Auto-delink requires writing special registers to ums-realtek device. Unconditionally enable auto-delink may break newer devices. So only enable auto-delink by default for the original three IDs, 0x0138, 0x0158 and 0x0159. Realtek is working on a patch to properly support auto-delink for other IDs. BugLink: https://bugs.launchpad.net/bugs/1838886 Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> --- v2: - Use auto_delink_support instead of auto_delink_enable. drivers/usb/storage/realtek_cr.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index beaffac805af..b304cca7c4fa 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -40,6 +40,10 @@ static int auto_delink_en = 1; module_param(auto_delink_en, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(auto_delink_en, "auto delink mode (0=firmware, 1=software [default])"); +static int auto_delink_support = -1; +module_param(auto_delink_support, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(auto_delink_support, "enable auto delink (-1=auto [default], 0=disable, 1=enable)"); + #ifdef CONFIG_REALTEK_AUTOPM static int ss_en = 1; module_param(ss_en, int, S_IRUGO | S_IWUSR); @@ -996,12 +1000,22 @@ static int init_realtek_cr(struct us_data *us) goto INIT_FAIL; } - if (CHECK_FW_VER(chip, 0x5888) || CHECK_FW_VER(chip, 0x5889) || - CHECK_FW_VER(chip, 0x5901)) - SET_AUTO_DELINK(chip); - if (STATUS_LEN(chip) == 16) { - if (SUPPORT_AUTO_DELINK(chip)) + if (auto_delink_support == -1) { + if (CHECK_PID(chip, 0x0138) || CHECK_PID(chip, 0x0158) || + CHECK_PID(chip, 0x0159)) + auto_delink_support = 1; + else + auto_delink_support = 0; + } + + if (auto_delink_support) { + if (CHECK_FW_VER(chip, 0x5888) || CHECK_FW_VER(chip, 0x5889) || + CHECK_FW_VER(chip, 0x5901)) SET_AUTO_DELINK(chip); + if (STATUS_LEN(chip) == 16) { + if (SUPPORT_AUTO_DELINK(chip)) + SET_AUTO_DELINK(chip); + } } #ifdef CONFIG_REALTEK_AUTOPM if (ss_en) -- 2.17.1
