Re: [PATCH] usb: typec: hd3ss3220: hd3ss3220_probe() warn: passing zero to 'PTR_ERR'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 07, 2019 at 04:38:49PM +0100, Biju Das wrote:
> This patch fixes the warning passing zero to 'PTR_ERR' by changing the
> check from 'IS_ERR_OR_NULL' to 'IS_ERR'. Also improved the error handling
> on probe function.
> 
> Fixes: 1c48c759ef4b ("usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller")
> Reported-by: kbuild test robot <lkp@xxxxxxxxx>
> Reported-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
> Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>

OK by me. FWIW:

Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>

> ---
>  drivers/usb/typec/hd3ss3220.c | 19 +++++++++++--------
>  1 file changed, 11 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/usb/typec/hd3ss3220.c b/drivers/usb/typec/hd3ss3220.c
> index 1900910..7e5f3f7 100644
> --- a/drivers/usb/typec/hd3ss3220.c
> +++ b/drivers/usb/typec/hd3ss3220.c
> @@ -178,7 +178,7 @@ static int hd3ss3220_probe(struct i2c_client *client,
>  
>  	hd3ss3220->role_sw = fwnode_usb_role_switch_get(connector);
>  	fwnode_handle_put(connector);
> -	if (IS_ERR_OR_NULL(hd3ss3220->role_sw))
> +	if (IS_ERR(hd3ss3220->role_sw))
>  		return PTR_ERR(hd3ss3220->role_sw);
>  
>  	hd3ss3220->typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
> @@ -188,20 +188,22 @@ static int hd3ss3220_probe(struct i2c_client *client,
>  
>  	hd3ss3220->port = typec_register_port(&client->dev,
>  					      &hd3ss3220->typec_cap);
> -	if (IS_ERR(hd3ss3220->port))
> -		return PTR_ERR(hd3ss3220->port);
> +	if (IS_ERR(hd3ss3220->port)) {
> +		ret = PTR_ERR(hd3ss3220->port);
> +		goto err_put_role;
> +	}
>  
>  	hd3ss3220_set_role(hd3ss3220);
>  	ret = regmap_read(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT_CTRL, &data);
>  	if (ret < 0)
> -		goto error;
> +		goto err_unreg_port;
>  
>  	if (data & HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS) {
>  		ret = regmap_write(hd3ss3220->regmap,
>  				HD3SS3220_REG_CN_STAT_CTRL,
>  				data | HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS);
>  		if (ret < 0)
> -			goto error;
> +			goto err_unreg_port;
>  	}
>  
>  	if (client->irq > 0) {
> @@ -210,18 +212,19 @@ static int hd3ss3220_probe(struct i2c_client *client,
>  					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
>  					"hd3ss3220", &client->dev);
>  		if (ret)
> -			goto error;
> +			goto err_unreg_port;
>  	}
>  
>  	ret = i2c_smbus_read_byte_data(client, HD3SS3220_REG_DEV_REV);
>  	if (ret < 0)
> -		goto error;
> +		goto err_unreg_port;
>  
>  	dev_info(&client->dev, "probed revision=0x%x\n", ret);
>  
>  	return 0;
> -error:
> +err_unreg_port:
>  	typec_unregister_port(hd3ss3220->port);
> +err_put_role:
>  	usb_role_switch_put(hd3ss3220->role_sw);
>  
>  	return ret;
> -- 
> 2.7.4

thanks,

-- 
heikki



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux