Hi,
On 03-10-2019 12:04, Kyle Tso wrote:
Hi Hans
Could you append the TCPM log?
I've attached both good and bad logs, both start with plugging in
one of these PD charging pass-through + USB-3 + HDMI out dongles.
at a quick glance the problem
seems to be that with the 2 AMS patches added we stop transmitting
after:
[ 137.751964] Rx VDM cmd 0xff018144 type 1 cmd 4 len 1
Where as the good logs still transmits (and receives) a couple of
packets extra after this:
[ 4475.965108] Rx VDM cmd 0xff018144 type 1 cmd 4 len 1
[ 4475.965224] PD TX, header: 0x2f6f
[ 4475.968979] PD TX complete, status: 0
[ 4475.980811] PD RX, header: 0x2a4f [1]
[ 4475.980816] Rx VDM cmd 0xff018150 type 1 cmd 16 len 2
[ 4475.980929] PD TX, header: 0x216f
[ 4475.984093] PD TX complete, status: 0
[ 4475.996798] PD RX, header: 0x1c4f [1]
[ 4475.996803] Rx VDM cmd 0xff018151 type 1 cmd 17 len 1
Regards,
Hans
On Thu, Oct 3, 2019 at 5:47 PM Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
Hi Kyle,
On 20-09-2019 05:24, Kyle Tso wrote:
*** BLURB HERE ***
Kyle Tso (2):
usb: typec: tcpm: AMS and Collision Avoidance
usb: typec: tcpm: AMS for PD2.0
I've finally gotten a chance to test this on one of my own devices
which uses the tcpm framework for its Type-c port.
I am afraid that this series breaks DP altmode support,
specifically, the dp_altmode_configure() function no longer
seems to get called, leading to no pin-assignment being
selected by default and DP thus not working.
So sorry, but I have to NACK this series since it causes
regressions.
It might be easiest if you can get yourself some hardware
which supports DP altmode and uses the fusb302 Type-C
controller (which unlike your controller is actually
supported by the mainline kernel).
2 devices which have this are the original (version 1)
of the GPD win and the GPD pocket. Since the version
is not always clearly marked, make sure you get one which
has a X7-Z8750 CPU, those are the version 1 models, you
can still get these e.g. here:
https://www.geekbuying.com/item/GPD-Pocket-7-Inch-Tablet-PC-Intel-Atom-X7-Z8750-8GB-128GB-375711.html
https://www.geekbuying.com/item/GPD-Win-Intel-Z8750-Windows-10-4GB-64GB-Gamepad-Tablet-PC---Black-378018.html
These 2 devices still need 2 minor patches to hookup the DP
support, I have just finished these 2 patches up and I'm
submitting them upstream today, I will Cc you on these.
If you combine these with one of the many DP-charging pass-through
+ USB-3 out + HDMI out dongles, e.g.:
https://www.aliexpress.com/item/32953320909.html
And then after plugging in do:
cat /sys/class/typec/port0-partner/port0-partner.0/displayport/pin_assignment
This should print:
C [D]
But when I add your patches into the mix it prints just:
C D
And these debug pr_err calls never happen:
diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c
index 7845df030b72..d14f94078dd9 100644
--- a/drivers/usb/typec/altmodes/displayport.c
+++ b/drivers/usb/typec/altmodes/displayport.c
@@ -106,6 +106,7 @@ static int dp_altmode_configure(struct dp_altmode *dp, u8 con)
break;
}
+ pr_err("dp_altmode_configure pin_assign %08x conf %08x\n", pin_assign, DP_CONF_GET_PIN_ASSIGN(dp->data.conf));
/* Determining the initial pin assignment. */
if (!DP_CONF_GET_PIN_ASSIGN(dp->data.conf)) {
/* Is USB together with DP preferred */
@@ -115,6 +116,8 @@ static int dp_altmode_configure(struct dp_altmode *dp, u8 con)
else if (pin_assign & DP_PIN_ASSIGN_DP_ONLY_MASK)
pin_assign &= DP_PIN_ASSIGN_DP_ONLY_MASK;
+ pr_err("dp_altmode_configure masked pin_assign %08x\n", pin_assign);
+
if (!pin_assign)
return -EINVAL;
Regards,
Hans
[ 45.033737] Setting voltage/current limit 0 mV 0 mA
[ 45.034062] polarity 0
[ 45.034066] Requesting mux state 0, usb-role 0, orientation 0
[ 45.039791] state change INVALID_STATE -> SNK_UNATTACHED [rev1 NONE_AMS]
[ 45.040579] CC1: 0 -> 0, CC2: 0 -> 0 [state SNK_UNATTACHED, polarity 0, disconnected]
[ 45.040603] i2c-fusb302: registered
[ 45.043532] Setting voltage/current limit 0 mV 0 mA
[ 45.043543] polarity 0
[ 45.043546] Requesting mux state 0, usb-role 0, orientation 0
[ 45.045309] cc:=0
[ 45.047407] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev1 NONE_AMS]
[ 45.153486] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 45.153501] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev1 NONE_AMS]
[ 45.153510] Start toggling
[ 136.458043] CC1: 0 -> 2, CC2: 0 -> 1 [state TOGGLING, polarity 0, connected]
[ 136.458056] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS]
[ 136.458124] pending state change SRC_ATTACH_WAIT -> SNK_TRY @ 200 ms [rev1 NONE_AMS]
[ 136.659629] state change SRC_ATTACH_WAIT -> SNK_TRY [delayed 200 ms]
[ 136.659647] cc:=2
[ 136.662964] pending state change SNK_TRY -> SNK_TRY_WAIT @ 100 ms [rev1 NONE_AMS]
[ 136.771185] state change SNK_TRY -> SNK_TRY_WAIT [delayed 100 ms]
[ 136.771200] state change SNK_TRY_WAIT -> SRC_TRYWAIT [rev1 NONE_AMS]
[ 136.771207] cc:=4
[ 136.774216] pending state change SRC_TRYWAIT -> SRC_TRYWAIT_UNATTACHED @ 100 ms [rev1 NONE_AMS]
[ 136.874416] state change SRC_TRYWAIT -> SRC_TRYWAIT_UNATTACHED [delayed 100 ms]
[ 136.874427] state change SRC_TRYWAIT_UNATTACHED -> SNK_UNATTACHED [rev1 NONE_AMS]
[ 136.874434] Start toggling
[ 136.876604] state change SNK_UNATTACHED -> TOGGLING [rev1 NONE_AMS]
[ 136.935349] CC1: 2 -> 2, CC2: 1 -> 1 [state TOGGLING, polarity 0, connected]
[ 136.935356] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS]
[ 136.935376] pending state change SRC_ATTACH_WAIT -> SRC_ATTACHED @ 200 ms [rev1 NONE_AMS]
[ 137.138416] state change SRC_ATTACH_WAIT -> SRC_ATTACHED [delayed 200 ms]
[ 137.138431] polarity 0
[ 137.138438] Requesting mux state 1, usb-role 1, orientation 1
[ 137.400456] vconn:=1
[ 137.401212] vbus:=1 charge=0
[ 137.414633] pending state change SRC_ATTACHED -> SRC_UNATTACHED @ 480 ms [rev1 NONE_AMS]
[ 137.434650] VBUS on
[ 137.434656] state change SRC_ATTACHED -> SRC_STARTUP [rev1 NONE_AMS]
[ 137.435506] AMS POWER_NEGOTIATION start
[ 137.435513] cc:=4
[ 137.440580] state change SRC_STARTUP -> AMS_START [rev3 POWER_NEGOTIATION]
