Re: [RFC][PATCH v2 4/5] dt-bindings: usb: dwc3: of-simple: add compatible for HiSi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 07, 2019 at 04:00:24PM -0700, John Stultz wrote:
> On Mon, Oct 7, 2019 at 2:11 PM Rob Herring <robh+dt@xxxxxxxxxx> wrote:
> >
> > On Mon, Oct 7, 2019 at 2:07 PM John Stultz <john.stultz@xxxxxxxxxx> wrote:
> > >
> > > On Mon, Oct 7, 2019 at 11:38 AM Rob Herring <robh+dt@xxxxxxxxxx> wrote:
> > > >
> > > > On Mon, Oct 7, 2019 at 12:56 PM John Stultz <john.stultz@xxxxxxxxxx> wrote:
> > > > >
> > > > > Add necessary compatible flag for HiSi's DWC3 so
> > > > > dwc3-of-simple will probe.
> > > > >
> > > > > Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> > > > > Cc: Felipe Balbi <balbi@xxxxxxxxxx>
> > > > > Cc: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> > > > > Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> > > > > Cc: Mark Rutland <mark.rutland@xxxxxxx>
> > > > > Cc: Yu Chen <chenyu56@xxxxxxxxxx>
> > > > > Cc: Matthias Brugger <matthias.bgg@xxxxxxxxx>
> > > > > Cc: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> > > > > Cc: linux-usb@xxxxxxxxxxxxxxx
> > > > > Cc: devicetree@xxxxxxxxxxxxxxx
> > > > > Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
> > > > > ---
> > > > > v2: Tweaked clock names as clk_usb3phy_ref didn't seem right.
> > > > > ---
> > > > >  .../devicetree/bindings/usb/hisi,dwc3.txt     | 52 +++++++++++++++++++
> > > > >  1 file changed, 52 insertions(+)
> > > > >  create mode 100644 Documentation/devicetree/bindings/usb/hisi,dwc3.txt
> > > >
> > > > Can you make this a schema.
> > >
> > > Sorry, I'm not sure exactly what you're asking. I'm guessing from
> > > grepping around you want the bindings in yaml instead (I see a few
> > > examples)?
> >
> > Yes.
> >
> > > Is there some pointer to documentation? The
> > > Documentation/devicetree/bindings/writing-bindings.txt file doesn't
> > > seem to say much on it.
> >
> > You mean Documentation/devicetree/writing-schemas.rst? There's that
> > and Documentation/devicetree/bindings/example-schema.yaml which has a
> > bunch of annotations on what each part means.
> 
> Ah! Sorry for missing that. Thanks for the pointer, though I may get
> away with dropping this one.
> 
> > > > If it's only clocks and resets for the wrapper node, just make this
> > > > all one node.
> > >
> > > Just to make sure I'm following, you're suggesting I put all the
> > > clocks/resets in the dwc3 node (renamed to usb for the node name) and
> > > not add the wrapper?
> >
> > Yes.
> >
> > > I'll have to see if that's possible. The generic dwc3 binding wants 3
> > > clocks, but I only have two in the code I've worked with (similarly it
> > > seems to only want two resets, not 4) so I'll have to see if I can
> > > figure out how to adapt that.
> >
> > Possible since commit fe8abf332b8f ("usb: dwc3: support clocks and
> > resets for DWC3 core").
> 
> Ok. It *seems* like I can get it working with the existing binding
> then. There's a little funkiness with the core expecting three clocks
> while I only have two (currently I'm duplicating the "bus_early" clk
> for "suspend". Is there a preferred way to do this sort of hack?), and
> I'm a little worried that only the first reset is being used (instead
> of the 4 specified), but it seems to work so far.

I would assume that you simply don't know how the 'suspend' clock is 
connected rather than you don't have one. But that's maybe not a 
problem you can fix.

I would make dwc3 use devm_clk_bulk_get_all and allow for less than 3 
clocks. And do a similar change for resets.


> I still suspect the dwc3-of-simple.c method might be better since it
> can handle arbitrary sets of clks and resets instead of the fixed 3 &
> 1 in the dwc3.txt binding.
> But if I can get away without having to add an extra binding here, I'd
> be happier.

Me too.

Rob



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux