While the original bindings that were superseeded by the YAML schemas
didn't mention that phy-names was needed, it turns out that phy-names is
required if phys is set according to phy/phy-bindings.txt.
Let's add back those properties.
Fixes: 14ec072a19ad ("dt-bindings: usb: Convert USB HCD generic binding to YAML")
Fixes: c93bcace1098 ("dt-bindings: usb: Convert the generic OHCI binding to YAML")
Fixes: c3e2485d5f4f ("dt-bindings: usb: Convert the generic EHCI binding to YAML")
Reported-by: Emmanuel Vadot <manu@xxxxxxxxxxxxxxxx>
Signed-off-by: Maxime Ripard <mripard@xxxxxxxxxx>
---
Documentation/devicetree/bindings/usb/generic-ehci.yaml | 7 ++++++-
Documentation/devicetree/bindings/usb/generic-ohci.yaml | 7 ++++++-
Documentation/devicetree/bindings/usb/usb-hcd.yaml | 5 +++++
3 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index 059f6ef1ad4a..1ca64c85191a 100644
--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -63,7 +63,11 @@ properties:
description:
Set this flag to force EHCI reset after resume.
- phys: true
+ phys:
+ description: PHY specifier for the USB PHY
+
+ phy-names:
+ const: usb
required:
- compatible
@@ -89,6 +93,7 @@ examples:
interrupts = <39>;
clocks = <&ahb_gates 1>;
phys = <&usbphy 1>;
+ phy-names = "usb";
};
...
diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
index da5a14becbe5..bcffec1f1341 100644
--- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
@@ -67,7 +67,11 @@ properties:
description:
Overrides the detected port count
- phys: true
+ phys:
+ description: PHY specifier for the USB PHY
+
+ phy-names:
+ const: usb
required:
- compatible
@@ -84,6 +88,7 @@ examples:
interrupts = <64>;
clocks = <&usb_clk 6>, <&ahb_gates 2>;
phys = <&usbphy 1>;
+ phy-names = "usb";
};
...
diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
index 9c8c56d3a792..7263b7f2b510 100644
--- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
@@ -18,8 +18,13 @@ properties:
description:
List of all the USB PHYs on this HCD
+ phy-names:
+ description:
+ Name specifier for the USB PHY
+
examples:
- |
usb {
phys = <&usb2_phy1>, <&usb3_phy1>;
+ phy-names = "usb";
};
--
2.23.0
