[RFC][PATCH v3 00/11] HiKey960 USB support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I'm just trying to pick up a patch series submitted previously
by Yu Chen to get HiKey960 dev-board's USB functionality
working.

The current full patchset can be found here:
  https://git.linaro.org/people/john.stultz/android-dev.git/log/?id=305b332b46901c82d762e44d2ef8c96107a0c94e

Previously I sent this series out as two separate series, to
try to make the review a little easier. However, the partial
series was causing some confusion as well, so this time I've
sent almost all of it in one go.

NOTE: I unfortunately don't have any deep knowledge of the
hardware other then the previously submitted code  and what I
can intuit from testing, but I tried to document the previously
undocumented bindings as best I could, fixed up a few minor
checkpatch issues and tried to address previous feedback as best
I could.

I'd greatly appreciate feedback or thoughts!

thanks
-john

New in v3:
* Avoiding adding a hisi specific dwc3 binding and instead
  trying to make the dwc core binding more flexible as suggsted
  by Rob Herring.

* Made the GCTL soft reset unconditional as suggested by
  Jack Pham.

* Given the negative feedback on the usb class role-switch
  notifier method for the hub logic to hook into, I've reworked
  the hub logic to be an usb-role-switch intermediary.

* Lots of minor fixups and cleanups, some reported by the
  kbuild test robot <lkp@xxxxxxxxx>


Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
CC: ShuFan Lee <shufan_lee@xxxxxxxxxxx>
Cc: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Cc: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
Cc: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
Cc: Yu Chen <chenyu56@xxxxxxxxxx>
Cc: Felipe Balbi <balbi@xxxxxxxxxx>
Cc: Hans de Goede <hdegoede@xxxxxxxxxx>
Cc: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Cc: Jun Li <lijun.kernel@xxxxxxxxx>
Cc: Valentin Schneider <valentin.schneider@xxxxxxx>
Cc: Jack Pham <jackp@xxxxxxxxxxxxxx>
Cc: linux-usb@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx

John Stultz (6):
  dt-bindings: usb: rt1711h: Add connector bindings
  dt-bindings: usb: dwc3: Allow clock list & resets to be more flexible
  usb: dwc3: Rework clock initialization to be more flexible
  usb: dwc3: Rework resets initialization to be more flexible
  dt-bindings: usb: generic: Add role-switch-default-host binding
  usb: dwc3: Add host-mode as default support

Yu Chen (5):
  usb: dwc3: Execute GCTL Core Soft Reset while switch modes
  usb: dwc3: Increase timeout for CmdAct cleared by device controller
  usb: dwc3: Registering a role switch in the DRD code.
  dt-bindings: misc: Add bindings for HiSilicon usb hub and data role
    switch functionality on HiKey960
  misc: hisi_hikey_usb: Driver to support usb functionality of Hikey960

 .../bindings/misc/hisilicon-hikey-usb.txt     |  40 ++++
 .../devicetree/bindings/usb/dwc3.txt          |   5 +-
 .../devicetree/bindings/usb/generic.txt       |   5 +
 .../bindings/usb/richtek,rt1711h.txt          |  29 +++
 drivers/misc/Kconfig                          |   6 +
 drivers/misc/Makefile                         |   1 +
 drivers/misc/hisi_hikey_usb.c                 | 178 ++++++++++++++++++
 drivers/usb/dwc3/Kconfig                      |   1 +
 drivers/usb/dwc3/core.c                       |  38 ++--
 drivers/usb/dwc3/core.h                       |   6 +
 drivers/usb/dwc3/drd.c                        |  78 +++++++-
 drivers/usb/dwc3/gadget.c                     |   2 +-
 12 files changed, 369 insertions(+), 20 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
 create mode 100644 drivers/misc/hisi_hikey_usb.c

-- 
2.17.1




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux