When going in suspend, in Device mode, then resuming back leads
to the following:
unbalanced disables for USB_PWR_EN
WARNING: CPU: 0 PID: 163 at ../drivers/regulator/core.c:2590 _regulator_disable+0x104/0x180
Hardware name: Amlogic Meson G12A U200 Development Board (DT)
[...]
pc : _regulator_disable+0x104/0x180
lr : _regulator_disable+0x104/0x180
[...]
Call trace:
_regulator_disable+0x104/0x180
regulator_disable+0x40/0x78
dwc3_meson_g12a_otg_mode_set+0x84/0xb0
dwc3_meson_g12a_irq_thread+0x58/0xb8
irq_thread_fn+0x28/0x80
irq_thread+0x118/0x1b8
kthread+0xf4/0x120
ret_from_fork+0x10/0x18
This disables the regulator if enabled on suspend, and the reverse on
resume.
Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Reported-by: Kevin Hilman <khilman@xxxxxxxxxxxx>
Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
---
drivers/usb/dwc3/dwc3-meson-g12a.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index bca7e92a10e9..12dda04b004d 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -564,7 +564,13 @@ static int __maybe_unused dwc3_meson_g12a_runtime_resume(struct device *dev)
static int __maybe_unused dwc3_meson_g12a_suspend(struct device *dev)
{
struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
- int i;
+ int i, ret;
+
+ if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
+ ret = regulator_disable(priv->vbus);
+ if (ret)
+ return ret;
+ }
for (i = 0 ; i < PHY_COUNT ; ++i) {
phy_power_off(priv->phys[i]);
@@ -599,6 +605,12 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev)
return ret;
}
+ if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
+ ret = regulator_enable(priv->vbus);
+ if (ret)
+ return ret;
+ }
+
return 0;
}
--
2.22.0
