On Thu, Aug 15, 2019 at 05:40:54PM +0000, Matthew Michilot wrote: > Enable support for cbus gpios on FT232H. The cbus configuration is > stored in one word in the EEPROM at byte-offset 0x1a with the mux You forgot to fix the copy-paste error here; it should be "two words" as I mentioned before. > config for ACBUS5, ACBUS6, ACBUS8 and ACBUS9 (only pins that can be > configured as I/O mode). > > Tested using FT232H by configuring one ACBUS pin at a time. > > Signed-off-by: Matthew Michilot <matthew.michilot@xxxxxxxxx> > Reviewed-by: Tim Harvey <tharvey@xxxxxxxxxxxxx> > --- > V2: > - made hex notation all lowercase for consistency > - allocated 4 bytes instead of 2 bytes for buffer > - improved documentation on FT232H CBUS memory mapping > - fixed CBUS pins being incorrectly mapped to the wrong gpios > - sorted case labels alphabetically Now applied after amending the commit message. Thanks, Johan
