Re: [RFC][PATCH 3/3] usb: dwc3: Registering a role switch in the DRD code.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 03/10/2019 02:16, John Stultz wrote:
From: Yu Chen <chenyu56@xxxxxxxxxx>

The Type-C drivers use USB role switch API to inform the
system about the negotiated data role, so registering a role
switch in the DRD code in order to support platforms with
USB Type-C connectors.

Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Cc: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
Cc: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
Cc: Yu Chen <chenyu56@xxxxxxxxxx>
Cc: Felipe Balbi <balbi@xxxxxxxxxx>
Cc: Hans de Goede <hdegoede@xxxxxxxxxx>
Cc: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Cc: Jun Li <lijun.kernel@xxxxxxxxx>
Cc: Valentin Schneider <valentin.schneider@xxxxxxx>
Cc: linux-usb@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Suggested-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Signed-off-by: Yu Chen <chenyu56@xxxxxxxxxx>
Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
---
  drivers/usb/dwc3/Kconfig |  1 +
  drivers/usb/dwc3/core.h  |  6 ++++
  drivers/usb/dwc3/drd.c   | 78 +++++++++++++++++++++++++++++++++++++++-
  3 files changed, 84 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 89abc6078703..1104745c41a9 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -44,6 +44,7 @@ config USB_DWC3_DUAL_ROLE
  	bool "Dual Role mode"
  	depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
  	depends on (EXTCON=y || EXTCON=USB_DWC3)
+	select USB_ROLE_SWITCH
  	help
  	  This is the default mode of working of DWC3 controller where
  	  both host and gadget features are enabled.
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index b3cb6eec3f8f..83728157b3e9 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -25,6 +25,7 @@
  #include <linux/usb/ch9.h>
  #include <linux/usb/gadget.h>
  #include <linux/usb/otg.h>
+#include <linux/usb/role.h>
  #include <linux/ulpi/interface.h>
#include <linux/phy/phy.h>
@@ -951,6 +952,9 @@ struct dwc3_scratchpad_array {
   * @hsphy_mode: UTMI phy mode, one of following:
   *		- USBPHY_INTERFACE_MODE_UTMI
   *		- USBPHY_INTERFACE_MODE_UTMIW
+ * role_sw: usb_role_switch handle
+ * role_switch_default_mode: default operation mode of controller while
+ *			usb role is USB_ROLE_NONE.
   * @usb2_phy: pointer to USB2 PHY
   * @usb3_phy: pointer to USB3 PHY
   * @usb2_generic_phy: pointer to USB2 PHY
@@ -1085,6 +1089,8 @@ struct dwc3 {
  	struct extcon_dev	*edev;
  	struct notifier_block	edev_nb;
  	enum usb_phy_interface	hsphy_mode;
+	struct usb_role_switch	*role_sw;
+	enum usb_dr_mode	role_switch_default_mode;
u32 fladj;
  	u32			irq_gadget;
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 726100d1ac0d..95b466a7faa0 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -479,6 +479,58 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
  	return edev;
  }
+static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role)
+{
+	struct dwc3 *dwc = dev_get_drvdata(dev);
+	u32 mode;
+
+	switch (role) {
+	case USB_ROLE_HOST:
+		mode = DWC3_GCTL_PRTCAP_HOST;
+		break;
+	case USB_ROLE_DEVICE:
+		mode = DWC3_GCTL_PRTCAP_DEVICE;
+		break;
+	default:
+		if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
+			mode = DWC3_GCTL_PRTCAP_HOST;
+		else
+			mode = DWC3_GCTL_PRTCAP_DEVICE;
+		break;
+	}
+
+	dwc3_set_mode(dwc, mode);
+	return 0;
+}
+
+static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
+{
+	struct dwc3 *dwc = dev_get_drvdata(dev);
+	unsigned long flags;
+	enum usb_role role;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_HOST:
+		role = USB_ROLE_HOST;
+		break;
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		role = USB_ROLE_DEVICE;
+		break;
+	case DWC3_GCTL_PRTCAP_OTG:
+		role = dwc->current_otg_role;
+		break;
+	default:
+		if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
+			role = USB_ROLE_HOST;
+		else
+			role = USB_ROLE_DEVICE;
+		break;
+	}
+	spin_unlock_irqrestore(&dwc->lock, flags);
+	return role;
+}
+
  int dwc3_drd_init(struct dwc3 *dwc)
  {
  	int ret, irq;
@@ -487,7 +539,28 @@ int dwc3_drd_init(struct dwc3 *dwc)
  	if (IS_ERR(dwc->edev))
  		return PTR_ERR(dwc->edev);
- if (dwc->edev) {
+	if (device_property_read_bool(dwc->dev, "usb-role-switch")) {

I think we should use role switch unconditionally and get rid of the
debugfs role status/change mechanism.

+		struct usb_role_switch_desc dwc3_role_switch = {0};
+		u32 mode;
+
+		if (device_property_read_bool(dwc->dev,
+					      "role-switch-default-host")) {
+			dwc->role_switch_default_mode = USB_DR_MODE_HOST;
+			mode = DWC3_GCTL_PRTCAP_HOST;
+		} else {
+			dwc->role_switch_default_mode = USB_DR_MODE_PERIPHERAL;
+			mode = DWC3_GCTL_PRTCAP_DEVICE;
+		}
+		dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
+		dwc3_role_switch.set = dwc3_usb_role_switch_set;
+		dwc3_role_switch.get = dwc3_usb_role_switch_get;
+		dwc->role_sw = usb_role_switch_register(dwc->dev,
+							&dwc3_role_switch);
+		if (IS_ERR(dwc->role_sw))
+			return PTR_ERR(dwc->role_sw);
+
+		dwc3_set_mode(dwc, mode);
+	} else if (dwc->edev) {

Role switch should exist regardless if dwc->edev is present or not.

  		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
  		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
  					       &dwc->edev_nb);
@@ -534,6 +607,9 @@ void dwc3_drd_exit(struct dwc3 *dwc)
  {
  	unsigned long flags;
+ if (dwc->role_sw)
+		usb_role_switch_unregister(dwc->role_sw);
+
  	if (dwc->edev)
  		extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST,
  					   &dwc->edev_nb);


--
cheers,
-roger

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux