Re: [PATCH 1/4] dt-bindings: usb: usb251xb: add documentation for voltage supply

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17/09/2019 16:44, Marco Felsch wrote:
Add the optional voltage supply documentation. If not specified the
dummy-regulator is used.

Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>

Hi,
please feel free to add:

Acked-by: Richard Leitner <richard.leitner@xxxxxxxxxxx>

regards;Richard.L

---
  Documentation/devicetree/bindings/usb/usb251xb.txt | 1 +
  1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
index 17915f64b8ee..4d5808b1cee0 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
@@ -12,6 +12,7 @@ Required properties :
Optional properties :
   - reset-gpios : Should specify the gpio for hub reset
+ - vdd-supply : Should specify the phandle to the regulator supplying vdd
   - skip-config : Skip Hub configuration, but only send the USB-Attach command
   - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424)
   - product-id : Set USB Product ID of the hub (16 bit, default depends on type)




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux