Re: [PATCH 0/4] musb host improvments mostly for omap2430 glue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi!

> So I ended up cleaning up omap2430 glue layer a bit for host mode with the
> various reproducable errors I was seeing docking droid4 to a lapdock. There
> are a few fixes, and then we end up removing all the devctl register tinkering
> for omap2430 glue layer.

I should have your recent patches up-to [PATCH] power: supply:
cpcap-charger: Enable vbus boost voltage applied to linux-next, -0830.

So... to get usb host to work even with stock kernel, I need a hub and
external power... and "right" cable between phone and hub.

When I plugged/unplugged it several times, I got

### usb unplug:
musb-hdrc.0.auto: musb_set_peripheral: already in peripheral mode: 80
musb-hdrc.0.auto: musb_set_peripheral: already in peripheral mode: 80
ub0: stop stats: rx/tx 0/0, errs 0/0
l3_init_cm:clk:0040:0: failed to disable
l3_init_cm:clk:00c0:0: failed to disable
### usb plug produces nothing
### usb unplug:
musb-hdrc.0.auto: musb_set_peripheral: already in peripheral mode: 80
musb-hdrc.0.auto: musb_set_peripheral: already in peripheral mode: 80

Hmm. I did it two more times, and now machine rebooted, and USB was
powered from the phone for a while (3.6V).

And I reproduced the crash on the next boot.

Is there anything I may be missing in .config?

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux