On Mon, Oct 14, 2019 at 12:02:57PM +0200, Thierry Reding wrote: > On Mon, Sep 23, 2019 at 01:55:44PM +0530, Nagarjuna Kristam wrote: > > Patches 1-3 are phy driver changes to add support for device > > mode. > > Patches 4-7 are changes related to XUSB device mode > > controller driver. > > Patch 8 is to enable drivers for XUDC support in defconfig > > > > Test Steps(USB 2.0): > > - Enable "USB Gadget precomposed configurations" in defconfig > > - Build, flash and boot Jetson TX1 > > - Connect Jetson TX1 and Ubuntu device using USB A to Micro B > > cable > > - After boot on Jetson TX1 terminal usb0 network device should be > > enumerated > > - Assign static ip to usb0 on Jetson TX1 and corresponding net > > device on ubuntu > > - Run ping test and transfer test(used scp) to check data transfer > > communication > > Hi Felipe, Kishon, Greg, > > Patches 1-3 provide new API that is required by patch 7, so I think > patches 1, 2, 3, 4 and 7 should probably all go through a single tree to > avoid having to model the dependencies using stable branches. > > Kishon, patches 1-3 have gone through several rounds of review already, > but do you have any remaining concerns on them? If not, it'd be great if > you could ack them. Felipe and Greg could then pick them up along with > patches 4 and 7 into the USB tree. > > Felipe, Greg, does that sound like a reasonable plan? Fine with me. > I should also mention that while waiting for review, Nagarjuna has been > able to extend support for the XUDC driver to Tegra186 but has so far > been holding back on sending them out so as to not needlessly hold up > progress on this series. However, given the interdependencies, I've come > to think that it may be preferable to merge everything in one go instead > of revisiting this in a couple of weeks. > > If you guys prefer, Nagarjuna could send out v11 of the series and > integrate Tegra186 support. That's also fine. thanks, greg k-h
