scsi host2: ahci [ 4.562122] scsi host3: ahci [ 4.562218] scsi host4: ahci [ 4.562556] scsi host5: ahci [ 4.562616] ata1: SATA max UDMA/133 abar m2048@0xf7506000 port 0xf7506100 irq 30 [ 4.562617] ata2: DUMMY [ 4.562619] ata3: SATA max UDMA/133 abar m2048@0xf7506000 port 0xf7506200 irq 30 [ 4.562620] ata4: SATA max UDMA/133 abar m2048@0xf7506000 port 0xf7506280 irq 30 [ 4.562621] ata5: DUMMY [ 4.562622] ata6: DUMMY [ 4.562732] libphy: Fixed MDIO Bus: probed [ 4.562865] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.562871] ehci-pci: EHCI PCI platform driver [ 4.563032] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 4.563077] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 4.563089] ehci-pci 0000:00:1a.0: debug port 2 [ 4.566987] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 4.567003] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7508000 [ 4.573503] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 4.573598] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 4.573600] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.573601] usb usb1: Product: EHCI Host Controller [ 4.573602] usb usb1: Manufacturer: Linux 5.3.7-300.fc31.x86_64 ehci_hcd [ 4.573604] usb usb1: SerialNumber: 0000:00:1a.0 [ 4.573852] hub 1-0:1.0: USB hub found [ 4.573862] hub 1-0:1.0: 2 ports detected [ 4.574159] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 4.574326] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 4.574339] ehci-pci 0000:00:1d.0: debug port 2 [ 4.578248] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 4.578269] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7507000 [ 4.584515] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 4.584594] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 4.584596] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.584597] usb usb2: Product: EHCI Host Controller [ 4.584599] usb usb2: Manufacturer: Linux 5.3.7-300.fc31.x86_64 ehci_hcd [ 4.584600] usb usb2: SerialNumber: 0000:00:1d.0 [ 4.584838] hub 2-0:1.0: USB hub found [ 4.584847] hub 2-0:1.0: 2 ports detected [ 4.584992] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.584998] ohci-pci: OHCI PCI platform driver [ 4.585010] uhci_hcd: USB Universal Host Controller Interface driver [ 4.585136] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 4.585307] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 [ 4.585439] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004 [ 4.585778] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 4.585779] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.585781] usb usb3: Product: xHCI Host Controller [ 4.585782] usb usb3: Manufacturer: Linux 5.3.7-300.fc31.x86_64 xhci-hcd [ 4.585783] usb usb3: SerialNumber: 0000:02:00.0 [ 4.586000] hub 3-0:1.0: USB hub found [ 4.586011] hub 3-0:1.0: 2 ports detected [ 4.586121] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 4.586261] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 [ 4.586265] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 4.588802] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.588825] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 4.588827] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.588828] usb usb4: Product: xHCI Host Controller [ 4.588830] usb usb4: Manufacturer: Linux 5.3.7-300.fc31.x86_64 xhci-hcd [ 4.588831] usb usb4: SerialNumber: 0000:02:00.0 [ 4.588972] hub 4-0:1.0: USB hub found [ 4.588984] hub 4-0:1.0: 2 ports detected [ 4.589129] usbcore: registered new interface driver usbserial_generic [ 4.589134] usbserial: USB Serial support registered for generic [ 4.589169] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 4.594415] i8042: Detected active multiplexing controller, rev 1.1 [ 4.596995] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.596999] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 4.597027] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 4.597048] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 4.597069] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 4.597192] mousedev: PS/2 mouse device common for all mice [ 4.597553] rtc_cmos 00:02: registered as rtc0 [ 4.597554] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 