[ 137.440591] state change AMS_START -> SRC_SEND_CAPABILITIES [rev3 POWER_NEGOTIATION]
[ 137.440596] PD TX, header: 0x11a1
[ 137.449240] PD TX complete, status: 2
[ 137.451075] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES @ 150 ms [rev3 POWER_NEGOTIATION]
[ 137.603369] state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES [delayed 150 ms]
[ 137.603380] PD TX, header: 0x11a1
[ 137.606492] PD TX complete, status: 0
[ 137.606544] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES_TIMEOUT @ 150 ms [rev3 POWER_NEGOTIATION]
[ 137.612978] PD RX, header: 0x1042 [1]
[ 137.613001] state change SRC_SEND_CAPABILITIES -> SRC_NEGOTIATE_CAPABILITIES [rev2 POWER_NEGOTIATION]
[ 137.613171] Requested 5000 mV, 1500 mA for 1500 / 1500 mA
[ 137.613180] PD TX, header: 0x363
[ 137.617198] PD TX complete, status: 0
[ 137.617237] pending state change SRC_NEGOTIATE_CAPABILITIES -> SRC_TRANSITION_SUPPLY @ 35 ms [rev2 POWER_NEGOTIATION]
[ 137.652433] state change SRC_NEGOTIATE_CAPABILITIES -> SRC_TRANSITION_SUPPLY [delayed 35 ms]
[ 137.652444] PD TX, header: 0x566
[ 137.655955] PD TX complete, status: 0
[ 137.656164] state change SRC_TRANSITION_SUPPLY -> SRC_READY [rev2 POWER_NEGOTIATION]
[ 137.656540] AMS POWER_NEGOTIATION finished
[ 137.656973] AMS DISCOVER_IDENTITY start
[ 137.657101] PD TX, header: 0x176f
[ 137.660691] PD TX complete, status: 0
[ 137.676290] PD RX, header: 0x524f [1]
[ 137.676298] Rx VDM cmd 0xff008041 type 1 cmd 1 len 5
[ 137.677650] Identity: 177a:1120.0001
[ 137.677660] AMS DISCOVER_IDENTITY finished
[ 137.677694] AMS DISCOVER_SVIDS start
[ 137.677706] PD TX, header: 0x196f
[ 137.680918] PD TX complete, status: 0
[ 137.690755] PD RX, header: 0x244f [1]
[ 137.690767] Rx VDM cmd 0xff008042 type 1 cmd 2 len 2
[ 137.690773] SVID 1: 0xff01
[ 137.690777] AMS DISCOVER_SVIDS finished
[ 137.690799] AMS DISCOVER_MODES start
[ 137.690813] PD TX, header: 0x1b6f
[ 137.694841] PD TX complete, status: 0
[ 137.706629] PD RX, header: 0x264f [1]
[ 137.706638] Rx VDM cmd 0xff018043 type 1 cmd 3 len 2
[ 137.706644] Alternate mode 0: SVID 0xff01, VDO 1: 0x00000c05
[ 137.707886] AMS DISCOVER_MODES finished
[ 137.739303] AMS DFP_TO_UFP_ENTER_MODE start
[ 137.740205] PD TX, header: 0x1d6f
[ 137.743047] PD TX complete, status: 0
[ 137.751952] PD RX, header: 0x184f [1]
[ 137.751964] Rx VDM cmd 0xff018144 type 1 cmd 4 len 1
[ 4474.691171] CC1: 0 -> 2, CC2: 0 -> 1 [state TOGGLING, polarity 0, connected]
[ 4474.691176] state change TOGGLING -> SRC_ATTACH_WAIT
[ 4474.691192] pending state change SRC_ATTACH_WAIT -> SNK_TRY @ 200 ms
[ 4474.896231] state change SRC_ATTACH_WAIT -> SNK_TRY [delayed 200 ms]
[ 4474.896249] cc:=2
[ 4474.899518] pending state change SNK_TRY -> SNK_TRY_WAIT @ 100 ms
[ 4475.008034] state change SNK_TRY -> SNK_TRY_WAIT [delayed 100 ms]
[ 4475.008058] state change SNK_TRY_WAIT -> SRC_TRYWAIT
[ 4475.008070] cc:=4
[ 4475.011131] pending state change SRC_TRYWAIT -> SRC_TRYWAIT_UNATTACHED @ 100 ms
[ 4475.119009] state change SRC_TRYWAIT -> SRC_TRYWAIT_UNATTACHED [delayed 100 ms]
