This patch uses xhci_plat_priv.quirks to simplify. The previous
code had conditions to set some quirks in xhci_rcar_init_quirk().
But, the xhci_rcar_init_quirk() is called at the same conditions.
So, no behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
drivers/usb/host/xhci-rcar.c | 28 ----------------------------
drivers/usb/host/xhci-rcar.h | 14 ++++++++++++++
2 files changed, 14 insertions(+), 28 deletions(-)
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index 8616c52..34761be 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -107,15 +107,6 @@ static int xhci_rcar_is_gen2(struct device *dev)
of_device_is_compatible(node, "renensas,rcar-gen2-xhci");
}
-static int xhci_rcar_is_gen3(struct device *dev)
-{
- struct device_node *node = dev->of_node;
-
- return of_device_is_compatible(node, "renesas,xhci-r8a7795") ||
- of_device_is_compatible(node, "renesas,xhci-r8a7796") ||
- of_device_is_compatible(node, "renesas,rcar-gen3-xhci");
-}
-
void xhci_rcar_start(struct usb_hcd *hcd)
{
u32 temp;
@@ -226,32 +217,13 @@ static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd)
/* This function needs to initialize a "phy" of usb before */
int xhci_rcar_init_quirk(struct usb_hcd *hcd)
{
- struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-
/* If hcd->regs is NULL, we don't just call the following function */
if (!hcd->regs)
return 0;
- /*
- * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set
- * to 1. However, these SoCs don't support 64-bit address memory
- * pointers. So, this driver clears the AC64 bit of xhci->hcc_params
- * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
- * xhci_gen_setup().
- *
- * And, since the firmware/internal CPU control the USBSTS.STS_HALT
- * and the process speed is down when the roothub port enters U3,
- * long delay for the handshake of STS_HALT is neeed in xhci_suspend().
- */
- if (xhci_rcar_is_gen2(hcd->self.controller) ||
- xhci_rcar_is_gen3(hcd->self.controller)) {
- xhci->quirks |= XHCI_NO_64BIT_SUPPORT | XHCI_SLOW_SUSPEND;
- }
-
if (!xhci_rcar_wait_for_pll_active(hcd))
return -ETIMEDOUT;
- xhci->quirks |= XHCI_TRUST_TX_LENGTH;
return xhci_rcar_download_firmware(hcd);
}
diff --git a/drivers/usb/host/xhci-rcar.h b/drivers/usb/host/xhci-rcar.h
index 1f8c225..012744a 100644
--- a/drivers/usb/host/xhci-rcar.h
+++ b/drivers/usb/host/xhci-rcar.h
@@ -32,8 +32,22 @@ static inline int xhci_rcar_resume_quirk(struct usb_hcd *hcd)
}
#endif
+/*
+ * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set
+ * to 1. However, these SoCs don't support 64-bit address memory
+ * pointers. So, this driver clears the AC64 bit of xhci->hcc_params
+ * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
+ * xhci_gen_setup() by using the XHCI_NO_64BIT_SUPPORT quirk.
+ *
+ * And, since the firmware/internal CPU control the USBSTS.STS_HALT
+ * and the process speed is down when the roothub port enters U3,
+ * long delay for the handshake of STS_HALT is neeed in xhci_suspend()
+ * by using the XHCI_SLOW_SUSPEND quirk.
+ */
#define SET_XHCI_PLAT_PRIV_FOR_RCAR(firmware) \
.firmware_name = firmware, \
+ .quirks = XHCI_NO_64BIT_SUPPORT | XHCI_TRUST_TX_LENGTH | \
+ XHCI_SLOW_SUSPEND, \
.init_quirk = xhci_rcar_init_quirk, \
.plat_start = xhci_rcar_start, \
.resume_quirk = xhci_rcar_resume_quirk,
--
2.7.4
