This is the at91 specific part of USB host integration. The EHCI high speed
controller has a companion OHCI controller to manage USB full and low speed.
They are sharing the same IRQ line and vbus pin.
Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
---
arch/arm/mach-at91/at91sam9g45_devices.c | 56 ++++++++++++++++++++++++++++++
arch/arm/mach-at91/board-sam9m10g45ek.c | 1 +
arch/arm/mach-at91/include/mach/board.h | 1 +
3 files changed, 58 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index d746e86..c2ecbb6 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -83,6 +83,62 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
/* --------------------------------------------------------------------
+ * USB Host HS (EHCI)
+ * Needs an OHCI host for low and full speed management
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+static u64 ehci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_ehci_data;
+
+static struct resource usbh_ehci_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_EHCI_BASE,
+ .end = AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_UHPHS,
+ .end = AT91SAM9G45_ID_UHPHS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_usbh_ehci_device = {
+ .name = "atmel-ehci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_ehci_data,
+ },
+ .resource = usbh_ehci_resources,
+ .num_resources = ARRAY_SIZE(usbh_ehci_resources),
+};
+
+void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
+{
+ int i;
+
+ if (!data)
+ return;
+
+ /* Enable VBus control for UHP ports */
+ for (i = 0; i < data->ports; i++) {
+ if (data->vbus_pin[i])
+ at91_set_gpio_output(data->vbus_pin[i], 0);
+ }
+
+ usbh_ehci_data = *data;
+ at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk");
+ platform_device_register(&at91_usbh_ehci_device);
+}
+#else
+void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index b8558ea..d7251b7 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -358,6 +358,7 @@ static void __init ek_board_init(void)
at91_add_device_serial();
/* USB HS Host */
at91_add_device_usbh_ohci(&ek_usbh_hs_data);
+ at91_add_device_usbh_ehci(&ek_usbh_hs_data);
/* USB HS Device */
at91_add_device_usba(&ek_usba_udc_data);
/* SPI */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 74801d2..13640b0 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -92,6 +92,7 @@ struct at91_usbh_data {
};
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
+extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
/* NAND / SmartMedia */
struct atmel_nand_data {
--
1.5.3.7
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