[ 4475.119039] state change SRC_TRYWAIT_UNATTACHED -> SNK_UNATTACHED
[ 4475.119051] Start toggling
[ 4475.122693] state change SNK_UNATTACHED -> TOGGLING
[ 4475.181832] CC1: 2 -> 2, CC2: 1 -> 1 [state TOGGLING, polarity 0, connected]
[ 4475.181843] state change TOGGLING -> SRC_ATTACH_WAIT
[ 4475.181879] pending state change SRC_ATTACH_WAIT -> SRC_ATTACHED @ 200 ms
[ 4475.383256] state change SRC_ATTACH_WAIT -> SRC_ATTACHED [delayed 200 ms]
[ 4475.383268] polarity 0
[ 4475.383272] Requesting mux state 1, usb-role 1, orientation 1
[ 4475.647963] vconn:=1
[ 4475.648307] vbus:=1 charge=0
[ 4475.666560] pending state change SRC_ATTACHED -> SRC_UNATTACHED @ 480 ms
[ 4475.685693] VBUS on
[ 4475.685697] state change SRC_ATTACHED -> SRC_STARTUP
[ 4475.685822] state change SRC_STARTUP -> SRC_SEND_CAPABILITIES
[ 4475.685826] PD TX, header: 0x11a1
[ 4475.693636] PD TX complete, status: 2
[ 4475.693663] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES @ 150 ms
[ 4475.846995] state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES [delayed 150 ms]
[ 4475.847008] PD TX, header: 0x11a1
[ 4475.851029] PD TX complete, status: 0
[ 4475.851195] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES_TIMEOUT @ 150 ms
[ 4475.857173] PD RX, header: 0x1042 [1]
[ 4475.857186] state change SRC_SEND_CAPABILITIES -> SRC_NEGOTIATE_CAPABILITIES
[ 4475.857212] Requested 5000 mV, 1500 mA for 1500 / 1500 mA
[ 4475.857220] PD TX, header: 0x363
[ 4475.860901] PD TX complete, status: 0
[ 4475.860970] pending state change SRC_NEGOTIATE_CAPABILITIES -> SRC_TRANSITION_SUPPLY @ 35 ms
[ 4475.897261] state change SRC_NEGOTIATE_CAPABILITIES -> SRC_TRANSITION_SUPPLY [delayed 35 ms]
[ 4475.897290] PD TX, header: 0x566
[ 4475.901901] PD TX complete, status: 0
[ 4475.902200] state change SRC_TRANSITION_SUPPLY -> SRC_READY
[ 4475.902549] PD TX, header: 0x176f
[ 4475.906360] PD TX complete, status: 0
[ 4475.921523] PD RX, header: 0x524f [1]
[ 4475.921530] Rx VDM cmd 0xff008041 type 1 cmd 1 len 5
[ 4475.921555] Identity: 177a:1120.0001
[ 4475.921570] PD TX, header: 0x196f
[ 4475.925036] PD TX complete, status: 0
[ 4475.935315] PD RX, header: 0x244f [1]
[ 4475.935322] Rx VDM cmd 0xff008042 type 1 cmd 2 len 2
[ 4475.935326] SVID 1: 0xff01
[ 4475.935343] PD TX, header: 0x1b6f
[ 4475.939463] PD TX complete, status: 0
[ 4475.950648] PD RX, header: 0x264f [1]
[ 4475.950661] Rx VDM cmd 0xff018043 type 1 cmd 3 len 2
[ 4475.950674] Alternate mode 0: SVID 0xff01, VDO 1: 0x00000c05
[ 4475.951938] PD TX, header: 0x1d6f
[ 4475.955930] PD TX complete, status: 0
[ 4475.965103] PD RX, header: 0x184f [1]
[ 4475.965108] Rx VDM cmd 0xff018144 type 1 cmd 4 len 1
[ 4475.965224] PD TX, header: 0x2f6f
[ 4475.968979] PD TX complete, status: 0
[ 4475.980811] PD RX, header: 0x2a4f [1]
[ 4475.980816] Rx VDM cmd 0xff018150 type 1 cmd 16 len 2
[ 4475.980929] PD TX, header: 0x216f
[ 4475.984093] PD TX complete, status: 0
[ 4475.996798] PD RX, header: 0x1c4f [1]
[ 4475.996803] Rx VDM cmd 0xff018151 type 1 cmd 17 len 1
