Re: [RFC PATCH v1 2/3] usb: chipidea: set mode for usb phy driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Peter,

On Tue, Oct 8, 2019 at 6:23 AM Peter Chen <peter.chen@xxxxxxx> wrote:
>
> On 19-10-07 15:46:06, Igor Opaniuk wrote:
> > From: Igor Opaniuk <igor.opaniuk@xxxxxxxxxxx>
> >
> > After enters one specific role, notify usb phy driver.
> >
> > Signed-off-by: Li Jun <jun.li@xxxxxxx>
> > Signed-off-by: Igor Opaniuk <igor.opaniuk@xxxxxxxxxxx>
> > ---
> >
> >  drivers/usb/chipidea/ci.h | 21 ++++++++++++++++++---
> >  1 file changed, 18 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
> > index 6911aef500e9..a11d23910b12 100644
> > --- a/drivers/usb/chipidea/ci.h
> > +++ b/drivers/usb/chipidea/ci.h
> > @@ -275,9 +275,21 @@ static inline int ci_role_start(struct ci_hdrc *ci, enum ci_role role)
> >               return -ENXIO;
> >
> >       ret = ci->roles[role]->start(ci);
> > -     if (!ret)
> > -             ci->role = role;
> > -     return ret;
> > +     if (ret)
> > +             return ret;
> > +
> > +     ci->role = role;
> > +
> > +     if (ci->usb_phy) {
> > +             if (role == CI_ROLE_HOST)
> > +                     usb_phy_set_mode(ci->usb_phy,
> > +                                     USB_MODE_HOST);
> > +             else
> > +                     usb_phy_set_mode(ci->usb_phy,
> > +                                     USB_MODE_DEVICE);
> > +     }
> > +
> > +     return 0;
> >  }
> >
> >  static inline void ci_role_stop(struct ci_hdrc *ci)
> > @@ -290,6 +302,9 @@ static inline void ci_role_stop(struct ci_hdrc *ci)
> >       ci->role = CI_ROLE_END;
> >
> >       ci->roles[role]->stop(ci);
> > +
> > +     if (ci->usb_phy)
> > +             usb_phy_set_mode(ci->usb_phy, USB_MODE_NONE);
> >  }
> >
> >  static inline enum usb_role ci_role_to_usb_role(struct ci_hdrc *ci)
> > --
>
> Hi Igor,
>
> Thanks for doing that.
>
> We just find this series patch will break ARM32 multi_v7_defconfig
> build. You may need to fix it at next revision, see below.
>
>   CC [M]  drivers/gpu/drm/nouveau/nvkm/subdev/fb/gm200.o
> In file included from /home/b29397/work/projects/usb/drivers/phy/ti/phy-omap-usb2.c:20:0:
> /home/b29397/work/projects/usb/include/linux/phy/omap_control_phy.h:36:2: error: redeclaration of enumerator ‘USB_MODE_HOST’
>   USB_MODE_HOST,
>   ^~~~~~~~~~~~~
> In file included from /home/b29397/work/projects/usb/include/linux/usb/otg.h:14:0,
>                  from /home/b29397/work/projects/usb/include/linux/phy/omap_usb.h:13,
>                  from /home/b29397/work/projects/usb/drivers/phy/ti/phy-omap-usb2.c:14:
> /home/b29397/work/projects/usb/include/linux/usb/phy.h:69:2: note: previous definition of ‘USB_MODE_HOST’ was here
>   USB_MODE_HOST,
>   ^~~~~~~~~~~~~
> In file included from /home/b29397/work/projects/usb/drivers/phy/ti/phy-omap-usb2.c:20:0:
> /home/b29397/work/projects/usb/include/linux/phy/omap_control_phy.h:37:2: error: redeclaration of enumerator ‘USB_MODE_DEVICE’
>   USB_MODE_DEVICE,
>   ^~~~~~~~~~~~~~~
> In file included from /home/b29397/work/projects/usb/include/linux/usb/otg.h:14:0,
>                  from /home/b29397/work/projects/usb/include/linux/phy/omap_usb.h:13,
>                  from /home/b29397/work/projects/usb/drivers/phy/ti/phy-omap-usb2.c:14:
> /home/b29397/work/projects/usb/include/linux/usb/phy.h:70:2: note: previous definition of ‘USB_MODE_DEVICE’ was here
>   USB_MODE_DEVICE,
>   ^~~~~~~~~~~~~~~
> /home/b29397/work/projects/usb/scripts/Makefile.build:280: recipe for target 'drivers/phy/ti/phy-omap-usb2.o' failed
> make[4]: *** [drivers/phy/ti/phy-omap-usb2.o] Error 1
> make[4]: *** Waiting for unfinished jobs....
>   CC      drivers/pinctrl/qcom/pinctrl-ssbi-gpio.o
>   CC      drivers/regulator/bcm590xx-regulator.o
>   CC      drivers/pinctrl/qcom/pinctrl-spmi-mpp.o
>   CC      drivers/pinctrl/qcom/pinctrl-ssbi-mpp.o
>   CC      drivers/rpmsg/imx_rpmsg.o
>   CC [M]  drivers/rpmsg/rpmsg_core.o
>   CC      drivers/regulator/da9210-regulator.o
>   CC      drivers/gpu/drm/drm_crtc_helper.o
>   CC      drivers/pinctrl/samsung/pinctrl-exynos.o
>   CC      drivers/gpu/drm/drm_dp_helper.o
> /home/b29397/work/projects/usb/scripts/Makefile.build:497: recipe for target 'drivers/phy/ti' failed
> make[3]: *** [drivers/phy/ti] Error 2
>
> --
>
> Thanks,
> Peter Chen

Seems familiar to me, AFAIK we already fixed that in
our downstream kernel, will add the fix for v1.

Thanks!

--
Best regards - Freundliche Grüsse - Meilleures salutations

Igor Opaniuk

mailto: igor.opaniuk@xxxxxxxxx
skype: igor.opanyuk
+380 (93) 836 40 67
http://ua.linkedin.com/in/iopaniuk




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux