Hi,
This series introduces support for Tegra194 XUSB host and pad
controller. Tegra194 XUSB host and pad controller are highly
similar to the controllers found on Tegra186. Therefore, it's
possible to resue xhci-tegra.c and xusb-tegra186.c for Tegra194.
Changelog:
v3:
add change log to cover latter
v2:
xhci: tegra: Parameterize mailbox register addresses
- no change
usb: host: xhci-tegra: Add Tegra194 XHCI support
- no change
phy: tegra: xusb: Protect Tegra186 soc with config
- new patch to protect Tegra186 soc data with config
phy: tegra: xusb: Add Tegra194 support
- removed unnecessary #if/#endif pairs
- introduce new soc->supports_gen2 flag which indicate whether or not
a soc supports USB 3.1 Gen 2 speed
dt-bindings: phy: tegra: Add Tegra194 support
- fix a typo
arm64: tegra: Add XUSB and pad controller on Tegra194
- renamed xhci@3610000 with usb@3610000
- moved padctl@3520000 and usb@3610000 inside /cbb
- cleaned up "clocks" property of usb@3610000 node
- added blanks lines to visually separate blocks
arm64: tegra: Enable XUSB host in P2972-0000 board
- use capitalization of regulator names
- fix gpio property of VDD_5V_SATA regulator
JC Kuo (7):
xhci: tegra: Parameterize mailbox register addresses
usb: host: xhci-tegra: Add Tegra194 XHCI support
phy: tegra: xusb: Protect Tegra186 soc with config
phy: tegra: xusb: Add Tegra194 support
dt-bindings: phy: tegra: Add Tegra194 support
arm64: tegra: Add XUSB and pad controller on Tegra194
arm64: tegra: Enable XUSB host in P2972-0000 board
.../phy/nvidia,tegra124-xusb-padctl.txt | 16 ++
.../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 36 ++++-
.../boot/dts/nvidia/tegra194-p2972-0000.dts | 62 ++++++++
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 139 +++++++++++++++++
drivers/phy/tegra/Makefile | 1 +
drivers/phy/tegra/xusb-tegra186.c | 144 +++++++++++++-----
drivers/phy/tegra/xusb.c | 7 +
drivers/phy/tegra/xusb.h | 6 +
drivers/usb/host/xhci-tegra.c | 88 +++++++++--
9 files changed, 448 insertions(+), 51 deletions(-)
--
2.17.1