4.597606] device-mapper: uevent: version 1.0.3 [ 4.597702] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@xxxxxxxxxx [ 4.597829] intel_pstate: Intel P-state driver initializing [ 4.598964] hidraw: raw HID events driver (C) Jiri Kosina [ 4.599064] usbcore: registered new interface driver usbhid [ 4.599065] usbhid: USB HID core driver [ 4.599300] drop_monitor: Initializing network drop monitor service [ 4.599529] Initializing XFRM netlink socket [ 4.599883] NET: Registered protocol family 10 [ 4.601104] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 4.613490] Segment Routing with IPv6 [ 4.613551] mip6: Mobile IPv6 [ 4.613556] NET: Registered protocol family 17 [ 4.615567] RAS: Correctable Errors collector initialized. [ 4.615656] microcode: sig=0x206a7, pf=0x10, revision=0x2f [ 4.615907] microcode: Microcode Update Driver: v2.2. [ 4.615915] AVX version of gcm_enc/dec engaged. [ 4.615915] AES CTR mode by8 optimization enabled [ 4.704265] sched_clock: Marking stable (4699459775, 4764946)->(4962989282, -258764561) [ 4.705314] registered taskstats version 1 [ 4.705347] Loading compiled-in X.509 certificates [ 4.747798] Loaded X.509 cert 'Fedora kernel signing key: 24e9842fc5b0b51787c38cc7d9f37bf1a8a9a778' [ 4.747878] zswap: loaded using pool lzo/zbud [ 4.761192] Key type big_key registered [ 4.769443] Key type encrypted registered [ 4.769474] ima: No TPM chip found, activating TPM-bypass! [ 4.769503] ima: Allocated hash algorithm: sha256 [ 4.769528] No architecture policies found [ 4.770439] PM: Magic number: 7:866:28 [ 4.770566] memory memory68: hash matches [ 4.770687] rtc_cmos 00:02: setting system clock to 2019-10-20T13:01:00 UTC (1571576460) [ 4.874877] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.876510] ata1.00: supports DRM functions and may not be fully accessible [ 4.877426] ata1.00: disabling queued TRIM support [ 4.877431] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133 [ 4.877435] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 4.878963] ata1.00: supports DRM functions and may not be fully accessible [ 4.879768] ata1.00: disabling queued TRIM support [ 4.880965] ata1.00: configured for UDMA/133 [ 4.891768] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 4.892579] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.892683] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 4.892710] sd 0:0:0:0: [sda] Write Protect is off [ 4.892715] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.892753] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.894270] sda: sda1 sda2 sda3 sda4 < sda5 > [ 4.894447] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.896415] sd 0:0:0:0: [sda] supports TCG Opal [ 4.896420] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.912458] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.095076] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.095082] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.095166] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.095167] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.095648] hub 2-1:1.0: USB hub found [ 5.095682] hub 1-1:1.0: USB hub found [ 5.095869] hub 2-1:1.0: 6 ports detected [ 5.095898] hub 1-1:1.0: 6 ports detected [ 5.202457] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.213515] ata3.00: ATAPI: HL-DT-ST BDDVDRW CT30N, WM01, max UDMA/133 [ 5.217664] ata3.00: configured for UDMA/133 [ 5.221231] scsi 2:0:0:0: CD-ROM HL-DT-ST BDDVDRW CT30N WM01 PQ: 0 ANSI: 5 [ 5.352447] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.352453] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.353143] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 5.353456] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 5.442252] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 5.578451] usb 2-1.5: New USB device found, idVendor=147e, idProduct=1001, bcdDevice= 0.43 [ 5.578467] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.578470] usb 2-1.5: Product: Fingerprint Sensor [ 5.578472] usb 2-1.5: Manufacturer: TouchStrip [ 5.658376] ata4: SATA link down (SStatus 0 SControl 300) [ 5.682261] Freeing unused decrypted memory: 2040K [ 5.682615] Freeing unused kernel image memory: 2272K [ 5.682686] Write protecting the kernel read-only data: 20480k [ 5.683226] Freeing unused kernel image memory: 2016K [ 5.683589] Freeing unused kernel image memory: 1580K [ 5.692780] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 5.692785] rodata_test: all tests were successful [ 5.692787] x86/mm: Checking user space page tables [ 5.701288] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 5.701291] Run /init as init process [ 5.710261] systemd[1]: systemd v243-3.gitef67743.fc31 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 5.722556] systemd[1]: Detected architecture x86-64. [ 5.722561] systemd[1]: Running in initial RAM disk. [ 5.722611] systemd[1]: Set hostname to <snowball2>. [ 5.922107] random: systemd: uninitialized urandom read (16 bytes read) [ 5.922119] systemd[1]: Reached target Local File Systems. [ 5.922163] random: systemd: uninitialized urandom read (16 bytes read) [ 5.922170] systemd[1]: Reached target Slices. [ 5.922182] random: systemd: uninitialized urandom read (16 bytes read) [ 5.922188] systemd[1]: Reached target Swap. [ 5.922202] systemd[1]: Reached target Timers. [ 5.922333] systemd[1]: Listening on Journal Audit Socket. [ 5.922444] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.944743] fuse: init (API version 7.31) [ 5.954330] psmouse serio2: synaptics: queried max coordinates: x [..5692], y [..4680] [ 6.104429] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762 [ 6.145967] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10 [ 6.173391] audit: type=1130 audit(1571576461.901:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 6.182206] audit: type=1130 audit(1571576461.910:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 6.274359] audit: type=1130 audit(1571576462.002:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 6.368770] video: probe of PNP0A08:00 failed with error -22 [ 6.368811] [Firmware Bug]: ACPI(MXM3) defines _DOD but not _DOS [ 6.369012] ACPI: Video Device [MXM3] (multi-head: yes rom: no post: no) [ 6.371325] acpi device:1a: registered as cooling_device8 [ 6.371380] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/LNXVIDEO:00/input/input13 [ 6.375368] audit: type=1130 audit(1571576462.103:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 6.393662] audit: type=1130 audit(1571576462.122:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 6.425020] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 6.425045] jme 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 6.426032] sdhci: Secure Digital Host Controller Interface driver [ 6.426033] sdhci: Copyright(c) Pierre Ossman [ 6.426393] jme 0000:03:00.0 eth0: JMC250 Gigabit Ethernet chiprev:35 pcirev:5 macaddr:00:90:f5:b9:39:74 [ 6.434788] sdhci-pci 0000:03:00.1: SDHCI controller found [197b:2392] (rev 90) [ 6.434925] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes [ 6.438547] mmc0: SDHCI controller on PCI [0000:03:00.1] using DMA [ 6.438592] sdhci-pci 0000:03:00.2: SDHCI controller found [197b:2391] (rev 90) [ 6.438700] sdhci-pci 0000:03:00.2: Refusing to bind to secondary interface. [ 6.442908] random: fast init done [ 6.467909] jme 0000:03:00.0 enp3s0f0: renamed from eth0 [ 6.477459] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10 [ 6.609349] ACPI Warning: \_SB.PCI0.PEG0.MXM3._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190703/nsarguments-59) [ 6.609379] ACPI: \_SB_.PCI0.PEG0.MXM3: failed to evaluate _DSM [ 6.609581] nouveau 0000:01:00.0: NVIDIA GK104 (0e4200a2) [ 6.666124] nouveau 0000:01:00.0: bios: version 80.04.29.00.01 [ 6.666305] nouveau 0000:01:00.0: mxm: BIOS version 3.0 [ 6.667439] nouveau 0000:01:00.0: fb: 4096 MiB GDDR5 [ 6.730707] [TTM] Zone kernel: Available graphics memory: 6122846 KiB [ 6.730709] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 6.730710] [TTM] Initializing pool allocator [ 6.730720] [TTM] Initializing DMA pool allocator [ 6.730741] nouveau 0000:01:00.0: DRM: VRAM: 4096 MiB [ 6.730743] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 6.730746] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 6.730748] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 6.730750] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f13 00010034 [ 6.730752] nouveau 0000:01:00.0: DRM: DCB outp 07: 08013f82 00020030 [ 6.730754] nouveau 0000:01:00.0: DRM: DCB outp 08: 04038fb6 0f420014 [ 6.730756] nouveau 0000:01:00.0: DRM: DCB outp 11: 02027f62 00020010 [ 6.730758] nouveau 0000:01:00.0: DRM: DCB outp 13: 02049f80 00000000 [ 6.730760] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000040 [ 6.730761] nouveau 0000:01:00.0: DRM: DCB conn 01: 00001161 [ 6.730762] nouveau 0000:01:00.0: DRM: DCB conn 02: 00001231 [ 6.730764] nouveau 0000:01:00.0: DRM: DCB conn 03: 01000331 [ 6.730765] nouveau 0000:01:00.0: DRM: DCB conn 04: 01000446 [ 6.730766] nouveau 0000:01:00.0: DRM: DCB conn 05: 02000546 [ 6.730768] nouveau 0000:01:00.0: DRM: DCB conn 06: 00010631 [ 6.730769] nouveau 0000:01:00.0: DRM: DCB conn 07: 00010761 [ 6.730771] nouveau 0000:01:00.0: DRM: DCB conn 08: 00020847 [ 6.730772] nouveau 0000:01:00.0: DRM: DCB conn 09: 00000900 [ 6.733506] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 6.980870] firewire_core 0000:05:00.0: created device fw0: GUID ea9439b9f5900058, S400 [ 7.037822] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.037824] [drm] Driver supports precise vblank timestamp query. [ 7.140811] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0xa0000, bo (____ptrval____) [ 7.140946] fbcon: nouveaudrmfb (fb0) is primary device [ 7.929179] Console: switching to colour frame buffer device 240x67 [ 7.930095] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device [ 7.935999] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 8.000985] jme 0000:03:00.0 enp3s0f0: Link is down [ 14.353779] audit: type=1130 audit(1571576470.082:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 14.505004] audit: type=1130 audit(1571576470.233:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 14.518907] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 14.705068] audit: type=1130 audit(1571576470.433:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 14.705074] audit: type=1131 audit(1571576470.433:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 14.777978] audit: type=1130 audit(1571576470.506:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 14.794049] audit: type=1131 audit(1571576470.522:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 14.796943] audit: type=1131 audit(1571576470.525:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 14.799172] audit: type=1131 audit(1571576470.527:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 14.800003] audit: type=1131 audit(1571576470.528:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 14.800996] audit: type=1131 audit(1571576470.529:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 14.863328] systemd-journald[322]: Received SIGTERM from PID 1 (systemd). [ 14.891292] printk: systemd: 23 output lines suppressed due to ratelimiting [ 15.416922] SELinux: policy capability network_peer_controls=1 [ 15.416923] SELinux: policy capability open_perms=1 [ 15.416924] SELinux: policy capability extended_socket_class=1 [ 15.416924] SELinux: policy capability always_check_network=0 [ 15.416924] SELinux: policy capability cgroup_seclabel=1 [ 15.416925] SELinux: policy capability nnp_nosuid_transition=1 [ 15.445658] systemd[1]: Successfully loaded SELinux policy in 461.405ms. [ 15.456745] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time. [ 15.508560] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 29.137ms. [ 15.510996] systemd[1]: systemd v243-3.gitef67743.fc31 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 15.522732] systemd[1]: Detected architecture x86-64. [ 15.523307] systemd[1]: Set hostname to <snowball2>. [ 15.728432] systemd[1]: /usr/lib/systemd/system/sssd.service:12: PIDFile= references a path below legacy directory /var/run/, updating /var/run/sssd.pid → /run/sssd.pid; please update the unit file accordingly. [ 15.744065] systemd[1]: /usr/lib/systemd/system/acpid.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/acpid.socket → /run/acpid.socket; please update the unit file accordingly. [ 15.771534] systemd[1]: /usr/lib/systemd/system/pcscd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly. [ 15.772761] systemd[1]: /usr/lib/systemd/system/iscsiuio.service:13: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsiuio.pid → /run/iscsiuio.pid; please update the unit file accordingly. [ 15.773079] systemd[1]: /usr/lib/systemd/system/iscsid.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsid.pid → /run/iscsid.pid; please update the unit file accordingly. [ 15.773572] systemd[1]: /usr/lib/systemd/system/cups.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/cups/cups.sock → /run/cups/cups.sock; please update the unit file accordingly. [ 15.821190] systemd[1]: initrd-switch-root.service: Succeeded. [ 15.858413] Adding 6193148k swap on /dev/mapper/vg_snowball2-lv_swap. Priority:-2 extents:1 across:6193148k SSFS [ 15.868605] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 16.070837] systemd-journald[687]: File /run/log/journal/8be85244e4ccefd602ced279da6f6b15/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 16.082131] systemd-journald[687]: Received client request to flush runtime journal. [ 16.088007] systemd-journald[687]: File /var/log/journal/8be85244e4ccefd602ced279da6f6b15/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 16.394710] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190703/utaddress-204) [ 16.394716] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 16.394719] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204) [ 16.394722] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 16.394723] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204) [ 16.394725] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 16.394725] ACPI Warning: [ 16.394727] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 16.394727] SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-204) [ 16.394729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 16.394729] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 16.478135] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer [ 16.478137] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 16.478138] RAPL PMU: hw unit of domain package 2^-16 Joules [ 16.545098] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 16.546060] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 16.577101] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 16.582870] iTCO_vendor_support: vendor-support=0 [ 16.585356] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 16.585419] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 16.585800] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 16.625926] Intel(R) Wireless WiFi driver for Linux [ 16.625927] Copyright(c) 2003- 2015 Intel Corporation [ 16.630696] iwlwifi 0000:04:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm [ 16.651133] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 16.720024] random: crng init done [ 16.720026] random: 7 urandom warning(s) missed due to ratelimiting [ 16.757847] snd_hda_intel 0000:01:00.1: Disabling MSI [ 16.757855] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 16.798461] snd_hda_codec_realtek hdaudioC0D0: ALC892: SKU not ready 0x598301f0 [ 16.798880] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 16.798882] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 16.798884] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 16.798885] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 16.798887] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 16.798888] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 16.798890] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19 [ 16.798892] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 16.798894] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 16.812436] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 16.812541] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 16.812621] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 16.830358] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 16.835376] RPC: Registered named UNIX socket transport module. [ 16.835377] RPC: Registered udp transport module. [ 16.835378] RPC: Registered tcp transport module. [ 16.835378] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 16.847720] iwlwifi 0000:04:00.0: base HW address: 7c:5c:f8:b2:df:04 [ 16.892732] intel_rapl_common: Found RAPL domain package [ 16.892735] intel_rapl_common: Found RAPL domain core [ 16.892749] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 17.045899] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 17.054987] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0 [ 17.071262] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17 [ 17.071384] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18 [ 17.071504] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19 [ 17.071658] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20 [ 22.625842] rfkill: input handler disabled [ 23.857343] rfkill: input handler enabled [ 24.282257] wlp4s0: authenticate with ac:22:05:e2:26:3a [ 24.285038] wlp4s0: send auth to ac:22:05:e2:26:3a (try 1/3) [ 24.287194] wlp4s0: authenticated [ 24.287378] wlp4s0: associating with AP with corrupt probe response [ 24.288344] wlp4s0: associate with ac:22:05:e2:26:3a (try 1/3) [ 24.298061] wlp4s0: RX AssocResp from ac:22:05:e2:26:3a (capab=0x1411 status=0 aid=1) [ 24.303382] wlp4s0: associated [ 24.303427] wlp4s0: Limiting TX power to 20 (20 - 0) dBm as advertised by ac:22:05:e2:26:3a [ 24.463453] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 381.200817] PM: suspend entry (deep) [ 381.208037] Filesystems sync: 0.007 seconds [ 381.212775] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 381.215164] OOM killer disabled. [ 381.215172] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 381.216871] wlp4s0: deauthenticating from ac:22:05:e2:26:3a by local choice (Reason: 3=DEAUTH_LEAVING) [ 381.227244] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 381.228008] sd 0:0:0:0: [sda] Stopping disk [ 381.806585] xhci_hcd 0000:02:00.0: WARN: xHC CMD_RUN timeout [ 381.806600] PM: suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 [ 381.806604] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 [ 381.806609] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x130 returns -110 [ 381.806612] PM: Device 0000:02:00.0 failed to suspend async: error -110 [ 383.877358] PM: Some devices failed to suspend, or early wake event detected [ 383.880034] sd 0:0:0:0: [sda] Starting disk [ 383.900618] jme 0000:03:00.0 enp3s0f0: Link is down [ 384.185026] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 384.185066] ata4: SATA link down (SStatus 0 SControl 300) [ 384.200108] ata3.00: configured for UDMA/133 [ 384.450962] firewire_core 0000:05:00.0: rediscovered device fw0 [ 384.521436] PM: resume devices took 0.644 seconds [ 384.521479] OOM killer enabled. [ 384.521483] Restarting tasks ... done. [ 384.978674] psmouse serio2: synaptics: queried max coordinates: x [..5692], y [..4680] [ 385.416945] video LNXVIDEO:00: Restoring backlight state [ 385.424806] PM: suspend exit [ 387.849270] wlp4s0: authenticate with ac:22:05:e2:26:3a [ 387.852579] wlp4s0: send auth to ac:22:05:e2:26:3a (try 1/3) [ 387.854623] wlp4s0: authenticated [ 387.854734] wlp4s0: associating with AP with corrupt probe response [ 387.854789] wlp4s0: associate with ac:22:05:e2:26:3a (try 1/3) [ 387.864534] wlp4s0: RX AssocResp from ac:22:05:e2:26:3a (capab=0x1411 status=0 aid=1) [ 387.873469] wlp4s0: associated [ 387.924912] wlp4s0: Limiting TX power to 20 (20 - 0) dBm as advertised by ac:22:05:e2:26:3a [ 435.275950] rfkill: input handler disabled [ 437.211111] rfkill: input handler enabled [ 569.562802] rfkill: input handler disabled [ 571.459461] rfkill: input handler enabled [ 574.717301] PM: suspend entry (deep) [ 574.810435] Filesystems sync: 0.093 seconds [ 574.813109] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 574.815488] OOM killer disabled. [ 574.815498] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 574.817225] wlp4s0: deauthenticating from ac:22:05:e2:26:3a by local choice (Reason: 3=DEAUTH_LEAVING) [ 574.830474] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 574.831284] sd 0:0:0:0: [sda] Stopping disk [ 577.180681] PM: suspend devices took 2.364 seconds [ 577.181856] ACPI: EC: interrupt blocked [ 577.194890] ACPI: Preparing to enter system sleep state S3 [ 577.196992] ACPI: EC: event blocked [ 577.196996] ACPI: EC: EC stopped [ 577.196999] PM: Saving platform NVS memory [ 577.199895] Disabling non-boot CPUs ... [ 577.201645] smpboot: CPU 1 is now offline [ 577.206403] smpboot: CPU 2 is now offline [ 577.209994] smpboot: CPU 3 is now offline [ 577.212731] IRQ 30: no longer affine to CPU4 [ 577.214244] smpboot: CPU 4 is now offline [ 577.217359] IRQ 23: no longer affine to CPU5 [ 577.217372] IRQ 33: no longer affine to CPU5 [ 577.217374] IRQ 34: no longer affine to CPU5 [ 577.217377] IRQ 40: no longer affine to CPU5 [ 577.218391] smpboot: CPU 5 is now offline [ 577.221016] IRQ 19: no longer affine to CPU6 [ 577.221023] IRQ 35: no longer affine to CPU6 [ 577.221026] IRQ 36: no longer affine to CPU6 [ 577.221029] IRQ 39: no longer affine to CPU6 [ 577.222047] smpboot: CPU 6 is now offline [ 577.225522] IRQ 31: no longer affine to CPU7 [ 577.226555] smpboot: CPU 7 is now offline [ 577.230852] ACPI: Low-level resume complete [ 577.230901] ACPI: EC: EC started [ 577.230903] PM: Restoring platform NVS memory [ 577.232959] Enabling non-boot CPUs ... [ 577.233013] x86: Booting SMP configuration: [ 577.233016] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 577.237016] CPU1 is up [ 577.237104] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 577.241535] CPU2 is up [ 577.241617] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 577.246091] CPU3 is up [ 577.246172] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 577.250143] CPU4 is up [ 577.250214] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 577.253331] CPU5 is up [ 577.253433] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 577.256656] CPU6 is up [ 577.256732] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 577.260543] CPU7 is up [ 577.269166] ACPI: Waking up from system sleep state S3 [ 577.272426] ACPI: EC: interrupt unblocked [ 577.298028] ACPI: EC: event unblocked [ 577.308289] sd 0:0:0:0: [sda] Starting disk [ 577.321978] jme 0000:03:00.0 enp3s0f0: Link is down [ 577.524373] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [ 577.551425] nouveau 0000:01:00.0: devinit: 0x00006a92[0]: script needs OR link [ 577.617659] ata4: SATA link down (SStatus 0 SControl 300) [ 577.617761] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 577.617791] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 577.618054] ata1.00: supports DRM functions and may not be fully accessible [ 577.619744] ata1.00: disabling queued TRIM support [ 577.621179] ata1.00: supports DRM functions and may not be fully accessible [ 577.621824] ata1.00: disabling queued TRIM support [ 577.622690] ata1.00: configured for UDMA/133 [ 577.622717] ata3.00: configured for UDMA/133 [ 577.852458] firewire_core 0000:05:00.0: rediscovered device fw0 [ 578.174015] PM: resume devices took 0.876 seconds [ 578.174737] OOM killer enabled. [ 578.175067] Restarting tasks ... done. [ 578.321438] psmouse serio2: synaptics: queried max coordinates: x [..5692], y [..4680] [ 579.023379] video LNXVIDEO:00: Restoring backlight state [ 579.028470] PM: suspend exit [ 581.262893] wlp4s0: authenticate with ac:22:05:e2:26:3a [ 581.265893] wlp4s0: send auth to ac:22:05:e2:26:3a (try 1/3) [ 581.270745] wlp4s0: authenticated [ 581.271024] wlp4s0: associating with AP with corrupt probe response [ 581.271375] wlp4s0: associate with ac:22:05:e2:26:3a (try 1/3) [ 581.281382] wlp4s0: RX AssocResp from ac:22:05:e2:26:3a (capab=0x1411 status=0 aid=1) [ 581.284106] wlp4s0: associated [ 581.354671] wlp4s0: Limiting TX power to 20 (20 - 0) dBm as advertised by ac:22:05:e2:26:3a [ 594.910987] rfkill: input handler disabled [ 604.278476] rfkill: input handler enabled [ 608.106842] rfkill: input handler disabled [ 617.701280] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [ 911.559028] rfkill: input handler enabled [ 914.737037] rfkill: input handler disabled [ 923.864458] rfkill: input handler enabled [ 927.499701] rfkill: input handler disabled [ 1148.070230] PM: suspend entry (deep) [ 1148.122804] Filesystems sync: 0.052 seconds [ 1148.379601] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 1148.382408] OOM killer disabled. [ 1148.382659] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1148.384670] wlp4s0: deauthenticating from ac:22:05:e2:26:3a by local choice (Reason: 3=DEAUTH_LEAVING) [ 1148.391381] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1148.394515] sd 0:0:0:0: [sda] Stopping disk [ 1151.700278] PM: suspend devices took 3.316 seconds [ 1151.701177] ACPI: EC: interrupt blocked [ 1151.714310] ACPI: Preparing to enter system sleep state S3 [ 1151.716583] ACPI: EC: event blocked [ 1151.716586] ACPI: EC: EC stopped [ 1151.716588] PM: Saving platform NVS memory [ 1151.718649] Disabling non-boot CPUs ... [ 1151.720492] smpboot: CPU 1 is now offline [ 1151.726131] smpboot: CPU 2 is now offline [ 1151.731108] smpboot: CPU 3 is now offline [ 1151.735349] irq_migrate_all_off_this_cpu: 2 callbacks suppressed [ 1151.735353] IRQ 30: no longer affine to CPU4 [ 1151.736793] smpboot: CPU 4 is now offline [ 1151.741069] IRQ 23: no longer affine to CPU5 [ 1151.741079] IRQ 33: no longer affine to CPU5 [ 1151.741084] IRQ 34: no longer affine to CPU5 [ 1151.741092] IRQ 40: no longer affine to CPU5 [ 1151.742105] smpboot: CPU 5 is now offline [ 1151.746450] IRQ 19: no longer affine to CPU6 [ 1151.746464] IRQ 35: no longer affine to CPU6 [ 1151.746469] IRQ 36: no longer affine to CPU6 [ 1151.746475] IRQ 39: no longer affine to CPU6 [ 1151.747494] smpboot: CPU 6 is now offline [ 1151.751629] IRQ 31: no longer affine to CPU7 [ 1151.752677] smpboot: CPU 7 is now offline [ 1151.757477] ACPI: Low-level resume complete [ 1151.757526] ACPI: EC: EC started [ 1151.757528] PM: Restoring platform NVS memory [ 1151.759578] Enabling non-boot CPUs ... [ 1151.759633] x86: Booting SMP configuration: [ 1151.759636] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 1151.763295] CPU1 is up [ 1151.763334] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 1151.766878] CPU2 is up [ 1151.766921] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 1151.770458] CPU3 is up [ 1151.770494] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 1151.773578] CPU4 is up [ 1151.773618] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 1151.776488] CPU5 is up [ 1151.776524] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 1151.779417] CPU6 is up [ 1151.779452] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 1151.782369] CPU7 is up [ 1151.790538] ACPI: Waking up from system sleep state S3 [ 1151.793048] ACPI: EC: interrupt unblocked [ 1151.818422] ACPI: EC: event unblocked [ 1151.828542] sd 0:0:0:0: [sda] Starting disk [ 1151.841475] jme 0000:03:00.0 enp3s0f0: Link is down [ 1152.071844] nouveau 0000:01:00.0: devinit: 0x00006a92[0]: script needs OR link [ 1152.133919] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [ 1152.144128] ata4: SATA link down (SStatus 0 SControl 300) [ 1152.144155] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1152.171187] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1152.192101] ata1.00: supports DRM functions and may not be fully accessible [ 1152.194916] ata3.00: configured for UDMA/133 [ 1152.195141] ata1.00: disabling queued TRIM support [ 1152.196415] ata1.00: supports DRM functions and may not be fully accessible [ 1152.196963] ata1.00: disabling queued TRIM support [ 1152.198120] ata1.00: configured for UDMA/133 [ 1152.458909] firewire_core 0000:05:00.0: rediscovered device fw0 [ 1152.708145] PM: resume devices took 0.890 seconds [ 1152.708443] OOM killer enabled. [ 1152.708705] Restarting tasks ... done. [ 1152.722021] rfkill: input handler enabled [ 1152.826032] psmouse serio2: synaptics: queried max coordinates: x [..5692], y [..4680] [ 1153.636274] video LNXVIDEO:00: Restoring backlight state [ 1153.639155] PM: suspend exit [ 1153.645689] rfkill: input handler disabled [ 1153.692399] jme 0000:03:00.0 enp3s0f0: Link is down [ 1159.608626] wlp4s0: authenticate with ac:22:05:e2:26:3a [ 1159.611190] wlp4s0: send auth to ac:22:05:e2:26:3a (try 1/3) [ 1159.613376] wlp4s0: authenticated [ 1159.613519] wlp4s0: associating with AP with corrupt probe response [ 1159.613776] wlp4s0: associate with ac:22:05:e2:26:3a (try 1/3) [ 1159.623913] wlp4s0: RX AssocResp from ac:22:05:e2:26:3a (capab=0x1411 status=0 aid=1) [ 1159.633398] wlp4s0: associated [ 1159.638267] wlp4s0: Limiting TX power to 20 (20 - 0) dBm as advertised by ac:22:05:e2:26:3a [ 1160.270187] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
