We currently differentiate between SW CM and ICM by looking directly at
the sw->config.enabled field which may be rather hard to understand for
the casual reader. For this reason introduce a wrapper function with
documentation that should make the intention more clear.
Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
---
drivers/thunderbolt/lc.c | 4 ++--
drivers/thunderbolt/switch.c | 4 ++--
drivers/thunderbolt/tb.h | 14 ++++++++++++++
3 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/thunderbolt/lc.c b/drivers/thunderbolt/lc.c
index ae1e92611c3e..af38076088f6 100644
--- a/drivers/thunderbolt/lc.c
+++ b/drivers/thunderbolt/lc.c
@@ -94,7 +94,7 @@ int tb_lc_configure_link(struct tb_switch *sw)
struct tb_port *up, *down;
int ret;
- if (!sw->config.enabled || !tb_route(sw))
+ if (!tb_route(sw) || tb_switch_is_icm(sw))
return 0;
up = tb_upstream_port(sw);
@@ -124,7 +124,7 @@ void tb_lc_unconfigure_link(struct tb_switch *sw)
{
struct tb_port *up, *down;
- if (sw->is_unplugged || !sw->config.enabled || !tb_route(sw))
+ if (sw->is_unplugged || !tb_route(sw) || tb_switch_is_icm(sw))
return;
up = tb_upstream_port(sw);
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index 5ea8db667e83..f9efd670d032 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -986,7 +986,7 @@ static int tb_plug_events_active(struct tb_switch *sw, bool active)
u32 data;
int res;
- if (!sw->config.enabled)
+ if (tb_switch_is_icm(sw))
return 0;
sw->config.plug_events_delay = 0xff;
@@ -1710,7 +1710,7 @@ static int tb_switch_add_dma_port(struct tb_switch *sw)
}
/* Root switch DMA port requires running firmware */
- if (!tb_route(sw) && sw->config.enabled)
+ if (!tb_route(sw) && !tb_switch_is_icm(sw))
return 0;
sw->dma_port = dma_port_alloc(sw);
diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
index 6407d529871d..1565af2e48cb 100644
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -591,6 +591,20 @@ static inline bool tb_switch_is_fr(const struct tb_switch *sw)
}
}
+/**
+ * tb_switch_is_icm() - Is the switch handled by ICM firmware
+ * @sw: Switch to check
+ *
+ * In case there is a need to differentiate whether ICM firmware or SW CM
+ * is handling @sw this function can be called. It is valid to call this
+ * after tb_switch_alloc() and tb_switch_configure() has been called
+ * (latter only for SW CM case).
+ */
+static inline bool tb_switch_is_icm(const struct tb_switch *sw)
+{
+ return !sw->config.enabled;
+}
+
int tb_wait_for_port(struct tb_port *port, bool wait_if_unplugged);
int tb_port_add_nfc_credits(struct tb_port *port, int credits);
int tb_port_set_initial_credits(struct tb_port *port, u32 credits);
--
2.23.0
