On Wed, Sep 04, 2019 at 10:54:28AM +0300, Felipe Balbi wrote: > > Hi, > > <Jacky.Cao@xxxxxxxx> writes: > > > The power budget for SuperSpeed mode should be 900 mA > > according to USB3.0 specification, so set the power > > budget to 900 mA for dummy_start_ss which is only used > > for SuperSpeed mode. > > > > If the max power consumption of SuperSpeed device is > > larger than 500 mA, insufficient available bus power > > error happens in usb_choose_configuration function > > when the device connects to dummy hcd. > > > > Signed-off-by: Jacky Cao <Jacky.Cao@xxxxxxxx> > > --- > > drivers/usb/gadget/udc/dummy_hcd.c | 3 ++- > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c > > index 8414fac..52f2cf5 100644 > > --- a/drivers/usb/gadget/udc/dummy_hcd.c > > +++ b/drivers/usb/gadget/udc/dummy_hcd.c > > @@ -48,6 +48,7 @@ > > #define DRIVER_VERSION "02 May 2005" > > > > #define POWER_BUDGET 500 /* in mA; use 8 for low-power port testing */ > > +#define POWER_BUDGET_3_0 900 /* in mA */ > > > > static const char driver_name[] = "dummy_hcd"; > > static const char driver_desc[] = "USB Host+Gadget Emulator"; > > @@ -2432,7 +2433,7 @@ static int dummy_start_ss(struct dummy_hcd *dum_hcd) > > dum_hcd->rh_state = DUMMY_RH_RUNNING; > > dum_hcd->stream_en_ep = 0; > > INIT_LIST_HEAD(&dum_hcd->urbp_list); > > - dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET; > > + dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3_0; > > dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING; > > dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1; > > #ifdef CONFIG_USB_OTG > > Alan, I suppose you're okay with this change? I'm not ok with the whitespace damage making this patch impossible to apply :)
