https://bugzilla.kernel.org/show_bug.cgi?id=204905
kernel 5.2.14 , 4.19.73
ASMEDIA Bridge - ATAPI support
Dear kernel developers,
I have bought a SATA to USB3 Adapter by Delock, which supports optical drives (ATAPI support) , ASMEDIA Bridge.
Chipset: Asmedia ASM1351
But it is not working with optical drives (hdd and ssd work) , see kernel messages. I also disabled uas for testing, but no success.
Is it possible to add ATAPI support for this device?
Thanks, Bernhard
https://www.delock.de/produkte/G_62715/merkmale.html?setLanguage=en
https://www.delock.de/produkte/G_62715/technische_details.html
ASMT 2135
idVendor=174c, idProduct=55aa
[27003.336349] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[27003.383774] usb 4-1: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[27003.383776] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[27003.383778] usb 4-1: Product: ASM105x
[27003.383779] usb 4-1: Manufacturer: ASMT
[27003.383780] usb 4-1: SerialNumber: 123546400035
[27003.447065] usb-storage 4-1:1.0: USB Mass Storage device detected
[27003.447176] usb-storage 4-1:1.0: Quirks match for vid 174c pid 55aa: c00000
[27003.447207] scsi host0: usb-storage 4-1:1.0
[27003.447353] usbcore: registered new interface driver usb-storage
[27003.451028] usbcore: registered new interface driver uas
[27004.464296] scsi 0:0:0:0: Direct-Access ASMT 2135 0 PQ: 0 ANSI: 6
[27004.464554] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[27004.478120] sd 0:0:0:0: [sda] Attached SCSI removable disk
[27137.900469] usb 4-1: USB disconnect, device number 2
[27138.593741] usb 4-1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[27138.631353] usb 4-1: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[27138.631355] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[27138.631356] usb 4-1: Product: ASM105x
[27138.631357] usb 4-1: Manufacturer: ASMT
[27138.631358] usb 4-1: SerialNumber: 123546400035
[27138.638885] usb 4-1: UAS is blacklisted for this device, using usb-storage instead
[27138.638886] usb-storage 4-1:1.0: USB Mass Storage device detected
[27138.639048] usb-storage 4-1:1.0: Quirks match for vid 174c pid 55aa: c00000
[27138.639093] scsi host0: usb-storage 4-1:1.0
[27139.654238] scsi host0: scsi scan: INQUIRY result too short (5), using 36
[27139.654242] scsi 0:0:0:0: Direct-Access PQ: 0 ANSI: 0
[27139.654505] sd 0:0:0:0: Attached scsi generic sg0 type 0
[27173.844235] usb 4-1: Device not responding to setup address.
[27178.013590] usb 4-1: Device not responding to setup address.
[27178.229705] usb 4-1: device not accepting address 3, error -71
[27182.503739] usb 4-1: Device not responding to setup address.
[27186.673101] usb 4-1: Device not responding to setup address.
[27186.899538] usb 4-1: device not accepting address 3, error -71
sudo lsusb -v -d 174c:55aa
Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Name: ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x174c ASMedia Technology Inc.
idProduct 0x55aa Name: ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
bcdDevice 1.00
iManufacturer 2 ASMT
iProduct 3 ASM105x
iSerial 1 123546400035
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x002c
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x002a
bNumDeviceCaps 3
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x0000f41e
BESL Link Power Management (LPM) Supported
BESL value 1024 us
Deep BESL value 61440 us
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
SuperSpeedPlus USB Device Capability:
bLength 20
bDescriptorType 16
bDevCapabilityType 10
bmAttributes 0x00000001
Sublink Speed Attribute count 1
Sublink Speed ID count 0
wFunctionalitySupport 0x0000
bmSublinkSpeedAttr[0] 0x000a4030
Speed Attribute ID: 0 10Gb/s Symmetric RX SuperSpeedPlus
bmSublinkSpeedAttr[1] 0x000a40b0
Speed Attribute ID: 0 10Gb/s Symmetric TX SuperSpeedPlus
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
