[Patch V8 2/8] phy: tegra: xusb: Add usb3 port fake support on Tegra210

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tegra210, usb2 only otg/peripheral ports dont work in device mode.
They need an assosciated usb3 port to work in device mode. Identify
an unused usb3 port and assign it as a fake USB3 port to USB2 only
port whose mode is otg/peripheral.

Based on work by BH Hsieh <bhsieh@xxxxxxxxxx>.

Signed-off-by: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
Acked-by: Thierry Reding <treding@xxxxxxxxxx>
---
 drivers/phy/tegra/xusb-tegra210.c | 56 +++++++++++++++++++++++++++++++++
 drivers/phy/tegra/xusb.c          | 65 +++++++++++++++++++++++++++++++++++++++
 drivers/phy/tegra/xusb.h          |  2 ++
 3 files changed, 123 insertions(+)

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 0351c4a..8c31f03 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -50,6 +50,7 @@
 #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_SHIFT(x) ((x) * 5)
 #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(x) (0x7 << ((x) * 5))
 #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(x, v) (((v) & 0x7) << ((x) * 5))
+#define XUSB_PADCTL_SS_PORT_MAP_PORT_DISABLED 0x7
 
 #define XUSB_PADCTL_ELPG_PROGRAM1 0x024
 #define XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN (1 << 31)
@@ -944,6 +945,34 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 
 	priv = to_tegra210_xusb_padctl(padctl);
 
+	if (port->usb3_port_fake != -1) {
+		value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
+		value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(
+					port->usb3_port_fake);
+		value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(
+					port->usb3_port_fake, index);
+		padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP);
+
+		value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+		value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_VCORE_DOWN(
+					port->usb3_port_fake);
+		padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+		usleep_range(100, 200);
+
+		value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+		value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(
+					port->usb3_port_fake);
+		padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+		usleep_range(100, 200);
+
+		value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+		value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(
+					port->usb3_port_fake);
+		padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+	}
+
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
 	value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_MASK <<
 		    XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_SHIFT) |
@@ -1078,6 +1107,32 @@ static int tegra210_usb2_phy_power_off(struct phy *phy)
 
 	mutex_lock(&padctl->lock);
 
+	if (port->usb3_port_fake != -1) {
+		value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+		value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(
+					port->usb3_port_fake);
+		padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+		usleep_range(100, 200);
+
+		value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+		value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(
+					port->usb3_port_fake);
+		padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+		usleep_range(250, 350);
+
+		value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+		value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_VCORE_DOWN(
+					port->usb3_port_fake);
+		padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+		value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
+		value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(port->usb3_port_fake,
+					XUSB_PADCTL_SS_PORT_MAP_PORT_DISABLED);
+		padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP);
+	}
+
 	if (WARN_ON(pad->enable == 0))
 		goto out;
 
@@ -2052,6 +2107,7 @@ const struct tegra_xusb_padctl_soc tegra210_xusb_padctl_soc = {
 	.ops = &tegra210_xusb_padctl_ops,
 	.supply_names = tegra210_xusb_padctl_supply_names,
 	.num_supplies = ARRAY_SIZE(tegra210_xusb_padctl_supply_names),
+	.need_fake_usb3_port = true,
 };
 EXPORT_SYMBOL_GPL(tegra210_xusb_padctl_soc);
 
diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index 2ea8497..b4b217e 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -800,9 +800,62 @@ static void __tegra_xusb_remove_ports(struct tegra_xusb_padctl *padctl)
 	}
 }
 
+static int tegra_xusb_find_unused_usb3_port(struct tegra_xusb_padctl *padctl)
+{
+	struct device_node *np;
+	unsigned int i;
+
+	for (i = 0; i < padctl->soc->ports.usb3.count; i++) {
+		np = tegra_xusb_find_port_node(padctl, "usb3", i);
+		if (!np || !of_device_is_available(np))
+			return i;
+	}
+
+	return -ENODEV;
+}
+
+static bool tegra_xusb_port_is_companion(struct tegra_xusb_usb2_port *usb2)
+{
+	unsigned int i;
+	struct tegra_xusb_usb3_port *usb3;
+	struct tegra_xusb_padctl *padctl = usb2->base.padctl;
+
+	for (i = 0; i < padctl->soc->ports.usb3.count; i++) {
+		usb3 = tegra_xusb_find_usb3_port(padctl, i);
+		if (usb3 && usb3->port == usb2->base.index)
+			return true;
+	}
+
+	return false;
+}
+
+static int tegra_xusb_update_usb3_fake_port(struct tegra_xusb_usb2_port *usb2)
+{
+	int fake;
+
+	/* Disable usb3_port_fake usage by default and assign if needed */
+	usb2->usb3_port_fake = -1;
+
+	if ((usb2->mode == USB_DR_MODE_OTG ||
+	     usb2->mode == USB_DR_MODE_PERIPHERAL) &&
+		!tegra_xusb_port_is_companion(usb2)) {
+		fake = tegra_xusb_find_unused_usb3_port(usb2->base.padctl);
+		if (fake < 0) {
+			dev_err(&usb2->base.dev, "no unused USB3 ports available\n");
+			return -ENODEV;
+		}
+
+		dev_dbg(&usb2->base.dev, "Found unused usb3 port: %d\n", fake);
+		usb2->usb3_port_fake = fake;
+	}
+
+	return 0;
+}
+
 static int tegra_xusb_setup_ports(struct tegra_xusb_padctl *padctl)
 {
 	struct tegra_xusb_port *port;
+	struct tegra_xusb_usb2_port *usb2;
 	unsigned int i;
 	int err = 0;
 
@@ -832,6 +885,18 @@ static int tegra_xusb_setup_ports(struct tegra_xusb_padctl *padctl)
 			goto remove_ports;
 	}
 
+	if (padctl->soc->need_fake_usb3_port) {
+		for (i = 0; i < padctl->soc->ports.usb2.count; i++) {
+			usb2 = tegra_xusb_find_usb2_port(padctl, i);
+			if (!usb2)
+				continue;
+
+			err = tegra_xusb_update_usb3_fake_port(usb2);
+			if (err < 0)
+				goto remove_ports;
+		}
+	}
+
 	list_for_each_entry(port, &padctl->ports, list) {
 		err = port->ops->enable(port);
 		if (err < 0)
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index 093076c..bd91832 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -291,6 +291,7 @@ struct tegra_xusb_usb2_port {
 	struct regulator *supply;
 	enum usb_dr_mode mode;
 	bool internal;
+	int usb3_port_fake;
 };
 
 static inline struct tegra_xusb_usb2_port *
@@ -389,6 +390,7 @@ struct tegra_xusb_padctl_soc {
 
 	const char * const *supply_names;
 	unsigned int num_supplies;
+	bool need_fake_usb3_port;
 };
 
 struct tegra_xusb_padctl {
-- 
2.7.4




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux